Sluice Gates Equipment For Water And Wastewater Available In Macedonia
-
PremiumManufactured by Proco Products, Inc.based in USA
TheProco ProFlex Style 710 flanged duckbill check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side Wall mounting. Frame: EN 1.4301 Plate: PEHD 500. On and off-seating pressure, max. 3 bar DIN 19569 table 4 ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT penstocks are available in various designs and are used in surface, sewage and process water systems. This sluice gate is a tried and tested penstock model, as it has been a core product for many years. The KSA-MD sluice gate is a spindle operated and reinforced sliding plate that shuts off a round or square opening; it moves within a stainless steel 316L frame with HDPE guides. The tight ...
-
Manufactured by Yeditepe Aritimbased in TURKEY
Sluice gates are used for flow control at the inlet and outlet structures of basins or units. The design of these structures complies with either AWWA C560 ,BS 7775 or DIN EN 19569 standards. These can be operated manually or automatically upon client requests. Sluice gates can be manufactured from aluminum, epoxy coated or galvanized steel or stainless steel. The sluice gates could be ...
-
Manufactured by Sistag AGbased in SWITZERLAND
Design: 4-sides tight, Steel fabricated construction with fully guided gate. Width: 150, 200, 250, 300, 350, 400, 500 mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation Socket (4). Main applications: Water & Waste Water ...
-
Manufactured by Imesa S.A.based in SPAIN
We carry out all kinds of sluice gate projects for the different sectors and types of hydroelectric power station anywhere in the world, without limit on size, and in the best-quality carbon-painted, galvanised and stainless steel, sealed on three and four sides and different types of activation: manual electric, pneumatic and hydraulic. Internationally, we are currently present in Spain, ...
-
Manufactured by Hydro Gate - a subsidiary of Mueller Water Products Inc.based in USA
Hydro Gate cast iron slide gates, formerly known as sluice gates, are used to control the flow of fluid through openings under seating or unseating head. Under seating pressure, fluid exerts a force on the front of the gate. The pressure of the water forces the gate slide against the frame which causes the gate to seal tightly. In the design of a structure where cast iron slide gates are used, ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side.Appllication as way and motorway sluice.Materials:Frame: EN 1.4404 - PEHD 500.Plate: EN 1.4404. Pressure: On-seating pressure, max. 4 mWs.DIN 19569 table 4 ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The HOS/MPR gear operators are manufactured from high quality materials and life tested ensuring that maximum performance, quality and reliability are consistently maintained. Operating temperature normally ranges from -40 ºC to 120 ºC, although other temperature ranges are available on ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT Stop Logs (KSL) are similar to the KWT Stop Board in functionality. The logs can be rackstored, and come in many variations (sizes, thickness, material). They are used in surface-, sewer- and process water systems. A full stop log is composed from individually removable aluminum ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT weirs are very varied and are used in surface, sewage and process water systems. The KOS system is a vertical gate that allows a constant adjustment of the upstream water level and can be used to keep the upstream water level at a desired level. The water flows over the gate thus creating an overshot, and allows for very accurate adjustment of the water flow. These KWT weir penstocks can be ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
Wall type penstocks are used to control the flows in the tanks at the water and wastewater treatment plant and to provide the isolation. At all designs of ENTA especially the impermeability is provided by the use of the P,V and double-lipped seals besides the four side of the penstocks and for 1 m seal length (at the pressure of 5 m on seat or 4 m off-seat), there is reached to the very low ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of ductile iron multi-turn bevel gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch ...
-
Manufactured by Watch Technologiesbased in USA
WT Smart Gate Actuators do what no other actuator can by operating a gate with an embedded controller capable of controlling for any gate application and performing all the functions of an RTU; connect multiple sensors to the actuator (digital or analog) and use digital outputs to control on-site associated equipment. WT Smart Actuators take a versatile and robust device and give it all the ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
We can manufacture our hump gate seals in two standard formats. Either with a single or double hump depending on the application. Hump seals are generally used for sealing the top edge of submerged vertucal-lift gates. Our hump seal are typically bolted either side of the hump or the flat stem section of the profile. The hump section is then pressed against the sealing surface. The flexibility of ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Hand operated bevel gears suited for sluice gates, gate, and globe valves. Torque range up to 8,018 Nm (5,914 lbf.ft). Thrust range up to 1,557 kN (350,028 lbf). 12 sizes. Ratios from 2:1 to ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our omega gate seals are often used to create an internal seal between two surfaces on underwater tunnels. These seals generally perform as a membrane as they are exposed to three dimensional movements between the tunnel sections. Omega seals can also be reinforced with fabric in order to enhance the seal with additional mechanical properties. We can increase or decrease the number of fabric ...
-
Manufactured by Watch Technologiesbased in USA
Robust, easily installed and solar-ready, WT’s low cost Medium-Lift Gate Actuators are the best solution for medium to large gates and valves at headgates, check structures, canals, laterals, pipeline control stations, water treatment, and industrial applications; SCADA-ready. Unique design:Watch Technologies’ WT-200 Medium-Lift Gate Actuators provide a simple, easily serviceable, new ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork has a wide range of multi-turn bevel/spur gearboxes which can be used for the most demanding manual and motorised applications for globe valves, gate valves and sluice gates. The output torque ranges up to 46,100 Nm and thrust range up to 4,350 kN. The multi-turn output gearboxes are available in various sizes and combinations with ratios from 1:1 to 360:1 and the majority of them can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you