Sluice Gates Equipment For Water And Wastewater In Italy
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Hand operated bevel gears suited for sluice gates, gate, and globe valves. Torque range up to 8,018 Nm (5,914 lbf.ft). Thrust range up to 1,557 kN (350,028 lbf). 12 sizes. Ratios from 2:1 to ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork has a wide range of multi-turn bevel/spur gearboxes which can be used for the most demanding manual and motorised applications for globe valves, gate valves and sluice gates. The output torque ranges up to 46,100 Nm and thrust range up to 4,350 kN. The multi-turn output gearboxes are available in various sizes and combinations with ratios from 1:1 to 360:1 and the majority of them can be ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
'A' Series Bevel Gear Operators have been especially designed to operate valves and sluice gates, both in rising and non-rising stem ...
-
Manufactured by FRIULANA COSTRUZIONI s.r.l.based in ITALY
The three-side sealing sluice gate with actuator has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated automatically by an actuator. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to not exhibit any projecting bumps that could cause an ...
-
Manufactured by FRIULANA COSTRUZIONI s.r.l.based in ITALY
The telescopic valve has the function of regulating and/or blocking the extraction of the liquid in a basin, thanks to the cursor height adjustment, which is controlled manually (by handwheel) and/or automatically (by actuator). The hydraulic seal is ensured by an O ring, having a section suitable for the cursor ...
-
Manufactured by FRIULANA COSTRUZIONI s.r.l.based in ITALY
The plank has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is carried out manually or by external lifting means. The plank can be made in a single piece or consist of multiple parts inserted one into the other to reach the desired ...
-
Manufactured by FRIULANA COSTRUZIONI s.r.l.based in ITALY
The four-side sealing sluice gate with actuator has the function of hermetically blocking a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated automatically by an actuator. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to not exhibit any projecting bumps that could cause an imperfect ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The HOS/MPR gear operators are manufactured from high quality materials and life tested ensuring that maximum performance, quality and reliability are consistently maintained. Operating temperature normally ranges from -40 ºC to 120 ºC, although other temperature ranges are available on ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of ductile iron multi-turn bevel gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Heavy-duty stainless steel 316 housing multi-turn gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch ...
-
Manufactured by FRIULANA COSTRUZIONI s.r.l.based in ITALY
The three-side sealing sluice gate with manual actuation has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated manually by a handwheel. The sluice gate is fixed to the wall of the channels, usually made of reinforced concrete, finished so as to not exhibit any projecting bumps that could cause ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of heavy-duty cast iron multi-turn spur gearboxes suitable for the most demanding motorised applications where the gearbox input shaft needs to be parallel with the valve stem for globe and gate valves and sluice ...
-
Manufactured by FRIULANA COSTRUZIONI s.r.l.based in ITALY
The clapet valve has the function of allowing the flow of water coming from a channel towards the river, while preventing the back-flow of the water of rivers in a flood, towards the channel. This function is ensured by the opening of a pad actuated by the thrust of the water coming from the channel. A special balance weight is fitted on top of the clapet valve to aid the valve opening also in ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of heavy-duty cast iron multi-turn spur gearboxes suitable for the most demanding motorised applications where the gearbox input shaft needs to be parallel with the valve stem for globe and gate valves and sluice gates. Torque range up to 43,386 Nm (32,000 lbf.ft). Thrust range up to 2,900 kN (652,000 lbf). 20 sizes. Ratios from 1:1 to ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Sorgent.e Srlbased in ITALY
Through its own operating structures and the synergy between its resources and external partners, STE energy is able to design and implement mechanical and hydraulic cut-off systems for hydropower ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Heavy-duty stainless steel 316 housing multi-turn gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Product Features: For gate valves and sluice gates with rugged cast iron construction. Stainless Steel housing ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Complete range of multi-turn bevel gearboxes with two shafts for use with dual stem sluice gates and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you