Sludge Management Equipment For Water And Wastewater In Peru
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
In the process of treating waste water, fine biological sludge is constantly produced during the decomposition process at a sewage treatment plant. For a stable decomposition process in the biological treatment phase, the sludge produced in the secondary sedimentation pond, also known as excess sludge, is removed and fed into the digestion tower. Flottweg's OSE decanters thicken the sludge before ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Full power with reduced energy consumption. Decanter centrifuges for sewage sludge and waste water applications. The demands on the quality and efficiency of sewage treatment plants are growing from year to year, not least due to rising energy and disposal costs. As a result, using decanters to dewater sludge means using state-of-the-art technology. The C-series decanters from Flottweg achieve ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The New C2E Decanter Centrifuges for Small Treatment Plants Flottweg presents a new era of sludge dewatering for small sewage treatment plants. The C2E decanter centrifuge was developed specifically for the dewatering and thickening of smaller sludge loading rates. It features all of Flottweg's know-how in a compact, space-saving design. Over five decades, Flottweg has gathered rich knowledge of ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The Flottweg Z8E: The Giant Decanter With the new Z8E decanter centrifuge, Flottweg is extending its product range and setting new standards. Right from the start of development of the Z8E, the target was set of concentrating on the specific requirements of an extremely wide range of industries. The modular design of this decanter centrifuge means it is possible to adjust optimally to all kinds ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The Cambi Thermal Hydrolysis Process improves Anaerobic Digestion by using high temperature and pressure to break down complex substrates before they are introduced to the digestion process. Sludges treated through the Cambi process can also be introduced into a Digester at a much higher concentration. The results of incorporating Cambi at a WWTP are: up to 50% higher biogas production, ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Honored with the German Innovation Award 2019, the Xelletor series is one of the greatest achievements in the field of sewage sludge. Dewatering sewage sludge is standard for wastewater treatment plants and since it usually has to be transported away, operators have an interest in separating as much water as possible from the sludge. This saves weight and thus reduces costs. Savings of up to 10% ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Sewage sludge dewatering offers enormous potential savings for the operators of sewage treatment plants. The costs of transport and disposal of the dewatered sewage sludge frequently make up 80% of operating costs. Depending on the capacity of the plant, 1% more dry substance in the dewatered sewage sludge can represent cost savings in the five- to six-digit range. ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The centrifuge for dewatering sewage sludge. The transportation and disposal of the sewage sludge accounts for a large proportion sewage treatment plant costs. The lower the sludge volume, the lower the cost of transportation and disposal. High-performance in sludge dewatering is the decisive criterion. With a Flottweg HTS Decanter® the highest possible dry solids content is achieved in ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hang-in probe with capacitive ceramic measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The GTA Pump series are multi-purpose submersible Archimedes positive displacement high performance screw pumps. In addition to being a primary oil transfer pump, the GTA pumps can be utilized for numerous applications such as offloading emergency pumping of heavy crude, bitumen, tank cleaning, pipeline maintenance, sludge removal ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Capacity range 25–100 m³/h, 10–4 bar; The compact rotary lobe pump pumps viscose and even abrasive media at up to 100 m³/h and also with reversible pumping direction thanks to its valveless construction. Housing, plunger and seals are available in different materials to match the ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Many wastewater treatment plants handle a waste stream of digested sludge. the sludge is normally dewatered on a centrifuge or belt filter press. After dewatering, the sludge has a typical dry solids content of approx. 20-25%, which is very suitable for thermal treatment i an ANDRITZ Gouda paddle dryer. More and more sludges are being incinirated, requiring a partial drying process to 35-40% dry ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The PowerPress is a robust and efficient, but nonetheless reasonably priced dewatering unit for a large number of sludge. Its long filtration zones and high pressures ensure optimum dryness levels, and the reduced polymer consumption and ease of maintenance induce significant cost ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
To meet the growing demand of small sewage treatment plants, ANDRITZ has added the Aquaspir screen SC to its product line. This shaft less screw screen not only screens and conveys the solids, but also dewaters and compacts the screenings - all in a single integrated ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The SpiroSand is a simple and reliable piece of equipment that removes sand and heavy sediments as well as floating debris from sewage effluent before they are able to plug equipment or cause abrasive wear to downstream machinery. ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Continuous, flexible, reliable, safe - the solid bowl decanter is used for chemical and industrial separation applications. The solid bowl decanter is a basic, standard machine to which features can be added for special applications. The solid bowl is ideal for clarification of liquids, thickening of sludges, and separation of ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens sensor for suspended solids and turbidity measurement in water, wastewater and utilities. Turbimax CUS51D is a smart sensor that allows unattended operation in a wide range of process conditions. Its unique design is extremely robust and it is also low-maintenance thanks to its self-cleaning functionality. Choose from different integrated analytical models to adapt the sensor to your ...
-
based in NETHERLANDS
Application: Anaerobic waste water treatment is applied in many industrial areas for waste water purification of water containing large amounts of organics (COD > 2.000 ...
-
Manufactured by Salherbased in SPAIN
Salher sludge thickeners are manufactured in GFRP (glass fiber reinforced polyester) with orthophthalic resins and are used for the dehydration or thickening of sludge produced during primary and secondary treatments. They are truncated cone-shaped equipment consisting of a central feeding chamber and a Thompson perimeter canal. They can be supplied for underground or above-ground installation, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you