Sludge Drying Equipment available in Brazil

Available in Brazil| Near Brazil
57 Results found

We couldn't find any results in Brazil

Here is a list of results available in Brazil

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Sludge Drying ×

  • Available in: Latin America ×

  • Available in: Brazil ×

SmartDry - Belt Dryer

by Thermo-System Industrie- & Trocknungstechnik GmbH     based in Filderstadt - Bernhausen, GERMANY

TheSmartDry™ belt dryerutilizes the available waste heat efficiently for the drying of sewage sludge. The sewage sludge is fed into theSmart Dry™ belt dryerby a matrix-free feeding. The patent pending feeding system is 100 % secure of plugging and allows the loading/feeding of sludge with dry solids content range between 15 to 70 %. ...

WATROMAT - Standard Sludge Dryer

by Watropur AG     based in Unterseen-Interlaken, SWITZERLAND

WATROMAT batch sludge dryer use dried air to reduce the weight and volume of filter cake sludge. Sludge drying with WATROMAT batch sludge dryers is ideal for filter cake sludge from small and medium plate and frame filter presses. The filter cake sludge is filled into WATROMAT drying containers and will be dried with dry air. All WATROMAT drying ...

WATROMAT - Container Sludge Dryer

by Watropur AG     based in Unterseen-Interlaken, SWITZERLAND

WATROMAT container sludge dryer reduces the volume and weight of filter cake sludge semi-continuously with dried air in big skips or hook lift containers. Sludge drying with WATROMAT container sludge dryer suits for large plate and frame filter presses. The filter cake sludge fall into WATROMAT drying skips or WATROMAT hook lift drying containers ...

THERMO-SYSTEM - Active Solar Sludge Dryer

by Entech Environmental and Industrial Equipment     based in Laguna Niguel, CALIFORNIA (USA)

Parkson’s THERMO-SYSTEMuses the sun as its main power source to generate 95% of the energy required for drying sludge.  The result is significantly reduced operating costs compared to competing technologies like conventional gas or oil fired dryers. The system’s sustainable, drying process is fully automated and is designed with ...

THERMO-SYSTEM - Active Solar Sludge Dryer

by Parkson Corporation     based in Fort Lauderdale, FLORIDA (USA)

Parkson’s THERMO-SYSTEMuses the sun as its main power source to generate 95% of the energy required for drying sludge.  The result is significantly reduced operating costs compared to competing technologies like conventional gas or oil fired dryers. The system’s sustainable, drying process is fully automated and is designed with ...

StorageDryer - Sewage Sludge Drying Small Plants

by Thermo-System Industrie- & Trocknungstechnik GmbH     based in Filderstadt - Bernhausen, GERMANY

The StorageDryer™ combines the fully automatic drying and the storage of sludge in one plant. The fully automatic, year-round loading and the necessity to unload the plant only once a year offer maximum operating reliability for minimum work effort.  The StorageDryer™ - a clever solution for plants between 1 000 and 30 000 ...

Sludge Treatment for Cement Factories

by ANDRITZ Separation - a division of the Andritz Group     based in Graz, AUSTRIA

Incineration of sewage sludge in cement factories is becoming a more and more interesting issue worldwide. Besides that municipalities can solve the disposal problem of dewatered or dried sewage sludge, cement factories offer a perfect match for the treatment necessities of sewage sludge. The dried sludge can be used as fuel and, depending on its ...

WATROMAT - Belt Sludge Dryer

by Watropur AG     based in Unterseen-Interlaken, SWITZERLAND

WATROMAT belt sludge dryer uses a drying tunnel and conditioned dried air to reduce sewage sludge storage volume and weight. WATROMAT belt sludge dryer is suited for sewage sludge dewatered by belt filter press, centrifuge, decanter or screw press. Sewage sludge will be distributed on a perforated belt, transported slowly through a sludge tunnel, ...

Odor Neutralizing Mist System

by Piian Systems     based in Palm Springs, CALIFORNIA (USA)

Our most durable odor control mist system. For permanent installation along property boundaries of landfills, compost sites, sludge drying beds, soil remediation sites, around lagoons and ponds etc. This system is connected to a water supply. A high pressure pump adds Piian Odor Neutralizer to the water supply and pressurizes the fluid mixture to ...

