Sewage Systems Equipment For Water And Wastewater Available In Indonesia
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex Style 790 Low Headloss In-Line Rubber Check Valve design allows for a passive flow and allows the valve to be installed without having to do any modifications to existing structures or costly pre-install planning. The unique fold away design of the inner sleeve also allows for a near full port flow, allowing for quick drainage. The ProFlex Style 790 Low Headloss In-line Rubber Check ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The PROCO Series 450 Sleeve Type Pipe Connectors are used for tough demanding applications found in: Refridgeration Pump Systems, Industrial Process Piping Systems, Power Generating Plant Pump Systems, Pulp/Paper Plant Pump Systems, Water-Wastewater Sewage and control systems where lower pressure and sleeve ends are used in lieu of flanged spool type rubber expansion joints. The Series 450 Sleeve ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Non-contact discharge measurement for open wastewater channels. With the RQ-30 Niro - same as with the RQ-30 - a continuous measurement of the discharge of open rivers and channels is determined. A high quality stainless-steel housing allows the usage even in aggressive waters and wastewater, as for example in sewage, canal systems or industrial facilities. ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Discharge measurement via tracer dilution method for sewage - fluorescence. The discharge measurement is performed by using the well-established tracer-dilution method and is especially suitable for big volumes of water. It is used a fluorescent material as tracer. When using the tracer in sewage water most often a continuous insertion of a known amount of tracer is done. Two optical fluorescence ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-FLAP Check Element System is designed to prevent flooding and backflows caused by high downstream water levels. The ACU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 443-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features three convolutions and is designed for moderate movement and ease of system ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 440 BE Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Optical Brighteners (OBAs) or Fluorescent Whitening Agents (FWAs) are added to products, such as laundry soaps, detergents, or cleaning agents. Fabrics or materials absorb OBAs during the washing or cleaning process. When illuminated by ultraviolet light, they fluoresce and make products and fabrics appear brighter. ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLAP Check Flap System is designed to prevent flooding and backflows caused by high downstream water levels. The SURE-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage treatment plants is avoided and energy costs for pumping systems and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter is balanced in such a way that it will remain in a horizontal position even if the meter for instance ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 442-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. This expansion joint features two convolutions for minimal movements, higher pressure/temperature ratings, and ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Compact, portable measurement instrument for data collection of H2S concentration in channel ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLAP Floating Flap System is designed to prevent flooding and backflows caused by high downstream water levels and acts as a floating weir whose crest elevation self-adjusts. The TRU-FLAP can and has been installed at combined sewer overflow (CSO) locations, sanitary sewer overflow (SSO) locations, retention tank overflows and basin overflows. Overloading of sewer systems and sewage ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The Proco Style 445-BD Molded Expansion Joints can be used for corrosive applications that are found in industries such as chemical-petrochemical, industrial process piping systems, power generation plants, pulp/paper plants, water and wastewater sewage, and pollution control systems. Wherever metallic joints, lap joints, or PTFE and FEP-lined rubber expansion joints were previously used, the ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
We recognize that innovation in wastewater technology is of utmost importance. Main issues are how to reduce energy consumption and contribute to a circular economy. This has led to new innovative sanitation solutions such as decentralized wastewater treatment, resulting in the regeneration of valuable material, and residues that are reused for energy production. In close cooperation with our ...
-
Manufactured by MBH Pumps (Guj) Pvt. Ltd.based in INDIA
Cutter pump's activity is to decrease the span of solids. The Cutter pump's impeller drives the turning cutting activity while the stationary component is mounted at the pumps suction side. The stationary Cutter has a ring with cutting teeth or scissor like sharp edges that shred materials entering the pump. The stationary cutter has a Tungsten carbide edges that shred materials entering the ...
-
Manufactured by Red Fox Environmental Servicesbased in USA
The FoxPac Series is designed primarily for motor vessels that have limited space and weight capacity for a sewage processing system. The FoxPac Series unit is efficient, low maintenance and provides a trouble free waste disposal solution in compliance with United States Coast Guard regulations. (USCG certified Type II ...
-
Manufactured by Hydra-Tech Pumpsbased in USA
The S3TR model is designed for difficult pumping jobs where stringy solids are present. A fully recessed vortex impeller allows this pump to handle difficult solids found in sewage applications. It has the ability to pass through a 12 inch opening and continue to pump in debris laden job ...
-
Manufactured by Hertz Pascal Engineering (Shanghai) Co., Ltd.based in CHINA
With the assistance of our well known and veteran experts, we provide this remarkable WQ Series Submersible And Sewage at reasonable prices. We made it following varied standards and norms of the arena using high quality required materials and latest technology. This item is widely utilized in sewage collection systems for directing the flow of sewage water. It is appreciated in the market ...
-
Manufactured by Fruitland Manufacturingbased in CANADA
Fruitland’s RCF172 pump is the smallest of our rotary vane vacuum pumps. Available in left hand or right hand rotation, comes with 4 way diverter valve with various drive options available. The 172 series pump is primarily used on trucks servicing light septic and portable toilet ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you