Sewage Air equipment Sewers (Water and Wastewater)

EVDOS - Model SW-DA Type - Sewage Air Relief Valve

Body: ductile iron GGG 40 or steel ST 37. Flanges: DIN 2501. Work Pressure: 10 - 16 Bar. Coating: Powder Epoxy 200 μm.

By EVDOS SA based in Thessaloniki, GREECE. from Air Relief Valve Product line

Vent-Tech - Model SWG - Combination Sewage Air Relief Valve

The Vent-Tech Model SWG sewer valve combines thirteen years of manufacturing experience with advanced Patent Pending flow designs. The Model SWG was engineered to expand and improve the technological advances of the flat float air/vacuum valve.

By International Valve Marketing, Inc. based in Sugar Grove, ILLINOIS (USA). from Vent-Tech Sewer Valve Line-up Product line

Premium

BioFicient - Sewage Treatment Systems

The BioFicient has been specially designed for shallow dig applications, allowing for an unobtrusive below ground installation. Its unique design features include its low profile and extension neck, saving on-site time and expense.

By Kingspan Environmental Ltd based in Co. Armagh, NORTHERN IRELAND. from Sewage Treatment Plants Product line

Premium

ANDRITZ - Model EcoDry - Thermal Utilization of Sewage Sludge

EcoDry is a simple, robust, and very efficient process for mono-incineration of sewage sludge, especially suitable for decentralized plants. Depending on the requirements of the customer, the EcoDry process can be implemented with one of the three well proven drying technologies available, namely drum drying (DDS), belt drying (BDS), and fluidized ...

By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Thermal Utilization of Sludge Product line

Premium

AERZEN Turbo Generation - Model 5 - Turbo Blowers Generation for Sewage Treatment Processes

For the maximum of energy efficiency in waste water treatment. Designed to handle unsolved energy problems. This is the key unit for more energy efficiency, as single oder combination design – and the power behind every municipal or industrial waste disposal facility: the AERZEN Turbo Generation 5. Unbeatable, AERZEN’s mix of blower, hybrid and ...

By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Turbo Blowers Product line

Premium

ASTIM - Sewage Treatment Plants

Astim package unit plants with full aerobic activated sludge processes eliminate the odor nuisance and other disturbing problems of sewage.There are two kinds of package system. One of them is Sequential Batch Reactor (SBR), the other one is Continuous System (CSR).

By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Package Type Treatment Systems Product line

SEWAIR - Model MINI - Pressure Sewer Air Release Valve

Cast iron body-stainless steel trim. Threaded female x female connections. NITRILE (Buna-N) seat. 1/4” orifice for waste water application. Vents under line pressure. Temp Max: 150° F (65 C)Inlet Pressure Max: 150 PSI. Size(s): 2 to 3 in. (15 to 80 mm)

By Flomatic Corporation based in Glens Falls,, NEW YORK (USA). from Air Release Valves (Sewage) Product line

SEWAIR - Model MAXI - Air and Vacuum Sewer Valve

Cast iron body-stainless steel trim. Threaded female x female connections. NITRILE (Buna-N) seat. Large orifice equals inlet size. Eliminates vacuum in waste water pipeline.Temp Max: 150° F (65 C)Inlet Pressure Max: 300 PSI. Size(s): 1 to 6 in.

By Flomatic Corporation based in Glens Falls,, NEW YORK (USA). from Air Release Valves (Sewage) Product line

SWEET-AIRE - Model ODO - Check Bag Valve

The SWEET-AIRE ODO-CHECK bag valve is designed to prevent the backflow of sewer gas into lateral sanitary sewage distribution lines. The prevention of the backflow of the sewage vapors eliminates the malodorous compounds from the main sewer from being forced back up the lateral line and ultimately discharged into the residence or industrial ...

