Sludge Mixing Equipment For Water And Wastewater Available In Bahrain
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
It consists of three chambers, one for mixing, one for maturation and one for collecting the mature polyelectrolyte at the optimum point for use. The retention time of each chamber is 30 minutes. It includes an anti-condensation nozzle for the exit of the polyelectrolyte. It has a double helix to favour mixing. It can work with both powdered and emulsified polyelectrolyte. Continuous operation. ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The Bright Technologies Belt Filter Press is a modern design that includes three (3) US Patents and many innovative features that provide high performance in a compact, high value package. Many competing products are based on old and inferior designs that do not utilize filtration area effectively. Our belt press is designed with long term value and ease of operation in mind. Stainless Steel ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
It facilitates sludge treatment making sludge dewatering more cost effective and efficient. Toro Equipment’s Sludge Conditioning Tank (TAF) is a vertical cylindrical GRP tank that allows the chemical conditioning of sludge, facilitating filtration or decantation ...
-
PremiumManufactured by Proco Products, Inc.based in USA
The ProFlex™ 710TT has been engineered and developed to be the most efficient and specifiable valve to ensure 100% mixing capability in potable water and sewage reservoir/storage tanks. Under U.S. Patent No. 11,396,951, the new patented torsional flow design of the valve provides a unique spinning motion which has never been offered before and is a stand-alone feature. Its operational ...
-
PremiumManufactured by Reliant Water Technologiesbased in USA
Recreational ponds, wastewater lagoons, fish grow-out ponds and small, shallow lakes have always exhibited the problem of organic matter collecting on the bottom and eventually becoming polluted. Wastewater lagoons are especially fraught with problems because their purpose is to clean the wastewater to the point that it can be released back into the environment. Over the years many different ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Can work with both powdered and emulsified polyelectrolyte. Continuous operation. Made of stainless ...
-
Manufactured by ENCON Evaporatorsbased in USA
ENCON offers the ENCON Drum Dryer for dewatering concentrated slurries and sludge to a dry landfillable (see NOTE below) condition. These systems are electrically heated, operate in batch mode, and are controlled on a time and temperature basis. Typical applications include: bottoms from ENCON Thermal evaporator, concentrate from ENCON MVC Evaporators, concentrated salt slurries, viscous ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The Hydroflux GT is a unique product that will remove grease, oils and solids from commercial kitchen wastewater to allow discharge of the wastewater to sewer. It offers a lower footprint than traditional DAF systems and utilises almost half the ...
-
Manufactured by Entec International BVbased in NETHERLANDS
Element type: STT, STS, STL and STM. Area of application: food, oil and gas industry, petrochemicals, pulp and paper production. General design in steel/special, with fixed and/or removable elements and a standard finish. Available with heating-/cooling jackets and injectors-/connection ...
-
Manufactured by MXQ, LLCbased in USA
Disk pumps are a crucial part of various industries including oil & gas, pulp & paper, chemical, food & beverages, and wastewater treatment. They vary in type and designs depending on the application. MXQ’s industrial disk pumps are manufactured using the latest technology that helps eliminate the issue of clogging. These pumps can be customized to function as impellers. Our ...
-
Manufactured by Simon Moos A/Sbased in DENMARK
The MOOS lime mixer allows you to transform sludge into valuable fertiliser on-site. The MOOS lime mixer automatically mixes dewatered sludge and lime. It is fast and efficient and produces sludge with a pH value of 12+, which wipes out all pathogens. This leaves you with a high-value fertiliser which can be spread on agricultural land. The lime mixer is a compact and mobile unit that can be set ...
-
Manufactured by Colberge Water Systems- Enkrottbased in PORTUGAL
Slow speed agitators well adapted for reagent preparation, neutralization, sludge suspension, flash mixing, with highly performing and low energy ...
-
Manufactured by Hidrostal Holding AGbased in SWITZERLAND
HidroMix, the original solution for tank mixing systems. The Original Solution for Tank Mixing Systems. HidroMix pump mixing system for sludge tanks and digesters, provides a more efficient, safe and economic is a practical alternative to conventional submersible and gas mixers. The key objective with any form of sludge storage is to avoid the build-up and settlement of any wastewater solids ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The strainpress sludge screen is a pressure-fed inline system for screening any type of sludge, including highly viscous and greasy waste. Efficient and reliable sludge screens for removal of disturbing solids (e.g. plastics, hair and fibres) are necessary to prevent disruption of subsequent sludge treatment processes and ...
-
Manufactured by Purestream, Inc. and Purestream ES , LLCbased in USA
Purestream ES, LLC is proud to offer Sigma Model APM low-speed mixers. These submersible mixers are designed using a direct-drive propeller system without using a gearbox. The mixer’s speed is determined by the number of poles on the motor winding. Equipped with two possible configurations for protection against seal leaks depending on size, the Sigma mixer is suited for a ...
-
Manufactured by Enviropaxbased in USA
This impeller uses four vertical blades that are formed in a curved or swept design. This impeller also pumps out in a radial direction. The curved blade design is good for solids mixing applications where resuspension of settled solids maybe required after the mixer is shut down. This impeller is good for applications like carbon slurry, sludge mixing, chemical day tanks - and in combination ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
Rectangular type grit chambers are used extensively in wastewater treatment systems as aerobic and anaerobic. In order to remove the solids which are settled at the bottom of this kind grit chambers, there is used scraper systems. By the scrapers which move two-way through the grit chamber, the grits are pushed to the drain at the bottom of canal and from here are taken from the tank by sucking ...
-
Manufactured by Mixing Systems, Inc.based in USA
High chrome construction for abrassion resistance flange connection for sludge ...
-
Manufactured by Adiss S.A.based in ROMANIA
The ADIPUR compact wastewater treatment plant is one main product of our company. ADIPUR is intended for advanced treatment (it also reduces nitrogen and phosphorus) of the urban wastewater and of the domestic wastewater in urban areas with an aproximate number of 6.000 equivalent inhabitants. In particular cases these plants can expand to treating urban wastewater for up to 12.000 ...
-
Manufactured by Canamidex International Corp.based in CANADA
Belt filter presses are primarily used for sludge dewatering prior to drying or disposal. They are a continuously operating machine which dewater sludge by pressing it between two Porous filter belts. Typically, a belt filter press receives a slurry ranging from 1-5% feed solids and produces a final product of 12-35% cake solids. Performance depends on the nature of the solids being processed and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you