Sluices Equipment For Water And Wastewater Available In Angola
-
ShowcaseManufactured by Amafilter®based in NETHERLANDS
The Versis® is a fully automated system with double sided stainless steel pressure filter leaves. It is suitable for most ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
This system is equipped with stainless steel filter leaves mounted on a manifold at the centre of the filter system. It is designed with an oscillating sluice pipe positioned above the filter leaf elements for easy cake ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
This system is ideal for use in filtration of catalyst particles. It filters with an 88 m2 filtration area and is designed to feature a half pipe heating jacket for controlling the temperature of its ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
This system is equipped with stainless steel filter leaves mounted on a manifold at the centre of the filter system, allowing for the easy and quick removal for maintenance or ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
This system has been designed with a retractable shell with a bayonet ring which allows it to be opened ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
This system has been designed with a retractable bundle which can be moved in and out of the the filter body without the system being ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The new electronic NDW 2 inclinometer utilises a modern measurement method based on MEMS technology for gravitational inclination measurement (rotational angle ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
This system is available as a tandem unit, where two pressure leaf filter systems are positioned cover to ...
-
PremiumManufactured by Proco Products, Inc.based in USA
TheProco ProFlex Style 710 flanged duckbill check valve is designed to bolt directly to both existing flanges, as well as new installations. The flanges are drilled 150# standard, however other drilling standards are available upon request. The ProFlex Style 710 can be installed in either a vertical or horizontal ...
-
PremiumManufactured by Amafilter®based in NETHERLANDS
The MVDCD vertical pressure leaf filter system requires only a small footprint and provides easy access to the pressure filter leaves for removal of the ...
-
Manufactured by Potential Engineeringbased in INDIA
Weir gate is used to control and regulate of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. Sizes range from 150mm to 2000mm. It can be made in Circular, Rectangular or Square section. Selection of the correct Weir gate to suit the duty is important to satisfy the design criteria and provide the most cost effective ...
-
Manufactured by JSC Radviliskis Machine Factorybased in LITHUANIA
Sawdust, wood shavings and chips shredding and pelletizing equipment set is intended to pelletize wooden raw material. Size of raw material must be no bigger than 2x2x0,5cm. It's very important to have dry and clena raw materiak. To make good quality pellet raw material humidity can't be higher than 11%, impurities like sand, gravel, metal parts, branches are not allowed. We can also propose ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open ...
-
Manufactured by Waterman Industriesbased in USA
WATERMAN HEAVY-DUTY CAST IRON SLIDE (SLUICE) GATES are used in applications where safety and reliable performance are essential (dams, tidal environments, water treatment plants) and where outstanding product longevity is desired. Waterman cast gates are preferred for high-head (up to 200′) and high debris (water treatment) environments as well as for critical gateways in treatment plants. ...
-
Manufactured by BÜSCH Technology GmbHbased in GERMANY
Lowering type penstocks get open by moving the plate downwards. The water will flow over the plate when the penstock is open. Lowering type penstocks get used in application, where it is important to hold the water-level ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Water Technology Resources (WTR)based in USA
Cast and Fabricated. Size Range 2' x 2' up to 14' x 14'. Materials of Construction: Fabricated Steel / Ductile Iron / Cast Iron / Stainless Steel / CoPlastic. Bronze Seating Surface. ...
-
Manufactured by PB Equipmentbased in USA
Plant-Duty gates are specifically engineered for the most severe service in water and wastewater treatment plants. All Plant-Duty gates provide heavy duty construction for years and years of dependable service. We manufacture them using TFE-clad neoprene J-bulb seals, UHME PE bearing strips, and all stainless steel fasteners and hardware. Outside bearing housings are powder coated for extra ...
-
Manufactured by Tramspreadbased in UNITED KINGDOM
The TRAMSPREAD 6m Dribble/12m Twin nozzle spread Combination Bar is one machine capable of performing two ...
-
Manufactured by Tramspreadbased in UNITED KINGDOM
Available in spread widths from 8m (single outlet) up to 24m (triple outlet), the TRAMSPREAD spread nozzle applicators are built to a high quality and are fully galvanised. With attention to setting of height and output angle on the twin outlet boom it is possible to produce a spread pattern with a coefficient of variation of below 20% in the field. A low level spread with large droplets ensures ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you