Sewage Treatment equipment for Water and Wastewater in Arkansas

  • WEBTROL - Model MVGC Series - Grinder Pumps

    The WEBTROL MVGC Series Grinder pumps are designed / manufactured for the most demanding commercial / industrial applications. The hardened 304SS cutter, effectively macerates sewage into a fine slurry. A recessed, vortex impeller is designed to prevent clogging and reduce the bearing load, essentially increasing bearing life. The WEBTROL MVGC ...

    By Weber Industries, Inc. Office in Bella Vista, ARKANSAS (USA). from Submersible Pumps Product line

  • Sewer Bypass

    The diagram below shows a typical sewer bypass situation where one or more priming-assisted pumps take suction (pulls a lift) out of one sewer manhole and pumps the sewage into another manhole down the street.

    By BakerCorp Office in Little Rock, ARKANSAS (USA). from Applications our products can be used in Product line

  • Ecomembrane - Lagoon Sealing System

    Ecomembrane offers a waterproofing solution for the bottom and sides of tanks, lagoons and ponds.  Applications include landfills, water reservoirs, sewage treatment plants, storage of liquid products, storage of pollutant materials, man-made lakes, the collection of manure from livestock farms and rainwater for agriculture.

    By Ecomembrane Srl Office in North Little Rock, ARKANSAS (USA). from Other Product line

  • Utility Pumps

    Ideal Usage: Construction site dewatering, product transfer, emergency standby, sewage transfer, irrigation and farm use.

    By BakerCorp Office in Little Rock, ARKANSAS (USA). from Pumps Product line

  • Rain-for-Rent - Model DV80 - Dewatering Pumps

    The DV80 dewatering pump is usually mounted on a trailer and features the standard PowerPrime Clean Prime Venturi priming system which allows it to run continuously, unattended and even run dry

    By Rain for Rent Office in Conway, ARKANSAS (USA). from Trash and Sewage Dewatering Pumps Product line

  • Fixed Axle Tanks

    Process plant, industrial, construction, commercial and oil field applications, pipeline projects, sewage plant outages, drilling chemical storage.

    By BakerCorp Office in Little Rock, ARKANSAS (USA). from Steel Tanks Product line

  • Ecomembrane - Flexible Tanks for Liquids

    These tanks are primarily made using polyester PVC coated fabric membrane, and a polyurethane lacquer in the case of potable water storage.  Other materials can also be used to construct these closed tanks depending upon the type liquid being stored. Ecomembrane’s closed tanks are easily to fold, making storage simple when not in ...

    By Ecomembrane Srl Office in North Little Rock, ARKANSAS (USA). from Tanks for Liquids Product line

  • CEI - Supervrc Petroleum Transfer Hose

    Recommended for tank truck service, including oil field vacuum truck. Ideal for handling crude oil, salt and fresh water, tank bottoms, drilling mud, dilute solutions of hydrochloric acids, diesel fuels, and sewage transfer.

    By Chandler Equipment, Inc. based in Springdale, ARKANSAS (USA). from Gates Industrial Hose Product line

  • Premium

    Flottweg - Model C2E - Decanter Centrifuge

    The New C2E Decanter Centrifuges for Small Treatment Plants. Flottweg presents a new era of sludge dewatering for small sewage treatment plants. The C2E decanter centrifuge was developed specifically for the dewatering and thickening of smaller sludge loading rates. It features all of Flottweg's know-how in a compact, space-saving design.

    By Flottweg SE Distributor in Hot Springs, ARKANSAS (USA). from Decanter Centrifuges Product line

  • Premium

    Flottweg - Model OSE - Decanter Centrifuge

    The Flottweg OSE Decanter. Optimal Sludge Dewatering of Primary and Excess Sludge. The decomposition process in a sewage treatment facility continually generates biological sludge. To ensure a stable decomposition process in the biological cleaning stage, this biological sludge must be removed. The removed biological sludge is called surplus ...

    By Flottweg SE Distributor in Hot Springs, ARKANSAS (USA). from Decanter Centrifuges Product line

  • HYDRO - Quality and Reliable In-Line Grinders

    Our HYDRO In-Line grinder bolts into a pipeline and reduces the size of solids in sewage, sludge or slurries. Monster grinders provide complete protection for downstream equipment - including pumps, valves, centrifuges and heat exchangers. Two rows of sharp, steel cutters rotate slowly and with incredibly high-torque to grind large solids that ...

