Sewage Sludge equipment for Water and Wastewater in USA

  • Premium

    Sludge Treatment for Cement Factories

    Incineration of sewage sludge in cement factories is becoming a more and more interesting issue worldwide. Besides that municipalities can solve the disposal problem of dewatered or dried sewage sludge, cement factories offer a perfect match for the treatment necessities of sewage sludge. The dried sludge can be used as fuel and, depending on its ...

    By ANDRITZ Separation - ANDRITZ Group Distributor in Camp Hill, PENNSYLVANIA (USA). from Process Lines Product line

  • Premium

    Aquaspir - Shaftless Dewatering Screw Screen

    To meet the growing demand of small sewage treatment plants, ANDRITZ has added the Aquaspir screen SC to its product line. This shaft less screw screen not only screens and conveys the solids, but also dewaters and compacts the screenings - all in a single integrated unit.

    By ANDRITZ Separation - ANDRITZ Group Distributor in Camp Hill, PENNSYLVANIA (USA). from Screens Product line

  • Premium

    ANDRITZ - Model EcoDry - Thermal Utilization of Sewage Sludge

    EcoDry is a simple, robust, and very efficient process for mono-incineration of sewage sludge, especially suitable for decentralized plants. Depending on the requirements of the customer, the EcoDry process can be implemented with one of the three well proven drying technologies available, namely drum drying (DDS), belt drying (BDS), and fluidized ...

    By ANDRITZ Separation - ANDRITZ Group Distributor in Camp Hill, PENNSYLVANIA (USA). from Thermal Utilization of Sludge Product line

  • Premium

    BioKube - Model Saturn - Decentral Wastewater Treatment Plant

    Modular treatment units that fit into multi-ple wastewater solutions, e.g. sedimenta-tion -or mechanical pre-treatment and bio-sludge removal. The Saturn units are installed above ground to minimize civil work and are typical used for systems between 100-2000m3.

    By BioKube A/S Distributor in Meredith, NEW HAMPSHIRE (USA). from Large Package Sewage Treatment Systems Product line

  • Premium

    Flottweg - Model C Series - Decanter Centrifuge for Wastewater and Sewage Sludge

    Requirements for the quality and efficiency of sewage treatment plants increase year after year, driven not least by the increasing costs of energy and disposal. As a result, the state of the art is now to use decanter centrifuges to dewater the incoming sludge. The high-performance centrifuges of the Flottweg C series achieve the best possible ...

    By Flottweg SE Office in Independence, KENTUCKY (USA). from Decanter Centrifuges Product line

  • Premium

    Flottweg - Model C7E - Decanter Centrifuge for Wastewater and Sewage Sludge

    The Flottweg C7E Decanter: A Centrifuge for Wastewater and Sewage Sludge. Worldwide, Flottweg C series decanters around the world process 25 million liters of sewage sludge per hour. That's just about the volume of 165,000 bathtubs - every hour! The dewatering and thickening of sewage sludge plays a decisive role in the wastewater treatment ...

    By Flottweg SE Office in Independence, KENTUCKY (USA). from Decanter Centrifuges Product line

  • Premium

    Flottweg - Model HTS - Decanter Centrifuge for Sewage Sludge Dewatering

    The Flottweg HTS Decanter: Highest Dry Matter Content for Sewage Sludge Dewatering. Transport and disposal costs, at over 70 percent, represent by far the largest cost item in sludge dewatering. A powerful dewatering assembly is thus an important criterion. With a Flottweg HTS Decanter in the C series, you can achieve the highest possible total ...

    By Flottweg SE Office in Independence, KENTUCKY (USA). from Decanter Centrifuges Product line

  • Premium

    KAHL - Sewage Sludge Pelleting Plants

    Adaptable Technology: Compacted and dust-free municipal and industrial sewage sludge can be treated further at low costs.

    By Amandus Kahl GmbH & Co. KG Office in Roswell, GEORGIA (US) (USA). from Recycling Industry - Pelleting Plants Product line

  • Sludge Stabilization

    Municipal Biosolids are often rich in nutrients such as nitrogen and phosphorus, and contain valuable microbes. The EPA 40 CFR Part 503, Standards for the Use and Disposal of Sewage Sludge requires that wastewater solids be processed or stabilized before they can be beneficially used. K-Sorb® fiber products are ideal for sludge stabilization ...

    By Ecosorb International based in Houston, TEXAS (USA).

