Only show results in Virginia? Ok

Pipe System (Sewers) equipment

  • Ring-Tite and Enviro-Tite - Piping Systems

    4' - 42' (100mm - 1050mm). Ring-Tite and Enviro-Tite piping systems are SDR35 and SDR28 sewer pipes manufactured to demanding ASTM and CSA standards. The two products are identical except for Enviro-Tite having a minimum recycled material content of 50%. Both products have tight joints that can withstand well in excess of both the ASTM and CSA ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Sewer Pipe and Fittings Product line

  • Model SLM PE 100-RC - Pipe Systems

    The SLM 3.0 enables butt welding without stripping the coat. Simpler to use, simpler to weld and greater reliability – these are the three main advantages of the new egeplast SLM® 3.0 protective pipe. The egeplast SLM 3.0 is the new generation of coated pipes made from just a single material: the media-carrying pressure pipe is made from ...

    By egeplast International GmbH based in Greven, GERMANY. from Sewage (Pressure Pipes) Product line

  • Pragma - Pipe Systems

    Pragma is a state-of-the-art system of pipes, fittings and chambers for external sewage systems. The system components are made of top quality PP-b block polypropylene co-polymer. The advantages of Pragma lies in the special pipe interior construction and patented technology. Pragma OD (outer diameter) pipe systems are manufactured in the range of ...

    By Pipelife International GmbH based in Wien, AUSTRIA. from Civils Products Product line

  • Robukan - Model SMR - Sewer Pipe System

    Sewer pipe system for municipal and domestic property drainage in the gravity system. Perfectly matching components and distinctive installation markings for wastewater or stormwater offer the perfect solution for each installation.

  • Ecopal - Double Pipes System

    Overall for the regions where grounds, sources & the environment has to be especially protected from eventual leakage of the sewage systems, Ecopal “double pipe system” represents a perfect solution to have a net with a double guaranteed tightness.

    By Industrie Polieco-Mpb srl based in Cazzago S., ITALY. from Sewage Product line

  • Profileen - Model P Series - Sewer Pipes System

    Pipes for gravity sewer in the sewage technology ask for a high chemical resistance against aggressive liquids and a high ring stiffness against outside loads. It was in 1956 when bauku entered the market with the first innovation: A pipe system made from polyethylene high density and an outside profile for more stability. Since 2008 we use as the ...

    By bauku Troisdorfer Bau- und Kunststoff GmbH based in Wiehl, GERMANY.

  • egeplast - Model SLR - Communal and Industrial Sewers Polyethylene Pipe System

    The egeplast SLR module can be used to economically renovate defective communal and industrial sewers by means of short-pipe relining. This is characterised by a high degree of environmental and cost awareness; since rehabilitation is generally from manhole to manhole, there is no need or only a limited need to break up road surfaces and for soil ...

    By egeplast International GmbH based in Greven, GERMANY. from Sewage (Gravity Pipes) Product line

  • PP Master - 3 Layer Sewer Pipe System

    The new standard in sewer construction. A powerful piece of the future: PP Master, a 3-layer sewer pipe system especially designed for public domestic water engineering made of polypropylene (PP). The combination of proven materials and innovative production technology sets the new standard in sewer construction.

    By Pipelife International GmbH based in Wien, AUSTRIA. from Civils Products Product line

  • Short-Pipe Relining System

    This technology, employed in the non-accessible diameter range, uses short PE-HD or GRP pipe modules which are passed through existing manholes and installed in the defective line.  Installation through existing manholes. Annular grouting with special compound.

    By Arkil inpipe GmbH based in Hannover, GERMANY. from Sewer Lines Product line

  • Pipes for Pressure Sewer Systems

    Used for pressure and automatic sewers. Pipes are manufactured according to the requirements of GOST 18599-83 of premium (PE-63, PE-80) high density low pressure polyethylene approved by the Ministry of Health of Ukraine. Diameters of the pipes do not exceed 630 mm, the pressure does not exceed 10 atmospheres. Pipes are black with longitudinal ...

