water flow modeling Downloads

  • Premium

    Portable Flow Measurement Brochure

    PCM – without compromises in practice in order to assess the hydraulic conditions of sewer networks and associated special constructions it is an indispensable prerequisite to carry out measurements within the network. This is why the use of portable and mains-independent flow measurement instruments for the detection of extraneous water, channel efficiency, sewerage master planning or ...


    By NIVUS GmbH

  • Premium

    Model PCM 4 - Portable and High Accurate Flow Measurement Transmitter Manual

    The measurement device, type PCM 4 as well as the accompanying sensors are designed to temporarily measure flow of slight to heavy polluted media in part filled and full sewers, pipes and other channels. External data can be detected and recorded as well. Additionally it is possible to drive external peripheral units ...


    By NIVUS GmbH

  • Premium

    PLUGCO - Model PTP Series - Brochure

    Model designation is Pipe Test Plug (PTP). It is totally same as Pipe Plug (PP) model except that includes bypass connection. Pipe Test Plug (PTP) connection allows water filling inside pipe line if there is no manhole access to pipe line or Pipe Test Plug (PTP) connection can be used for bypass the flow and discharge to another line with a circulating pump. ...


    By PLUGCO

  • Premium

    Aardvark - Model 09.12.SA - Aardvark Automatic Permeameter Manual

    2840 OPERATING INSTRUCTIONS ?????????DQG?????????????????????Aardvark Permeameter _________________________________________________________________________ Model 2840K2 Series Model 2840K2RIF & PC Series Manual Aardvark Measurements Automated Aardvark Measurements (0.2 ml accuracy, 50 ft operating depth) ...


    By Eijkelkamp Soil & Water

  • Hot Jet - Model HJ1SA1038HW - Single Axle Trailer Mounted Hot Water Sewer & Drain Line Jetters Brochure

    HotJet’s Trailer Mounted Sewer Drain Line Jetters are engineered for professionals and municipalities that want to get the job done right! HotJet USA’s legendary high performance units are true dual purpose – capable of cleaning 2″ to 12″ lines as a drain line jetter and also serving as a high powered power washer. Choose from our economy HotJet I series, our fully ...


    By HotJet USA

  • Model KWS - Screw Pump Brochure

    KUHN KWS archimedean screw pumps are lifting devices, which are extremely well-suited for sewage transport and as drainage pumps and are unsurpassed by any other type of pump in terms of technology and efficiency. They are mainly used as intermediate lifting stations in sewer networks, as draw and polder pumping stations, as inlet pumps for sewage treatment plants as well as sludge return ...


    By Kuhn Technische Anlagen GmbH

  • Lumberjack - Model LJ050 - Cutter Brochure

    Lumberjack is a high speed (up to 50,000 rpm), low torque multi purpose cutter. The rotation of the Lumberjack is powered by the water pressure supplied by a common sewer jetting or combination truck. Although it is designed to cut roots, many of our customers use it for cutting concrete, grease, mineral and chemical deposits, tuberculation and protruding laterals. We know of no other cutter that ...


    By Nozzteq, Inc.

  • HydroScreen - Model FSRB - Fine Bar Screen Brochure

    There are thousands of old overflows in sewer networks. When it rains, this is how considerable quantities of pollution, like sanitary articles, paper and synthetics, reach our waters. Old overflows are often at the performance limit of today’s design, which is why reconstruction through extending the overflow crest is often necessary when installing standard screens. If the narrow space ...

  • Model Style - SC - Sanitary Cartridge Valve Brochure

    The Sanitary Cartridge Valve (SC) is a stainless steel check valve for use in new or existing sanitary systems. The SC design seals on the ID of sanitary ferrules with replaceable food grade seals (Standard is FDA EPDM). The valves fits the Alfa Laval Inc. Bevel Seat and Tri-Clamp® fittings, the Waukesha Cherry Burrell® Q-Line and S-Line fittings, and others with ID dimensions equal to ...

  • RamJet - Model 850 - Truck Jetter Brochure

    Instituting a regular line maintenance program is easy with the Vactor Ramjet truck-mounted jetter. Equipped with a Vactor JetRodder® water pump, the Ramjet effectively breaks up blockages in sanitary lines, flushes out debris and scours sewer lines clean. The latest series, the RamJet 850 is available with an innovative rear hose reel shroud and Park-N-Clean(TM)  technology. ...


