grease separator Articles
-
Removal of Tramp Oil with an Oil Skimmer from Cooling Water in a Steel Mill - Case Study
Acchieving Process Optimisation and Cost Reduction The Problem The cooling water system at a steel rolling mill is heavily contaminated with tramp oil due to various oil leaks. Small amounts of oil and very viscous grease come from the lubrication of the roll bearings. Hydraulic systems leak small but continual amounts of hydraulic oil into the cooling water system. Burst hoses or damaged piping ...
By Friess GmbH
-
Importance of Routine Maintenance for Oil and Water Separator Systems
Pharmaceutical, natural gas processors, other processing plants, usually generate wastewater that contains harmful contaminants. An oil and water separator works by removing grease suspended in the affluent. There are many factors to considered when learning the importance of routine maintenance for oil and water separator systems. The oil and water separator uses the principle of gravity to ...
-
Case study - oil removal from oil water separator
Customer: Food Processor; forming and precooking prepared food items for the fast food industry. Plant located in Upstate New York. The Problem: Customer operates three shifts of production. The third shift is responsible for washing and sanitizing all food process equipment and surrounding areas. Oil and grease from sausage and hamburger cookers, and drippings on the plant floor from ...
-
Solving waste oil management and removal problems in power generating plants
If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you