    By JWC Environmental Distributor in Hot Springs, ARKANSAS (USA). from Municipal Products - Grinders Product line

  • Submersible Stainless Steel Mixer (150 RPM) POPR-I

    Submersible agitator for waste water treatment plants and industry (stainless steel). Five motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

    By Landia Distributor in Hot Springs, ARKANSAS (USA). from Mixers - Submersible Mixers Product line

  • Model POP-I - Submersible Mixer - 300 RPM

    Submersible agitator for waste water treatment plants and industry. 10 motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

    By Landia Distributor in Hot Springs, ARKANSAS (USA). from Mixers - Submersible Mixers Product line

  • Model 1910XA - Stainless Steel Sump Pump

    1910XA Cascade series sump pumps are industrial units of heavy duty construction and furnished with suction strainer. Pump units will pass any solids that pass through the suction strainer openings. This series is constructed for installation in wet pits and will drain any area that must be kept dry and is below sewer level. Typical installations ...

    By Swaby Manufacturing Company Distributor in Hot Springs, ARKANSAS (USA). from Acid Handling Stainless Steel Product line

  • Barracuda - Model GRP 16-50 - Electric Submersible Pumps

    The installation of conventional sewer systems in areas of low population like small villages, farms or under difficult topographic conditions is often extremely expensive, mainly because of the high cost for large diameter pipework installation. HOMA provides the perfect, economical alternative with Barracuda grinder pump pressure sewage systems. ...

    By HOMA Pumpenfabrik GmbH Distributor in Hot Springs, ARKANSAS (USA). from Waste Water and Sewage Systems Product line

  • Waste Water Treatment Plant (WWTP)

    In addition to offering diffuser systems to meet any aeration capacity or process, Aquarius Technologies offers complete waste water treatment plants and sewage treatment systems for flows in the 250,000 gpd range or less. These systems can include pre-treatment, secondary clarification, pumps piping and valves. Let Aquarius Technologies be your ...

    By Aquarius Technologies, LLC Distributor in Little Rock, ARKANSAS (USA). from Treatment Plant Product line

  • Model SKB 6, SKB 9 - Packaged Submersible Pump

    SKB 6 and SKB 9 sumps are pre-assem-bled submersible pump stations, each with an anti-flotation collection sump for the drainage of buildings from below the sewer level. With the minimum of civil work and installation time it is installed, in open ground, outside the building. Installing the SKB 6 or SKB 9 is an effective and economical solution ...

    By HOMA Pumpenfabrik GmbH Distributor in Hot Springs, ARKANSAS (USA). from Waste Water and Sewage Systems Product line

  • Muffin Monster - Model 10K Series - Compact and Efficient Grinder for Sewage and Sludge

    The 10K Series Muffin Monster is a compact grinder, tough on solids in sewage and sludge applications. It fits into areas with limited space requirements while still providing the necessary power for downstream protection, and overall, reducing maintenance costs, downtime and operator inconvenience. This efficient grinding solution can solve many ...

    By JWC Environmental Distributor in Hot Springs, ARKANSAS (USA). from Municipal Products - Grinders Product line

  • Effluent Sewer Collection System

    How Effluent Sewers Work:With an Orenco Effluent Sewer, raw sewage flows from the house or business to a watertight underground tank. Only the filtered liquid portion is discharged (by either pump or gravity) to shallow, small-diameter collection lines that follow the contour of the land. Solids remain in the underground tank for passive, ...

    By Orenco Systems Inc. Distributor in ARKANSAS (USA).

  • SP Compactor Dewaterer

    The SPIRAC SP Compactor Dewaterer Press is a simple yet effective dewaterer that combines conveying, dewatering and volume reduction in one compact unit. The SPIRAC SP Press is a conveyor with a press zone at one end which makes long conveying and simultaneous dewatering an ideal systems solution. The SPIRAC SP Press offers high capacity and ...

    By SPIRAC Pty. Ltd. Distributor in Hot Springs, ARKANSAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you