Sludge Management Equipment For Water And Wastewater In Canada
-
ShowcaseManufactured by FFP Systems Inc.based in CANADA
Find out more about filter press and slurry dewatering system here at FFP Systems Inc. We are a company in Mississauga, ON that provides an extensive selection of industrial filtering systems. Continue reading through our website to learn more about the filter press feed cycle and its important ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes Medium measurement range for levels up to ca. 1m. Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes. POA flow velocity sensors are suitable for continuous measurement of slight to ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
Inclined Plate Clarifier with coated carbon steel. Hydro Quip’s Inclined Plate Clarifiers are designed and manufactured to provide for the precipitation and separation of suspended solids. Our design employs the use of a series of plates inclined at an angle of 45° or 55°. This specialized design allows the unit to perform all of the functions of a conventional solids contact ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
BIOdek IFAS (Integrated Fixed Film Activated Sludge) offers a possible performance increase of up to 40 % without new aeration tanks. BIOdek IFAS adds high surface media to an activated sludge basin. On this media additional biomass will grow and increase the operative sludge age: A higher performance will be ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
With a fully automated screw pump selection program the optimum screw pump can be choosen for any particular ...
-
PremiumManufactured by ENVEAbased in FRANCE
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas. The operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The continuous flow Inclined Plate Clarifier with Mix & Flocc Tank separates mechanical and chemical emulsions and colloidal contaminants from wastewater as a single flow-through operation. The use of polymers or other chemical additives will help precipitate the contaminants to the hopper compartment for ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For pipe ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
Digital ISE sensor for NH4 and N03, connectable to the IQ SENSOR ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The Flottweg Z8E: The Giant Decanter With the new Z8E decanter centrifuge, Flottweg is extending its product range and setting new standards. Right from the start of development of the Z8E, the target was set of concentrating on the specific requirements of an extremely wide range of industries. The modular design of this decanter centrifuge means it is possible to adjust optimally to all kinds ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hang-in probe with capacitive ceramic measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by Raven Environmental Products, Inc.based in USA
CORETAKER® is the most durable sludge sampler available. We only use clear polycarbonate with ultra violet stabilizers. Polycarbonate has superior clarity for inspecting settled sludge blankets for color and texture. And it comes with a Lifetime Break-Free Guarantee. See Guarantee document in Document Library tab ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement in slight to heavily polluted media. Wedge shape for installation on channel wall or channel ...
-
PremiumManufactured by ENVEAbased in FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
-
PremiumManufactured by Raven Environmental Products, Inc.based in USA
The Raven SID-20200 Sludge Interface Detector, that replaces model SID-10200, is a portable handheld instrument that accurately determines the sludge blanket solid/liquid interface depth in primary tanks, clarifiers, sedimentation basins, lagoons and a wide variety of tanks with settled sludge and ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level ...
-
Manufactured by Watson-Marlow Fluid Technology Groupbased in UNITED KINGDOM
Flows to 108,000 litre/hour, 16 bar. Double pump uptime in tough fluid handling duties. Suction lift to 30 feet, dry running and reversible. Eliminate ancillary ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you