Sluice Gates Equipment For Water And Wastewater Available In Kazakhstan
-
PremiumManufactured by Proco Products, Inc.based in USA
TheProco ProFlex Style 710 flanged duckbill check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT Stop Logs (KSL) are similar to the KWT Stop Board in functionality. The logs can be rackstored, and come in many variations (sizes, thickness, material). They are used in surface-, sewer- and process water systems. A full stop log is composed from individually removable aluminum ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side Wall mounting. Frame: EN 1.4301 Plate: PEHD 500. On and off-seating pressure, max. 3 bar DIN 19569 table 4 ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The HOS/MPR gear operators are manufactured from high quality materials and life tested ensuring that maximum performance, quality and reliability are consistently maintained. Operating temperature normally ranges from -40 ºC to 120 ºC, although other temperature ranges are available on ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
'A' Series Bevel Gear Operators have been especially designed to operate valves and sluice gates, both in rising and non-rising stem ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side.Appllication as way and motorway sluice.Materials:Frame: EN 1.4404 - PEHD 500.Plate: EN 1.4404. Pressure: On-seating pressure, max. 4 mWs.DIN 19569 table 4 ...
-
Manufactured by Sistag AGbased in SWITZERLAND
Design: 4-sides tight, Steel fabricated construction with fully guided gate. Width: 150, 200, 250, 300, 350, 400, 500 mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation Socket (4). Main applications: Water & Waste Water ...
-
Manufactured by Yeditepe Aritimbased in TURKEY
Sluice gates are used for flow control at the inlet and outlet structures of basins or units. The design of these structures complies with either AWWA C560 ,BS 7775 or DIN EN 19569 standards. These can be operated manually or automatically upon client requests. Sluice gates can be manufactured from aluminum, epoxy coated or galvanized steel or stainless steel. The sluice gates could be ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by BIOGEST AGbased in GERMANY
The SA can be used when it is desirable to completely close a chamber inlet/outlet at a pre-determined water level within the chamber. The SA can be used to limit the top water level as well as a non-return valve. The SA is a reliable non-powered alternative to an electrically actuated ...
-
Manufactured by Watch Technologiesbased in USA
Robust, easily installed and solar-ready, WT’s low cost Medium-Lift Gate Actuators are the best solution for medium to large gates and valves at headgates, check structures, canals, laterals, pipeline control stations, water treatment, and industrial applications; SCADA-ready. Unique design:Watch Technologies’ WT-200 Medium-Lift Gate Actuators provide a simple, easily serviceable, new ...
-
Manufactured by Imesa S.A.based in SPAIN
We carry out all kinds of sluice gate projects for the different sectors and types of hydroelectric power station anywhere in the world, without limit on size, and in the best-quality carbon-painted, galvanised and stainless steel, sealed on three and four sides and different types of activation: manual electric, pneumatic and hydraulic. Internationally, we are currently present in Spain, ...
-
Manufactured by Fontaine-Aquanox Water Control Gatesbased in CANADA
Fontaine-Aquanox’s SERIES 20 Sluice Gate is a highly versatile flow control gate with various types of mountings. Adaptable to different applications, the SERIES 20 can be designed to the required seating and unseating heads. The seal design keeps the allowable leakage rate to 0.04 U.S. gpm per foot (0.50 l/min per meter) of seating ...
-
Manufactured by Claro Incbased in CANADA
Claro offers a variety of Parshall flumes and sluice gates in conjunction with its screening and grit removal systems. This auxiliary equipment is manufactured to suit the requirements of your ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Hand operated bevel gears suited for sluice gates, gate, and globe valves. Torque range up to 8,018 Nm (5,914 lbf.ft). Thrust range up to 1,557 kN (350,028 lbf). 12 sizes. Ratios from 2:1 to ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal. Double P gate seals typically secured and bolted through the stem to provide bulb ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT penstocks are available in various designs and are used in surface, sewage and process water systems. This sluice gate is a tried and tested penstock model, as it has been a core product for many years. The KSA-MD sluice gate is a spindle operated and reinforced sliding plate that shuts off a round or square opening; it moves within a stainless steel 316L frame with HDPE guides. The tight ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our omega gate seals are often used to create an internal seal between two surfaces on underwater tunnels. These seals generally perform as a membrane as they are exposed to three dimensional movements between the tunnel sections. Omega seals can also be reinforced with fabric in order to enhance the seal with additional mechanical properties. We can increase or decrease the number of fabric ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of ductile iron multi-turn bevel gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT weirs are very varied and are used in surface, sewage and process water systems. The KOS system is a vertical gate that allows a constant adjustment of the upstream water level and can be used to keep the upstream water level at a desired level. The water flows over the gate thus creating an overshot, and allows for very accurate adjustment of the water flow. These KWT weir penstocks can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you