Sewer Couplings Equipment For Water And Wastewater Available In Virginia
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The side channel single-impeller and single-stage blowers represent one of the main FPZ product ranges. A point of reference in many fields of application, the MS blowers are characterized by a compact design that allows a higher installation flexibility compared to other product ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The FPZ range of products consists of a family of blowers/exhausters specially designed for use in ATEX environments (ATmosphere EXplosive). The machines are suitable for transporting potentially explosive fluids such as methane, biogas and technical gases in compression and vacuum ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
KEG’s Sewer Flush Nozzle is a heavy duty cleaning nozzle that provides superior results while being more cost competitive. The power of the Sewer Flush’s 15 and 25 degree jet angles gives the operator high wall force with a wide water pattern necessary to clean large diameter pipes. The Sewer Flush Nozzle is available with replaceable steel or titanium ceramic inserts and is an ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The double stage double impeller blowers represent an evolution in terms of the fluid volume conveyed if compared to the MD family. Corresponding to 2 MD blowers in series with a single electric motor, the TD is the only machine with a configuration in which the inlet is opposite to the exhaust. The most common version has the horizontal motor, but the monobloc execution can also be installed ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The double impeller single stage blowers are equivalent to 2 MS blowers in parallel with a single electric motor. This allows an increase in the fluid volume, reaching flow rates up to 2400m3/h-60hz. Characterized by a high installation flexibility, TS blowers are designed to allow the installation of the largest number of accessories available in the ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The single impeller double stage blower family was designed as a natural evolution of MS, to allow an increase in the pressure / depression level. Characterized by similar dimensions to MS, therefore compact in size, MD represents the product family with the lowest energy consumption for the same ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The FPZ range of products consists of a family of vacuum blowers exhausters specially designed for use in ATEX environments (ATmosphere EXplosive). The machines are suitable for transporting potentially explosive fluids such as methane, biogas and technical gases in compression and vacuum ...
-
Manufactured by Bombas Omegabased in SPAIN
Due to the installation design in dry chamber, it is more suitable asurface pump, with strength guarantee, easy maintenance and easyassembly and disassembly. Indispensable if the driving is by diesel ...
-
Manufactured by Bombas Omegabased in SPAIN
Due to the dimensions of the installation, it is impossible to place ahoirzontal pump, or there is a danger of overflows or leakages withno risk of reaching the ...
-
Manufactured by Bombas Omegabased in SPAIN
Due to danger of overflows, it is necessary to place the electric motorin a separate floor from the pump, even at several meters over the ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Tobee® 6/4D-G Single Casing Sand Gravel Mining Pump with high chrome material and packing seal arrangement that used in river sand. 6x4D-G Gravel Pump is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ...
-
Manufactured by Sintech Precision Products Limitedbased in INDIA
Torque Flow Pumps is very suitable where normal stock pumps cannot handle liquids due to plugging or abrasive wear. The principal of the hydrodynamic liquid coupling is used for the energy transfer to the pumping liquid. The impeller generates a whirlpool in the casing and this whirlpool acts as a pumping element (impeller) in the casing. ...
-
Manufactured by Shijiazhuang An Pump Machinery Co., Ltdbased in CHINA
AMG Series Gravel pump mainly used for continuous conveying of high abrasive material which contain big solids, suitable for dredger dredging, absorption of gravel, dredging river, mining and metal smelting slag conveying etc. The discharge direction can be oriented in any direction of 360 degrees, easy installation and ...
-
Manufactured by Piranha Hose Products, Inc.based in USA
A yellow polyolefin tube, single high tensile synthetic fiber braid reinforcement and abrasion resistant orange polyether-urethane ...
-
Manufactured by Pompe Garbarino S.p.Abased in ITALY
Positive displacement gear pumps are used to pump thick and viscous fluids without suspended solids, at low and high temperature. Thanks to the volumetric effect of the gear, they are always self-priming with good suction characteristics; they have also a constant flow even if delivery pressure changes during operation. Internal fine tolerances make these pumps usable only with clean fluids ...
-
Manufactured by Diamond Plastics Corporationbased in USA
Diamond Plastics manufactures 18” through 60” solid-wall Sani-21™ PVC sewer pipe in accordance with ASTM F679, Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and ...
-
Manufactured by Sempa Pompa Limitedbased in TURKEY
Discharge Flange : 4" - 10". Capacity : up to 840 m³/h. Head : up to 42 m. Working Temperature : From -25 °C to + 140 °C*. Casing Pressure (Pmax) : 10 ...
-
Manufactured by Affetti Pumps s.r.l.based in ITALY
The vertical centrifugal with coupling range CGV-N, has been designed in order to obtain the best performances and a total reliability. Easy to handle, the pumps of this range are strong, compact construction, produced in their components with high thickness to give a product with the maximum strength. Suitable to transfer acid and basic solutions, the wet ends, are produced in thermoplastics ...
-
Manufactured by Westcar S.r.lbased in ITALY
ROTOFLUID hydrodynamic coupling is a mechanical component designed to transmit torque from the driving part (Motor) to the driven part (Machine) with the sole aid of oil (Force Vector). It mainly consists of a driving part (Pump), a driven part (Turbine), a main shaft, and an alignment ...
-
Manufactured by CSF Inox S.p.A.based in ITALY
Single-block version with the impeller supported directly by the electric motor shaft on the “A21” and “A23” models and with independent IEC motor with elastic coupling on the rest of the range. There is also a model with a special flange support for hydraulic motors for installation on tanker trucks. These pumps are suitable for transporting various types of liquid, such ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you