By Sierra Environmental Technologies based in Pacific, MISSOURI (USA). from Accessories Product line

SEWAIR - Model DUAL - Combination Sewer Valve

Cast iron body, stainless steel trim. NITRILE (Buna-N) seat. Provides protection of both small and large orifices. Two body construction. Temp Max: 150° F (65 C)Inlet Pressure Max: 150 PSI. Size(s): 1 to 2 in. (25 to 50 mm)

By Flomatic Corporation based in Glens Falls,, NEW YORK (USA). from Air Release Valves (Sewage) Product line

SEWAIR - Model COMBO - Universal Sewer Air Vacuum Release

Cast iron body, stainless steel trim. NITRILE (Buna-N) seat. Provides same protection as Sewair- Dual®, but combines into one body. Temp Max: 150° F (65 C). Pressure Max: 150 / 175 PSI (depending on Orifice size). Size(s): 1 to 3 in. (25 to 80 mm)

By Flomatic Corporation based in Glens Falls,, NEW YORK (USA). from Air Release Valves (Sewage) Product line

SOLIDO - Compressed Air Units

The innovation in treatment technology: The compressed air powered SBR small sewage treatment unit with technology capsule.

By Rewatec GmbH based in Hamburg, GERMANY. from Small Sewage Plants - Sewage Treatment Units Product line

Vent-O-Mat - Model RGX - Air Release Valve

The original “Anti-Shock” & “Anti-Surge” air release and vacuum break valves for water, sewage, and effluent pipelines.

By RF Valves, Inc based in Hanover, MARYLAND (USA). from Sewage & Slurry Air Release Valves Product line

Techsorb – Odor Control Unit

Purpose: The TECHNSORB series has been designed for the purification of up to 4000m³/hr H2S laden air stream using single carbon bed. A feature is that the carbon can be regenerated at site. Air is blown into the bottom of the carbon bed and flows upward through the carbon bed.The air discharges to atmosphere via the top outlet nozzles. As ...

By Tech Universal (UK) Ltd based in Cardiff, UNITED KINGDOM. from Domestic Sewage Product line

Tuke & Bell - Electromatic Ejector

The Tuke & Bell Electromatic Ejector is an air powered sewage pump, suitable for efficiently pumping crude sewage to a rising main. The ejector body is constructed from cast iron for exceptionally long life; all connecting pipe work is in ductile iron. Tuke & Bell proprietary heavy duty non-return valves are utilised to accommodate the ...

By Tuke & Bell Ltd based in Wednesbury, UNITED KINGDOM. from Sewage Ejectors Product line

Unit Lift & Force Ejector

The Tuke and Bell 'Unit Lift and Force' ejector, is one of the company's most successful products. Well over 3,000 have been supplied throughout the world. This system is ideal where a relatively small volume of crude sewage is required to be pumped. Conscious of the increasing necessity for economy in installations of this kind, Tuke and Bell ...

By Tuke & Bell Ltd based in Wednesbury, UNITED KINGDOM. from Sewage Ejectors Product line

UNIPUMP - Model V - Sewage Pumps

The compact unit consisting of the close coupled sewage pump and the UNIPUMP-V vacuum pump is suitable for both vacuum creation and also for transporting the sewage in the pipelines. The motor is underpinned to the vacuum pump and is the heart of the unit. Its central position saves an enormous amount of space, so the UNIPUMP-V pumps can be ...

By Herborner Pumpenfabrik based in Herborn, GERMANY. from Sewage Pumps Product line

Balmoral - Model CAP6 - Continuous Aeration Plant

To complement Balmoral Tanks' range of high-end sewage treatment products, the company manufactures fit-for-purpose, cost effective. Continuous Aeration Plant (CAP). The Balmoral Sequential Batch Reactor (SBR) has proven, beyond doubt, to provide the highest standards of effluent quality in the market-place. The Balmoral CAP, while not designed to ...

By Highspeed Group Ltd based in Keighley, UNITED KINGDOM. from Sewage Plant Product line

redFox - Land Drilling Rig Sewage Treatment Unit / Camp Sewage Treatment Unit

We provide complete treatment packages for all of the wastewater to ensure your site complies with local, regional, country discharge regulations. Our standard units can be adapted for high or low temperature locations.

By redFox Environmental Services Inc. based in Youngsville, LOUISIANA (USA). from Sewage Units Product line

Tuke & Bell - Directomatic Ejector

Where existing building services consists of compressed air, it is possible to eliminate the compressor set and air receiver entirely, thus greatly reducing installation costs. The process is the same as with the Electromatic Ejector but with modified controls. The operation of the Electromatic and Directomatic Ejector is controlled by a ...

By Tuke & Bell Ltd based in Wednesbury, UNITED KINGDOM. from Sewage Ejectors Product line

Subscribe to our eBulletins

Add Supplier Profile