  • Submersible Stainless Steel Mixer (150 RPM) POPR-I

    Submersible agitator for waste water treatment plants and industry (stainless steel). Five motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

    By Landia a/s Office in Cary, NORTH CAROLINA (USA). from Mixers - Submersible Mixers Product line

  • DualCat - Two Step Regenerative Catalyst System

    DualCat is a two-step regenerative catalyst system for removal of reduced Sulphur compounds (e.g. H2S and Mercaptanes), Aromatics (e.g. derivates of Benzene and Toluene) and Methane. These compounds are typically generated in anaerobic conditions such as in anaerobic digestion, biogas upgrading, sludge holding tanks and sewage pumping stations.

    By Centriair AB Office in Perris, CALIFORNIA (USA).

  • Discflo - Vertical Dry Pit Pumps

    Vertical Dry Pit Pumps are ideal for heavy-duty sewage, sludge and slurry applications. Discflo manufactures a complete line of sump and dry pit pumps for heavy-duty sewage, sludge and slurry applications. Using the unique Discpac technology, these pumps provide clog-free, low cost, long-lived operation, outperforming progressive cavity, ...

    By Discflo Corporation Inc. based in Santee, CALIFORNIA (USA).

  • Rodelta - Model SHL (OH1) - Horizontal End Suction Type, Single Stage and Single Suction Pumps

    The OH1 type, SHL pumps are horizontal end suction type, Single stage and Single suction pumps with back pull-out type design. These pumps operate at 50 Hz and 60 Hz. End suction with vertical delivery, high efficiency volute type to pass any solid that passes through the impeller and provides smooth unobstructed flow. The delivery sizes range ...

    By Rodelta Pumps International B.V. Distributor in Stafford, TEXAS (USA). from End Suction Product line

  • Model Series 39/33 - Check Valves

    The Tideflex Technologies Series 39 Slurry Duckbill Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services.   At the heart of the Series 39 Duckbill Check Valve is a fabric-reinforced elastomer check sleeve that provides thru-flow at minimum pressure drop across the valve at all times. Forward ...

    By Tideflex Technologies - a Division of Red Valve Company, Inc. based in Carnegie, PENNSYLVANIA (USA). from Tideflex Check Valves Product line

  • Model S 100 - Solids Handling Pumps

    Seltorque solids handling pumps use vortex technology to deliver market leading solids handling for the most demanding sewage, sludge and bentonite applications.

    By Selwood Limited Distributor in Brunswick, GEORGIA (US) (USA).

  • HYDRO - Quality and Reliable In-Line Grinders

    Our HYDRO In-Line grinder bolts into a pipeline and reduces the size of solids in sewage, sludge or slurries. Monster grinders provide complete protection for downstream equipment - including pumps, valves, centrifuges and heat exchangers. Two rows of sharp, steel cutters rotate slowly and with incredibly high-torque to grind large solids that ...

    By JWC Environmental based in Santa Ana, CALIFORNIA (USA). from Municipal Products - Grinders Product line

  • ErtelAlsop - Model EA 1200 & EA 1500 - Recessed Chamber Filter Presses

    ErtelAlsop is a US Based filter press manufacturer. Our EA Series sludge dewatering presses are perfect for municipal sludge and sewage sludge treatment. Supplied with lightweight, economical polypropylene plates, these chamber filter presses are ideal for processes that require 50-300 cubic feet of solids handling. With gasketed plates standard, ...

    By ErtelAlsop based in Kingston, NEW YORK (USA). from Recessed Chamber Filter Press Product line

  • Kubota Membrane - Submerged Membrane Unit (SMU)

    KUBOTA Submerged Membrane Unit (Kubota SMU) is applied to multiple wastewater treatment processes including domestic/rural, sewage and industrial all over the world. The flow pattern across the membrane is a cross-flow type, separating the mixed liquor into permeate (treated water) and activated sludge. The membrane unit consists of a diffuser ...

    By Kubota Membrane Europe Ltd. Distributor in GEORGIA (US) (USA).

  • Taskmaster - Powerful Inline Grinders

    Taskmaster Inline Grinders employ a powerful twin shaft mechanism to reduce solids in sludge, slurry and sewage pipelines. These versatile, processors reduce such materials as rags, plastics, wood, debris, tampons, sanitary napkins and more. They are invaluable in plant operations worldwide keeping pipelines flowing, reducing pump downtime and ...

    By Franklin Miller Inc. based in Livingston, NEW JERSEY (USA). from Industrial Wet Processing Product line

  • SPECTRO GENESIS - ICP Spectrometer

    The SPECTRO GENESIS is the first and only ICP-OES available with a complete set of factory methods - truly “plug & analyze” without needing to first develop a method. These factory methods cover all common environmental and industrial applications, like Water, Waste Water, Industrial Waste Water, Soil, Sewage Sludge, Filter Dust, ...

    By SPECTRO Analytical Instruments - AMETEK, Inc Office in Mahwah, NEW JERSEY (USA). from ICP Spectrometers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you