sludge hopper Equipment available in Aruba

Available in Aruba| Near Aruba
59 Results found

We couldn't find any sludge hopper equipment in Aruba

Here is a list of results available in Aruba

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Sludge Management ×

  • Keyword: sludge hopper ×

  • Available in: Latin America ×

  • Available in: Aruba ×


Intereco - Model NT - Belt Conveyor

by Intereco S.n.c.     based in Candiolo (TO), ITALY

The belt conveyor NT is made with 'C' welded plates and with welded structural frame works. Supporting rollers are 'V' rollers perfectly sloped, ends locked by lubrificated and sealed bearings; rollers are 650 mm apart one from each other. Supporting return rollers are horizontal, made like the 'V' rollers and proportional to the belt length. ...

EUROPELEC - Central Drive Thickener

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC CENTRAL DRIVE THICKENER is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

Intereco - Granulator

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Manufactured in carbon steel, either painted of hot dip zinc coated. Available under request completely in aisi 304 s.s. Model gra 150 available with hopper for quick lime, completed by a dosing screw with mecanical speed variator and vibration device against bridges.

Intereco - Automatic Polyelectrolyte Preparation Unit

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Available current models 600 It (two tanks) ( BSB600), 1200 It, 2000 It (three tanks) (BTB 1200 AND BTB 2000) and, under request 3000 It, 4000 It and 5000 It. All models have a simple and reliable functioning. With a bar level controls the polyelectrolite preparation is activated to have always the polyelectrolite tank full. The polyelectrolite ...

Intereco - Model COC 200 - Screw Conveyor

by Intereco S.n.c.     based in Candiolo (TO), ITALY

The screw conveyor COC 200 is made by a steel pipe (hot dip zinc coated or painted) with a 219 mm nominal diameter. The screw has a 200 mm diameter and so is its pitch.The unit is completed by bearings and greasers, feed hopper legs, driving groups with a swinging gear box , pulleys and belts to avoid crawling, safety protections. Under request ...

Toro Equipment - Model TDC Series - Lime Dosing Hopper

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

The Lime Hopper (TDC) is an equipment made of stainless steel that facilitates lime dosing for the conditioning of sludge produced in wastewater treatment.

Intereco - Model CAB 1500 - 2000 - Belt Presses

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Robust side frames in high thickness angles and unp shapes. Completely welded and connected between themselves with bolted unp shaped. Completely high thickness hot dip zinc coating. Fasteners in a2 stainless steel. Metal net protections for easy washing of the belt press. Easily removable for maintenance. Protection over gears in aisi 304 s.s. ...

Intereco - Model Edom 1500 - 2000 - Belt Presses

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Robust side frames in high thickness angles and unp shapes. Completely welded and connected between themselves with bolted unp shaped. Completely high thickness hot dip zinc coating. Fasteners in a2 stainless steel. Metal net protections for easy washing of the belt press. Easily removable for maintenance. Protection over gears in aisi 304 s.s. ...

Toro Equipment - Model TBB Series - Hopper Big Bag

by Toro Equipment S.L.     based in La Cistérniga, SPAIN

The Hopper Big Bag (TBB) manufactured by Toro Equipment is a carbon steel equipment that allows to carry out the lime dosing for the sludge conditioning from waste water treatment.

Live-Bottom Hoppers & Silos

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro designs and manufactures live-bottom hoppers and material silos that store, doze, transport, and/or precisely meter-out a wide variety of sludges and other materials all without operator assistance. Equipped with well-designed counter-rotating shaftless spiral screws at their base, Claro hopper and silo systems avoid arching or bridging even ...

Markland - Automatic Sludge Blanket Level Detector

by Markland Specialty Engineering Ltd.     based in Georgetown, ONTARIO (CANADA)

This Detector helps municipal/industrial water and wastewater plants monitor & control solid/liquid interface levels in clarifiers and settlement tanks (including lamellas, decanting tanks, dissolved air flotation thickeners, sequencing batch reactors, hoppers, upflow filter reactors and sedimentation basins) and automate silt/sludge removal. ...

Model CAD - Dynamic Thickener

by COSME srl     based in Torri Di Quartesolo, ITALY

The dynamic thickner CAD is a rotating drum machinery, which is able to thicken the sludges not thickened, till arriving to a concentration of 10-12%.The sludge, conditioned with chemical reagents (polyelectrolytes), is introduced in the mixer, equipped with variable rotations stirrers. This mixer is positioned outside the thickner and is used to ...

Justice - Model LJ4 Series - Open Hopper Progressive Cavity Pump

by Liberty Process Equipment, Inc.     based in Arlington Heights, ILLINOIS (USA)

The Justice LJ4 Series Open Hopper Progressive Cavity Pump represents an ideal pumping solution for viscous solutions with high solids contents such as high-viscosity chemical transfer of liquids and sludge's in industrial facilities and other low-flowable pumping mediums. Flow rates of 2.02 GPM per 100 Revolutions (5 GPM to 9 GPM) at up to 225 ...

Lime-Stabilized Sludge Treatment Systems

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro designs and manufacturers reliable and cost-effective lime-sludge stabilization systems that deliver EPA Class A- or Class B-certified biosolids. Reduction of pathogens, odors, and the vector attraction potential of municipal and other sludges is achieved through a fully automated shaftless spiral conveyor system that enables thorough lime ...

Chemical Dosing Machine

by Doyen (China) Machinery Co., Ltd     based in Foshan, CHINA

JY serial chemical dosing machine has functions of feeding, dissolving, blending and adding chemicals, it is composed of powder auto-putting machine, stainless steel dissolving box, stainless steel blade stirrer, chemical dosing pump and other accessories including Y type filter, flow meter, electromagnet valve, liquid level controller, etc., This ...

RAPid Transformation of Organic Residues (RAPTOR)

by Global Water Engineering (GWE)     based in Bangkok, THAILAND

A compact 3 step process (enzymatic + thermophilic hydrolysis followed by methanation) transforming food & agricultural residues into biogas.

Model DH-JH - Progressing Cavity Pumps with Hopper

by Nova Rotors srl     based in Sossano VI, ITALY

The pump with hopper with the feeding conveyor is suitable for transfer products with high viscosity and elevated percentage of solids to around 17%.

DEWA - Model BTN L - Heavy Duty Gravity Belt Thickener

by Dewaco Ltd     based in LAITILA, FINLAND

The DEWA BTN L Heavy Duty Gravity Belt Thickener is a total enclosed unit designed to considerably increase the solid content of the sludge. The monocoque design feature enables odour containment within the unit and simplifies odour extraction via the vent pipe mount on the top cover. This revolutionary design concept offers a clean, odour-free ...

ACE - Sludge Screener

by The Haigh Engineering Company Ltd     based in Herefordshire, UNITED KINGDOM

Combined screen and screenings handling system for septic waste, primary sludge and imported sludges. The ACE Sludge Screener consists of a rotary arm with tines that engage in bars equally spaced across the body of the screen. Screened effluent flows from the back of the screen and out of the unit for further processing. Screenings removed by the ...

Mena Water - Chain Sludge Scraper System

by Mena Water     based in Sharjah, UNITED ARAB EMIRATES

The most common chain scraper system scrapes sludge from the bottom and skims surface of the tank. A cross collector can be installed in the sludge hopper for transferring the sludge to the removal system. The rectangular scraper is designed to remove grease and oil and other floating solids from the surface of the wastewater and settlement tanks. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you