    By Planet Plastic based in Irpen, UKRAINE. from Pipes Product line

  • SAK + Aqua-Pipe - Water Distribution System Renewal

    Aqua-Pipe is a stand-alone structural liner, designed and manufactured to be cured inside 6-inch to 16-inch water mains, eliminating the need to use the more costly and disruptive 'dig-and-replace' method of pipeline rehabilitation. Aqua-Pipe differs from liners used in alternative types of cured-in-place pipe (CIPP) technology in that it was ...

    By SAK Construction, LLC based in O`Fallon, MISSOURI (USA).

  • SaniTite - Sanitary Sewer HDPE Pipe

    Hancor has maintained an ongoing commitment to environmental solutions for more than a century. That commitment has resulted in a new top performing High Density Polyethylene (HDPE) product for the sanitary sewer market. SaniTite Sanitary Sewer HDPE Pipe delivers the features that engineers, contractors and municipalities demand – ...

    By Hancor, Inc. based in Findlay, OHIO (USA). from Pipe Product line

  • SaniTite - Model HP - Sanitary Pipe

    SaniTite HP Sanitary pipe is the most recent addition to the already proven N-12 product line and has been specifically/engineered for the gravity flow sanitary sewer market. The bell and spigot joining system provides an added factor of safety for design/engineers by including polymer reinforced bells and double gasket spigots on every stick of ...

    By Advanced Drainage Systems, Inc. (ADS) based in Hillard, OHIO (USA). from Pipe Product line

  • GEROthen - Model PE 100 - Pressure or Open Channel Sewage Pipe

    PE-HD standard pipes are used for a reliable sewage water disposal as pressure or open channel sewage (quod vide GEROblanco® ). All components are welded with each other as a system. Symptoms of damage such as ingrown roots, displacements or leakages are therefore barred. Installation into sand or fine gravel bed needs to be done according to ...

    By Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG based in Neustadt/Sachsen, GERMANY. from Piping Systems Product line

  • Sewer and Drain Pipe Programme PE

    In the sewage construction an important and usage oriented innovation is emerging with the moulded fit-tings made of polyethylene (PE). Now, complete sewage pipelines made of polyethylene can be prepared with this new programme. This omits the time consuming and expensive individual constructions and is re-placed with more efficient and cost ...

    By HakaGerodur based in Gossau SG, SWITZERLAND. from Piping Systems Product line

  • Model PE - Sewer and Seepage Pipe Fitting Programme

    Sewer and seepage pipes are used in real estate and house drainages and in the removal of surface water.

    By HakaGerodur based in Gossau SG, SWITZERLAND. from Piping Systems Product line

  • GEROthen - Pressure Pipes

    Pressure pipes are used in the gas and water supply, for sewage systems and for industrial piping.

    By HakaGerodur based in Gossau SG, SWITZERLAND. from Piping Systems Product line

  • Fırat - Residence Power Pipe and Fittings

    Fırat Residence Power Pipe and Fittings is a sound proof sewage system with its perfect physical structure, since they are produced with mineral-reinforced FRVinylFlex and PVC raw materials mix. Residence Power Pipe sewage pipe systems are ideal for structures such as villa and multi-floor houses, hospitals, hotels, industrial and sportive ...

    By FIRAT PLASTIK KAUÇUK SAN. VE TIC. AS. based in Büyükçekmece Istanbul, TURKEY. from Sanitary Piping Systems - Sewage Piping Systems Product line

  • Premium

    TiPSS - Model CPI - Corrugated Plate Interceptor

    The CPI is the basic TiPSS unit mainly used for oil-water separation. The CPI holds modular-counter-current-flow plate packs executed in GRP or Stainless Steel. The CPI basin can be executed in concrete or steel. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The ...

  • Firat - Dublex PVC Sewage Pipe and Fittings

    Firat Dublex PVC sewage pipe and fittings is ideal for structures such as villa and multi-floor houses, hospitals, hotels, industrial and sportive etc. with its features such as environment-friendly and economic and resistant against temperatures up to 60 ºC, and maintains ideal and secure drainage of foundation and indoor sewage for ...

    By FIRAT PLASTIK KAUÇUK SAN. VE TIC. AS. based in Büyükçekmece Istanbul, TURKEY. from Sanitary Piping Systems - Sewage Piping Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you