    By Vactor Manufacturing, Inc.

  • Model K-97 - Main Line Cleaner Brochure

    Sewage and other debris tend to accumulate in both sewer lines and in main lines leading to septic tanks. This is a common problem in both old and newer homes, as modern water saving toilets do a poor job of pushing waste out of sewage lines. This troublesome organic build-up can quickly result in clogging problems and back-ups. Roebic's K-97 Main Line Cleaner attacks this accumulated material ...


    By Roebic Laboratories, Inc.

  • HeatEco - Model C30V108 - Vertical Sewer Pipes Brochure

    HeatEco C30V108 is designed for vertical sewer pipes of big apartment houses. It will be installed in the basement of the building and all the waste water from the house can be lead through it. In a house with several entrance halls a heat exchanger should be installed in all vertical sewer pipes in order to maximize the saving of energy. The heat exchangers will then be connected with each other ...


    By Green Idea Ltd.

  • Model PRD - Rotary Pistons Pump Brochure

    The PRD-series three-lobe rotary piston vacuum pumps are highly developed products which can be used in a large variety of applications where it is necessary to convey important flows while keeping vacuum levels of up to 120 Torr (abs.). Based on a pre-intake of auxiliary atmospheric air, but maintaining the basic principle of positive displacement, the operating cycle permits reaching higher ...


    By Mapner

  • Ecolift - Model XL - Backwater Lifting Station Brochure

    With theEcoliftXL, KESSEL is now also supplying a hybrid lifting station for use in commercial buildings and multi-family homes. The advantage the hybrid lifting station has over traditional lifting stations is thatEcoliftXLuses the efficiency of natural gradient during normal operation – theEcoliftXLonly uses its pumps during times of backwater or flooding, pumping the building’s ...


    By Kessel AG

  • Model ESR31 - Simple Solar Conroller Brochure

    The ESR31-R or ESR31-D unit is a multi-purpose differential controller. A graphical display simplifies program selection and shows the position of the sensors in the hydraulic diagram. Additional information can be read in via the DL-bus. Thus, in parallel to the controller operation (solar system) it is also possible to calculate the yield (heat quantity). The range of use extends from the ...


    By Technische Alternative GmbH

  • Model BL - Swiper Black Sewer Bozzle Brochure

    BL SWIPER is our new patented sewer nozzle developed for cleaning sewers and storm water pipes in a cost-effective and resource saving manner. The construction of the BL Swiper™ is made to optimize the cleaning effect by using the water flow from the high pressure pump together with the jet streams. The water flow, through the pressure in the jets, creates a jet stream and the jet streams ...


    By AquaTeq Sweden AB

  • Sentinel - Model Condensafe - Condensate Neutraliser for Domestic Condensing Boilers - Brochure

    Condensate neutraliser for domestic condensing boilers. To effectively and safely neutralise acid waste from condensing boilers ready for discharge to drain, a Condensafe+ should be fitted in-line to the condensate discharge, ...

  • Model Style- CB, TC - Sanitary Insert Valve Brochure

    For over 50 years, the compact, fluoropolymer (PTFE/FEP/PFA), Sanitary Insert Valve has been used as the most economical solution to providing a check valve in a new or existing sanitary piping system. This valve style is designed to fit into grooved-end clamp-type fittings. Since the Sanitary Insert Valve replaces the gasket normally used with clamp joints, no extra space is required to ...

  • Aquatech - Model SJR Series - Mounted Sewer Jet Truck Brochure

    The SJR Truck-Mounted Sewer Jet is economically designed for removing sand, stones, bottles, cans, grease, sludge and other debris from sanitary and storm sewer ...

  • Model Style - 3-A- 3S - Sanitary Check Valve Brochure

    The 3-A Sanitary Check Valve is an all 316/316L stainless steel check valve with a standard 32 Ra or better finish, (consult factory for finer finish availability) for use in new or existing sanitary systems. The 3S design seals on the ID of sanitary ferrules with 3-A specified materials (standard is ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you