Sludge Disintegration Articles

  • Use of anaerobic hydrolysis pretreatment to enhance ultrasonic disintegration of excess sludge

    To improve the excess sludge disintegration efficiency, reduce the sludge disintegration cost, and increase sludge biodegradability, a combined pretreatment of anaerobic hydrolysis (AH) and ultrasonic treatment (UT) was proposed for excess sludge. Results showed that AH had an advantage in dissolving flocs, modifying sludge characteristics, and reducing the difficulty of sludge disintegration, ...


    By IWA Publishing

  • High dry solids digestion

    Abstract Digestion of sewage sludge normally takes place at pH values between 7,0 and 7,5. Control methods of the process stability are based on practical experience such as the ratio of volatile fatty acids (VFA) and total alkalinity (TA). Thermal sludge disintegration for an enhanced digestion process allows a digester feed with higher dry solids concentrations. This is due to an ...


    By Cambi Group AS

  • Ultrasonic sludge disintegration in the presence of iron (II) as catalyst

    Increasing environmental awareness worldwide and subsequent regulations have led to the application of improved and novel technologies in excess sludge treatment. Sludge is the by–product of wastewater treatment plants rich in organic carbons, pathogens and metals. To enhance the ultrasonic sludge disintegration, a new method by introducing (Fe (II)) as a catalyst in the process has been ...


    By Inderscience Publishers

  • Ultrasonic Waste and Sludge Treatment

    Biogas is generated from sources, such as municipal organic waste, sewage sludge, muck or manure. Ultrasonication improves the digestibility of such organic material leading to more biogas and less residual sludge. Biogas is a byproduct of the decomposition of organic matter by anaerobic or aerobic bacteria. It consists primarily of methane, carbon dioxide and hydrogen sulfide. This makes biogas ...


    By Hielscher Ultrasonics GmbH

  • High dry solids digestion

    ABSTRACTDigestion of sewage sludge normally takes place at pH values between 7,0 and 7,5. Control methods of the process stability are based on practical experience such as the ratio of volatile fatty acids (VFA) and total alkalinity (TA). Thermal sludge disintegration for an enhanced digestion process allows a digester feed with higher dry solids concentrations. This is due to an opening of ...


    By Cambi Group AS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you