Sludge Drying Applications available in Canada
-
Premium
Moisture measurement in bulk solid processes and food manufacturing industry
All foodstuff and bulk solids contain water. Moisture defines quality, the capability to store it and with the weight also the price of products. Legal requirements put the frame. With material moisture measurement you determine the content of water in your food products and bulk solids exactly if you use latest technology. Since more than 20 years IMKO sets standards with TRIME and SONO TDR technology based on radar, especially in applications where capacitive sensors and microwave technologies came to their ...
By IMKO Micromodultechnik GmbH based in Ettlingen, GERMANY.
-
Premium
Hot Sludge Flow Measurement solutions for Wastewater Treatment Plant - Sludge Treatment
Continuous measurement of sludge coming from a digestion tower and being pumped through a heat exchanger. Required to detect possible blockage or reduced pump performance and to ensure permanent heat supply for the WWTP social ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Separation Layer Measurement in Primary Clarifier solutions for Wastewater Treatment Plant - Preclarification
Application: Rectangular basin 30 m x 8.5 m with two outlet funnels. Basin depth 2.8 m. Funnel depth 5.8 ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Applied Range
The low Temperature Sludge Dryer made by Shincci can directly reduce the moisture of sludge from 83% to 10%-30% as per specific requirement, with volume reduction by 67%, weight reduction by 80% and sterilization by 90%. It is energy-efficient and ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Water and Wastewater Equipment for Water & Wastewater Treatment
For over 30 years, Water and Wastewater Equipment Company has been providing efficient, cost-effective and compliant solutions to water and wastewater treatment applications, all the way from small batch systems to continuous-flow systems treating 500,000 gallons per day. Our technical analysts and designers are experienced in every phase of wastewater treatment – from fabrication, installation and laboratory testing – to systems ...
By Water & Wastewater Equipment Company (WWE) based in Cleveland, OHIO (USA).
-
Industrial Air Pollution Control for the Recycling and Waste Management
Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction. ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Process equipment and technology solutions for wastewater & recycling industry
Our plants make it possible to conserve resources through treatment and recovery. For the treatment of waste water, among other things, thin-film dryers are used. You can concentrate, dry and drain pastes and sludge. Due to the good product circulation in the dryer, sludge can be dried perfectly. Process water often has to be aftertreated in order to either dispose of it properly or to recycle it back into the process cycle. This is usually achieved through process combinations. Thermal processes are the focus of ...
By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.
-
Evaporating and drying equipments for textile sludge applications
The main process units include: industrial park sewage treatment, pending sludge drying reduction, dry sludge Utilization of blending by thermal power plant, industrial park production heat supply, dryer heat source recycle and reuse as well as other process, which formed an industrial chain that has the characteristics of circular economy and can be replicated and promoted, known as Sludge Treatment Demonstration Base in FOSHAN city. This project was rated as "Excellent Case of Chinese Sludge Treatment and ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Waste Treatment for Sludge
Town development provokes an increase in the number of used-water treatment sites. In turn, these factories generate silt which must be treated. Therefore, MENART develops and equips silt treatment purification stations with: Corridor turners for silt drying. Sludges mixers with green waste coupled to a sieve. Green waste shredders. Jigger-mixers. Once treated, these sludges can be spread to enhance ...
By Menart based in Dour, BELGIUM.
-
Evaporating and drying equipments for chemical sludge applications
Chemical Sludge Property Description: 1. Sludge dewatering method:plate and frame filter press; 2. Moisture before drying:60.53%; 3. Color of wet sludge:dark red; 4. Smell description:no odor; 5. Shape: cake, rock 6. Hand feel: soft. Need to smash before ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Evaporating and drying equipments for leather sludge applications
Overview of leather sludge: There are two types of leather sludge, one is sludge such as leather shavings and minced meat, which can be handed over to the gelatin factory for disposal and must not enter the food chain. The other is the sludge obtained after treatment of tannery wastewater. Biochemical sludge with low chromium content and high-concentration chromium sludge obtained by alkaline ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Evaporating and drying equipments for electroplating sludge applications
Electroplating sludge mainly comes from the solid waste generated by various electroplating waste liquids and electrolytic bath liquids of industrial electroplating plants after liquid phase chemical treatment. Due to the different production processes and treatment processes of electroplating manufacturers, the chemical composition of electroplating sludge is quite complex, mainly containing chromium, iron, nickel, copper, zinc and other heavy metal compounds and soluble ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Sludge drying solutions for municipal applications
The sludge obtained from the treatment of tannery wastewater, whether it is a biochemical sludge with low chromium content, or a high-concentration chromium sludge obtained by alkali precipitation, can be dried and reduced to help you treat leather sludge in the most economical and environmentally friendly way. electroplating sludge is quite complex, mainly containing chromium, iron, nickel, copper, zinc and other heavy metal compounds and soluble ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Evaporating and drying equipments for electroplating sludge applications
Electroplating sludge mainly comes from the solid waste generated by various electroplating waste liquids and electrolytic bath liquids of industrial electroplating plants after liquid phase chemical treatment. Due to the different production processes and treatment processes of electroplating manufacturers, the chemical composition of electroplating sludge is quite complex, mainly containing chromium, iron, nickel, copper, zinc and other heavy metal compounds and soluble ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
High-quality oil-free blowers and screw compressors solutions for water and waste water treatment industry
There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating drinking ...
By Aerzen International Rental B.V. based in RR Duiven, NETHERLANDS.
-
Torbed process reactor technologies solutions for sludge processing sector
Drying: With most sludges, a significant percentage of weight is water, anything up to 60%. We have developed an application of our reactor to the drying of slurries, sludges and biomass solids to produce a higher calorific value ‘fuel’. The paper sludge drier shown dries up to 5 t/h of 55% water paper sludge from a primary paper mill in Holland (the balance of the feed is 50% mineral and 50% wood fibre). The sludge is flocculated, granulated and fed directly to this three stage drier off a conveyor ...
By Torftech Group based in Thatcham, UNITED KINGDOM.
-
Odour Control Systems for Waste Water – Sewage Industry
ERG is a leading supplier of Odour Control Systems to the Water Industry. ...
By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.
-
Sludge & Wastewater Treatment Equipment for Sludge Solutions
This is a completed solution developed by Tongji University and used for advanced sludge dewatering , the core equipment of which is the super-high pressure filter press. ...
By Shanghai Techase Environment Protection Co., Ltd based in , CHINA.
-
Vacuum/Pressure machines for Industrial cleaning industry
Amphitec products are very suitable for industrial applications, for both the petrochemical and the food industry. The Amphitec concept makes it possible to suck up liquids and solids, wet and dry, thick sludge and powders. The components and materials that come into contact with the product that is sucked up are made of stainless steel as a standard and therefore resistant to the highest acidity levels. Combined with ATEX and ADR certifications, this makes Amphitec machines the most efficient, versatile and safe ...
By Amphitec B.V. based in Hendrik Ido Ambacht, NETHERLANDS.
-
Industrial air system solutions for pulp & paper sector
Allied supplies systems and equipment for various applications: Dust control systems for wood rooms. Air density separators for chip cleaning. High pressure conveying system for chips and wood waste (bark and sludge). Trim handling systems, including ducting, cyclones and baghouses. Sludge drying systems with rotary dryers. Ducting and fans for energy systems. Scrubbers, WESP and RTO for air pollution control. Mill ventilation, heating, cooling make up air ...
By Allied Blower & Sheet Metal Ltd. based in Surrey, BRITISH COLUMBIA (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you