ELECTRIC-SCRU - Electrically Heated Indirect Screw Processor

by Therma-Flite Inc.     based in Benicia, CALIFORNIA (USA)

The “Electric-Scru” Processor is a continuous heater/dryer specifically designed for low thermal desorption applications. Similar to the “Holo-Scru” Processor, the “Electric-Scru” Processor has the same basic function except that it uses electricity as the heating source, rather than hot oil or steam. The ...

Secon - Thermal Sludge Dryer

by Energy & Waste S.l     based in Terrassa-Barcelona, SPAIN

The technics based on gradient pressure is the operation with more applications and development among the numerous membrane technologies for application in wastewater treatments that are currently in the market. These methods of separation have been divided into three main groups: microfiltration, ultrafiltration and reverse osmosis. Lately a new ...

SludgeManager - Solar-Thermal Drying Plants

by Thermo-System Industrie- & Trocknungstechnik GmbH     based in Filderstadt - Bernhausen, GERMANY

The SludgeManager combines the good points of the proven Electric Mole™, such as robustness, ease of maintenance and stainless-steel construction, with the advantages of fully automated operation. It has been developed jointly by Thermo-System, the ACAT company and the University of Hohenheim. In contrast to the drying process with the ...

INNODRY 2E - Sludge Drying

by Degremont Technologies - a subsidiary of Suez Environnement     based in Dübendorf, SWITZERLAND

INNODRY is an innovative sludge drying process, proven and ideal for 20'000 - 300'000 PE. The system allows you to treat biosolids with sustainable development criteria. These are energy saving and comfort for the community and the environment.

Electric Mole - Solar Drying Sewage Sludge Plants

by Thermo-System Industrie- & Trocknungstechnik GmbH     based in Filderstadt - Bernhausen, GERMANY

Drying with theElectric Moleis a batch or semi-continuous process that always ensures optimal drying performance, independent of sludge characteristics, weather conditions and energy input.

Partial Sludge Drying

by ANDRITZ Separation - a division of the Andritz Group     based in Graz, AUSTRIA

Many wastewater treatment plants are coping with a waste stream of digested sludge. The sludge is normally dewatered by means of a centrifuge or belt filter press. After dewatering the sludge has a typical dry solids content of approx. 20 - 25%, which is very suitable for thermal treatment in a ANDRITZ paddle dryer.

BIO-SCRU - Model IC Series - Biosolids Dryer System

by Therma-Flite Inc.     based in Benicia, CALIFORNIA (USA)

As the challenges of disposing of Class B biosolids become more daunting, forward-thinking treatment plants are searching for cost effective solutions that will help their communities become EPA-compliant. For many reasons the disposal of Class B has become a problem. Transportation cost and tipping fees are soaring, in some instances landfills ...

Sludge Dryers - Drying

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro supplies biogas-fired and electrical sludge drying equipment in conjunction with its anaerobic digestion systems. Dryers further reduce the volume of sludges before transport and disposal and form a possible next step after the volume reduction and energy recovery delivered by the anaerobic digestion process.

High Temperature Processes System

by Torkapparater AB     based in Stockholm, SWEDEN

Torkapparater has experience from many high temperature processes. We started to supply lime and calcining kilns already in the 1950's and have developed rotary kilns for pyrolysis of e.g. sludge. Today Torkapparater also supplies kilns with indirect heat transmission. The kilns treat the material without presence of ambient air which enables ...

Komline-Sanderson - Biosolids Dryer System for Biosolids and Biological Sludge Drying

by Komline-Sanderson     based in Peapack, NEW JERSEY (USA)

The Komline-Sanderson Biosolids Drying System uses indirect drying technology to convert municipal and industrial biological sludge into a sterile, free flowing granular product. The dried biosolids can be beneficially reused as a slow release nitrogen fertilizer, soil amendment additive or as a green fuel in a boiler and cement kiln. The K-S ...

BIO-SCRU - Biosolids Drying System

by KMT International, Inc.     based in Fremont, CALIFORNIA (USA)

Choosing the right drying system for your treatment plant is essential to maximizing cost efficiencies and reducing environmental impact. The BIO-SCRU dryer system eliminates pathogens and reduces moisture content to 90% and volume to typically 20% or less. The BIO-SCRU® is a simple, easy to maintain dryer system, with a small footprint. The ...

Need help finding the right suppliers?

Let the XPRTs do the work for you