Municipal Wastewater Industry (Sludge Management) Equipment
-
Manufactured by Interplan d.o.o.based in CROATIA
BIOLAGUNA is the most modern method of treatment of municipal and industrial waste water, especially water supply lines and with varying concentrations. They have the advantage of all the parameters by which they evaluate the efficiency of wastewater treatment water: low cost of construction, the highest level of treatment and the lowest ...
-
Distributed by Ekotakas UABbased in LITHUANIA
Septage receiving stations are used to collect municipal and industrial wastewater from sewer sanctions machines. Capacity up to 137m3/h. Automatic process control. Ultrasonic sensors protects from ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
Multidisc sludge dewatering screw press is integrated with sludge flocculation tank which efficiently mixes the input sludge with the optimal dose of flocculation. This flocculated sludge then enters the screw body which in the initial stage has more open area to dewater the separated water faster.As screw rotates at a rpm which is set to give optimum output carries the dewatered concentrated ...
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
The proposed Containerized Sludge Dewatering Plants by DEVISE present a complete solution for the management (thickening & dewatering) of primary and biological sludge produced during municipal or industrial wastewater treatment. All the necessary systems & equipment for the dewatering plant, excluding the sludge collection ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
PULSION MBR modules offer up to 40% aeration energy reduction and 25% footprint reduction. Leveraging the key differentiating features of PURON MBR, this innovation pulses a large bubble through a chambered fiber bundle, creating a piston-like pumping action that results in lower air and aeration energy requirements than traditional scouring methods. Improved recirculation of mixed liquor in the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
This patented module features reinforced PVDF hollow fibers that are fixed only at the bottom, virtually eliminating the clogging buildup of hair, fibrous materials and sludge solids. Solids and particulates, including bacteria, remain on the outside, while permeate is drawn through the membrane to the inside of the fibers. The aeration nozzle is centered in the fiber bundle to scour the entire ...
-
Manufactured by Dongying Nuoer Chemical CO.,LTDbased in CHINA
The NUOERFLOC range of polymers and flocculants are widely used in the treatment of wastewater from both municipal and industrial wastewater treatment plants.Municipal Wastewater Treatment Our products is used in all solid-liquid settlement, separation and sludge dewatering processes (centrifuge, belt press)in ...
-
Manufactured by OR-TEC, Incorporatedbased in USA
A Double or Triple Belt Press for municipal and industrial wastewater plants. The OR-TEC xpress Belt Press System is the perfect double or triple belt press for the municipal and industrial wastewater treatment plants. It is designed to be easy to install, operate and ...
-
Manufactured by Vulcan Industriesbased in USA
The Model TF Shaftless Screw Conveyor is utilized for the transport of screenings, grit or sludge in municipal and industrial wastewater treatment ...
-
Manufactured by Jensprima Instruments Limitedbased in UNITED KINGDOM
The innoCon 6800 Optical Controller is designed for municipal wastewater and industrial wastewater treatment plants and measures with innoSens series of optical electrodes: dissolved oxygen (fluorescence), MLSS, SS and turbidity. English / Chinese menu, standard 4-20mA / RS485 Modbus and a variety of control functions ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The INVENT iDISC has been developed and optimized for the use in municipal and industrial wastewater treatment plants. It efficiently supplies the mixed liquor in the activated sludge tank with oxygen and is suitable for almost all variations of the activated sludge ...
-
Manufactured by Jäger Umwelt-Technik GmbHbased in GERMANY
Energy-efficient wastewater treatment with textile high-performance fixed bed – for municipal and industrial ...
-
Manufactured by Clean Water Technology, Inc.based in USA
The Membrane Bioreactor is a unique and compact wastewater treatment process that combines a single sludge aerobic biological treatment process with an integrated, immersed membrane system. This process is ideally suited in a wide range of municipal and industrial wastewater treatment applications including water ...
-
Manufactured by Rudolf Messner Umwelttechnik AGbased in GERMANY
MESSNER LiftOut is a lifting frame that was specially designed for use in activated sludge tanks in municipal and industrial wastewater treatment plants and is always used when the tank cannot be emptied. By using the lifting frames, the aeration system can be lifted in and out of filled aeration tanks with the help of a mobile crane ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum ...
-
Manufactured by Napier-Reid Ltd.based in CANADA
Time tested and trusted for the critical application of heating or cooling digester sludge. Napier-Reid has emerged as a leading manufacturer of sludge heat exchangers for municipal and industrial wastewater treatment ...
-
Manufactured by Genex Utility Management Pvt. Ltd.based in INDIA
Membrane bioreactor (MBR)is the combination of a membrane process like microfiltration or ultra-filtration with a biological wastewater treatment process, the activated sludge process. It is now widely used for municipal and industrial wastewater ...
-
Manufactured by De.mem Limitedbased in AUSTRALIA
A Membrane Bioreactor (MBR) is the combination of a membrane process, usually based on Ultrafiltration membranes, with a biological wastewater treatment process, the activated sludge process. MBRs are nowadays widely used for municipal and industrial wastewater ...
-
Manufactured by Parkson Corporationbased in USA
The Biolac® System is a well-accepted biological wastewater treatment process with over 25 years of experience and hundreds of successful installations treating municipal and industrial wastewater. Using an innovative long sludge age, activated sludge process, the Biolac® System provides an extremely simple and cost-effective ...
-
Manufactured by Charter Machine Company (CMC)based in USA
Our ROEFILT Sieve Drum Concentrator (SDC) reduces the volume of thin sludge and slurry produced during municipal or industrial wastewater treatment. The principle of the SDC is very simple: Sludge is flocculated with polymers and the released water is drained by gravity through a filter drum. The sieve Drum concentrator is an efficient ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you