Only show results in Massachusetts? Ok

Sludge Management Applications

  • Premium

    Technologies for Wastewater Treatment in Meat Processing Industry

    The main problems of wastewater treatment in poultry slaughterhouses are high energy consumption, high maintenance costs and complex treatment of highly contaminated wastewater. The objectives of wastewater treatment in slaughterhouses are to respect the legal limits, produce the minimum possible quantity of sludge and to recover the maximum possible quantity of energy. Fluence employs the following main technologies to design Waste & Wastewater treatment plants: DAF Dissolved Air Flotation: For the initial...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Water & wastewater treatment solutions for industrial

    Fluence has decades of experience delivering cost-effective and sustainable treatment solutions for a wide range of industries.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Technologies for Wastewater Treatment in Dairy Industry

    Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Oil Spill Eater II (OSE) for energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Technologies for Wastewater Treatment in Breweries

    The "ideal" treatment of waste from beer (and not only) must respect the legal limits, produce the minimum possible quantity of sludge and recover the maximum possible amount of energy. Fluence offers an anaerobic solution on wastewater and sludge + aerobic wastewater treatment. The anaerobic solution uses a "Rapid" granular sludge digester. It is a digester in which a particular type of sludge capable of "granulating" grows and it is used for very low COD (> 2000 ֺmg / l) as long as the waste contains sugars or...

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Sludge dewatering for sludge management

    This innovative sludge dewatering product offers many advantages over conventional sludge management methods.

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA).

  • Premium

    Liquid/solid separation equipment for refinery, chemical and petrochemical

    Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal cracking.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Liquid/solid separation equipment for steel and manufacturing

    Coke Wastewater Treatment: Heating coal over 1100 Co in the absence of oxygen produces metallurgical coke. This process provides both heat and carbon (coke) required for iron production. During this process the volatile materials contained in the coal are driven off, leaving coke as the product. Gas produced by coking is withdrawn by means of blowers to recover energy-rich byproducts, including methane. Ammonia stills are the principal means of recovery. Recycled scrubber water is used as a coolant. Scrubber...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Liquid/solid separation equipment for paste thickening and backfill

    Mine backfill is defined as the material used to fill the cavities (i.e., stopes) created by underground mining. Backfilling can be a means to dispose of sludge and/or tailings which may contain hazardous materials and to reduce surface environmental impacts by storing tailings underground. Alternately, backfilling with nonhazardous materials can allow for mining productivity improvements. To these materials are added a variety of fillers such as fly ash, course sand, or gravels along with a binder, such as...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Chemical Water Treatment for waste water

    Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Shredders and crushers for screenings

    The screenings cause considerable problems during disposal. In its untreated state, it is very moist and still contains a considerable proportion of easily degradable organic matter, which can lead to unpleasant odours due to spontaneous decomposition processes. In a sewage treatment plant, pieces of wood, plastic foils and other heavy materials are fed in via the waste water inlet. These are collected with the screenings in front of the screens and are then removed from the waste water stream during the screen...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Municipal

    Wastewater Technology Innovation Since 1961. Hydroflux Epco is a water and wastewater business with over 1000 references dating back to 1961. It provides municipal clients and contractors a diverse range of solid liquid separation and biological treatment processes.

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA.

  • Premium

    Industrial solutions for heavy metals removal

    Heavy Metals Wastewater Treatment System (Chrome Removal): Chromium is present in the wastewaters of a number of industries, including: stainless steel manufacturing, protective coatings on metal, magnetic tapes, chrome plating, tanneries, textile dyes production, pigments and paint production, production of cement, paper, rubber, etc. Chromium is typically precipitated in two steps: reduction and precipitation.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Gas monitoring instruments and systems for nickel refining

    The mining industry uses chemicals as ‘flotation’ agents in the recovery of sulphide minerals containing metallic elements (e.g., copper, nickel, silver, gold) from ore slurries. Sodium ethyl xanthate (SEX) is one of most common flotation agents, and it decomposes to form ethanol, carbon disulfide CS2, and Carbonyl Sulfide COS. These harmful gaseous compounds must be monitored from the indoor air at the enriching plant.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Liquid/solid separation equipment for coal mining and preparation

    Coal Preparation Circuit: Three quarters of American coal is mined east of the Mississippi River. Half of this is “prepared” coal. Coal preparation offers a number of commercial and environmental benefits. These include increased quality and commercial value of saleable coal by achieving 75-80% ash reduction and 15-80% trace element reduction. Cleaned coal reduces transportation costs as well as reduced quantities of combustion ash requiring disposal. Coal preparation can also make marginal coal...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Aeration and mixing technologies for mining wastewater treatment

    Optimize Mine Production. We understand that you are facing increased regulations and mining operations continuously deal with challenges presented by harsh and dangerous conditions. Wastewater treatment to meet regulatory and social demands only compounds those challenges. Aeration Industries International can limit the time and effort you spend on wastewater treatment, allowing you to focus on what matters most… production.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Sludge reduction for industrial wastewater treatment

    The wide range of Pieralisi decanters is in fact successfully used by over 15,000 customers around the world for the volume reduction of biological and physical/chemical sludge of both Municipal and Industrial origin.

    By Pieralisi Group based in Jesi, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you