Sludge Disposal Equipment For Water And Wastewater Available In Jamaica
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Requires operator action for motorised opening and closing of plates. Maximum filtering surface: 1.5m² at 64.3m². Maximum number of plates: from 5 to 60. Plate size: from 470mm to ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Complete automatic sludge dewatering cycle. Only suitable for mineral sludge. Capacity: Maximum filtering surface: 215 m² to 310 m². No. of plates: 125. Plate size: 1000 or 1200 ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
The sludge filter pack opening and closing system is operated mechanically by means of a lever. Cake discharge by means of a scraper. Capacity: Maximum filtering surface: 1.5m² to 64.3m². Maximum number of plates: 5 to 60. Plate size: 470mm to ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The centrifuge for dewatering sewage sludge. The transportation and disposal of the sewage sludge accounts for a large proportion sewage treatment plant costs. The lower the sludge volume, the lower the cost of transportation and disposal. High-performance in sludge dewatering is the decisive criterion. With a Flottweg HTS Decanter® the highest possible dry solids content is achieved in ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
GWT specialized electrocoagulation water treatment systems have several advantages versus conventional chemical coagulation for drinking water applications. One of the foremost problems faced by the present world is accessibility to clean & safe drinking water. According to the World Health Organization (WHO), nearly 1.1 billion people do not have access to a clean drinking water source. With ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Complete automaton sludge dewatering cycle. It has an automatic cake shaking system. Maximum filtering surface 1.5m² to 132.3m². Number of plates: 5 to 35. Plate size: from 470mm to ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Complete automation sludge dewatering cycle. Only suitable for mineral sludge. Maximum filtering surface: 1.5m² at 132.3m². Maximum filtering surface: 92 m² at 129 m². Plate size: 1200 ...
-
Manufactured by Lehmann-UMT GmbHbased in GERMANY
The magnetic conveyor is used for transporting short, broken chips out of machine tools and similar plants, in particular when wear-resistant materials are used and if ferromagnetic substances have to be transported. Use as a combined conveying and filter system is also sensible, for example to achieve coolant/dirt separation at an early stage. Optionally, there is provision for integrating a ...
-
Manufactured by Kontek Process Water Managementbased in CANADA
Evaporate up to two-thirds of your disposal costs with the original under-the-press sludge dryer. ConRec continues to be a leading sludge dryer brand for one reason: consistent results that yield higher profits. Built to last with corrosion-resistant materials, you can depend on your ConRec sludge dryer to perform for many years to come. Sludge is a permanent liability that burdens even the ...
-
Manufactured by Dewlink Sludge Treatment Ltdbased in UNITED KINGDOM
The latest innovation on the many variation of screw press dewatering system, with an increase in ...
-
Manufactured by Boydel Wastewater Technologies Inc. - Electrocoagulationbased in CANADA
Heavy-duty platform for heavily loaded TSS feedwaters with up to ~3% solids. Applies dual zone electro-chemical treatment; first of electro-coagulation and then a second insitu strong electro-oxidation treatment. We observe that our dual process breaks bacterial cellular walls allowing further insitu trapped water to be released. In comparative feed water testing, where centrifuges are providing ...
-
Manufactured by Neo Performance Materialsbased in CANADA
The answer is yes! Neo Water Treatment is only changing the name, not the formulas what have given wastewater utilities the ability to control their phosphorus and reach the low effluent concentrations required by their NPDES permits. Neo WaterFX300 is the same lanthanide-based treatment as RE300, and provides all the added benefits that RE300 is known for, ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The Hydroflux GT is a unique product that will remove grease, oils and solids from commercial kitchen wastewater to allow discharge of the wastewater to sewer. It offers a lower footprint than traditional DAF systems and utilises almost half the ...
-
Manufactured by AWAS International GmbHbased in GERMANY
The band filter works either as a freestanding system to separate particles from the water flow, or in addition to a complete treatment plant for sludge dewatering. Automatically operated gravity band filter with automatic take in and transport of filter ...
-
Manufactured by Malmberg Gruppen ABbased in SWEDEN
The Malmberg circular sludge scraper is designed for wastewater treatment plants that place high demands on the final quality of the treated wastewater. The flexible design of the scraper makes it easy to adapt to different basin volumes. We prefabricate the main components of the scraper in our Malmberg engineering workshop to enable easy installation on ...
-
Manufactured by Hangzhou Juntai Plastic Products Co., Ltd.based in CHINA
A Dewater Screw Press is a machine that is used to separate liquids and solids from a slurry or other material. It is commonly used in wastewater treatment plants, food processing facilities, and other industries where there is a need to separate liquids from solids. The dewatering process typically involves feeding the slurry into the machine, where a rotating screw auger is used to compress and ...
-
Manufactured by Transcend Cleantec Pvt. Ltd.based in INDIA
Sludge dewatering Press is not intended to treat the sludge or liquid but; it only separates the liquid components & solid components so it will get easier & cost effective to handle the separate phases of the disposal. Once the final sludge has been dewatered, then liquid is treated in ETP/STP & solid sludge is disposed. The main purpose of Sludge dewatering machine is to minimize the handling ...
-
Manufactured by ELIQUO WATER GROUP GmbHbased in GERMANY
Disposing of sewage sludge is expensive. In addition to the energy costs, it generates the largest portion of operating costs. As a result, the goal must be to reduce the amount of sludge to the greatest extend possible. In addition sludge represents a major energy resource. Digestion alone only makes use of this potential to a certain extent. A PYREG plant mineralises even wet biomass like ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you