Solar Pumps Articles

  • Bredel 65 pumps eliminates AODD pump issues at major lithium battery plant

    Bredel 65 hose pumps from Watson-Marlow Fluid Technology Group are now providing constant efficiency in ball-milling processes at a high-volume battery plant in China. Previously, ball milling was being compromised by a poorly performing AODD (air-operated double diaphragm) pump used for high-viscosity slurry recirculation. Reduced flow/efficiency and leaks were proving disruptive ...

  • Energy-efficient Cooling System for Musikkens Hus (House of Music)

    DESMI has delivered and installed highly efficient pumps, pipes and wells for intake of water from the fiord for the cooling system of Musikkens Hus. Musikkens Hus is known as the musical gathering point of Northern Denmark and covers more than 20,000 m2 distributed on nine storeys and among other facilities it hosts four concert halls, five stages, a restaurant, and educational ...


    By DESMI A/S

  • Signs You Need a New Water Pump

    Motor vehicles are built upon small parts doing big jobs. Consider your engine. It is likely the most important machine within your car, truck, or SUV, but it is not made up of one or two components, but thousands. Some engines have over 14,000 different parts to keep them operational. If just one of these parts, such as the water pump, fails, then the entire engine could grind to a halt. ...


    By IndustrialZone

  • Made to Bear Extreme Conditions

    Working below sea level, 24 hours a day, 7 days a week, subsea pumps are high-power and high-speed rotating equipment that perform under extreme conditions. Every single part of the pump has to be designed to be extremely reliable and must be tested intensively. The newly developed tilting-pad bearings offer advantages that can be used in other areas of application as well. Certain ...


    By Sulzer Management Ltd

  • Rerating Pipeline Pumps

    Pipeline operators transport billions of gallons of oil every year, and they are constantly looking at ways of improving efficiency and reducing costs. Depending on changing network demands, this might require managing an increase or decrease in flow rate in the pipeline, a change in pressure, or a pump upgrade to more efficient technology. Throughout the life of a pipeline, the process ...


    By Sulzer Management Ltd

  • Adapted optimization model for planning regional wastewater systems: case study

    Wastewater systems are of crucial importance to the promotion of sustainable development. Through an integrated planning approach, the costs can be minimized and the resulting benefits maximized. A planning approach at regional level exploits the economies of scale, while achieving a better environmental performance. In this paper we set out a decision support approach for the planning of ...


    By IWA Publishing

  • Xylem helps Italian spa go with the flow

    A case study on the termal Hotel Mamma Margherita, Abano Terme (Padova) For many people, a relaxing break in a secluded Italian spa is the ideal way to recharge. However, what many may not be aware of is the importance of a solid and reliable pumping system to keep activity above the surface running seamlessly. Hotel Mamma Margherita, situated in Padua, north-east Italy, ...


    By LOWARA - a Xylem brand

  • DESMI making in-roads in French bitumen market

    When a large road builder needs to build a bitumen plant or wins a road-building project, it typically asks an OEM manufacturer to provide a complete, turnkey bitumen plant. And in France, as with many other regions of the world, such manufacturers are increasingly turning to Danish-based pump manufacturer DESMI. Bitumen ...


    By DESMI A/S

  • Ideal beverage pumping starts with space-saving solutions

    Streamlined BIB platforms also provide reliability and performance At a time when fountain installers and bottlers are asking their distributor partners in beverage dispense for the ideal pump for standard bag-in-box (BIB) applications; and restaurant, bar, gas station and convenience store owners and operators are seeking more efficient and innovative backroom solutions to satisfy their ...

  • Steam Enhanced Creosote Pumping - Case Study

    AutoPump Integral to Innovative Steam Injection Process Used to Clean Up DOE Facility in Ohio SteamTech Inc. of Bakersfield, California, a 35-year-old firm with roots in the oil field industry, is working for Bechtel-Jacobs at the Gaseous Diffusion plant in Piketon, Ohio. Bechtel-Jacobs considered several innovative remediation technologies and chose the steam injection process ...


    By QED Environmental Systems

  • Emergency scenarios in the Banger polder, Semarang City: a case study to identify different emergency scenarios

    In Semarang urban coastal areas experience daily flooding from the sea during high tide (tidal flooding). Flourishing residential areas have changed into unhealthy slums with the nuisance of daily flooding in parts of the city. To overcome these problems a polder system was implemented to address the tidal flooding. The Semarang polder system is the first fully operational polder system in a ...


    By IWA Publishing

  • Case study - Mazzei airjection aeration system installed in Alabama Field Erected WWTP

    Activated Sludge Treatment in a Municipal Sewage Treatment Plant. Huntsville, AL The Problem: A design/build contractor needed a quiet, efficient aeration system for a 250,000 GPD field erected WWTP. This plant was to be located adjacent to a school. A restriction on ambient noise at the location of the proposed WWTP required a quiet aeration process. ...

  • Pumping Stations, Your Options

    There are many things to consider when thinking about pumping systems in developments, our Pumping Stations Manager talks through the options. Along with budgets, there are many factors to consider when choosing the right pumping station for a development, such as; Technical specifications – how much effluent is the pumping station going to need to remove? ...


    By T-T Pumps Ltd.

  • BBA Mobile Emergency Pumps Provide Rapid Response for Floods

    Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response In its latest edition, the North American PUMPS & SYSTEMS magazine publishes an in-depth article featuring the history and current usage of emergency mobile pumps. The Western European ...


    By BBA Pumps

  • Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response

    The Western European nation has 20 mobile diesel-driven pumps on standby, ready to assist in national and international emergencies. One of the smallest and most densely populated countries in Western Europe, the Netherlands has nearly 10 million residents who live and work below sea level. Without active water management and primary flood defenses, ...


    By BBA Pumps

  • Water Source Heat Pumps For 14th Century Castle In Oxfordshire

    Better Planet was selected to design, supply, install and commission two brine to water heat pumps with a combined thermal output of 70 kW for this castle in Oxfordshire replacing oil heating. In preparation of the project, Better Planet carried out a room by room heat loss calculation allowing us to advice the client on required upgrades of radiators in ...


  • A PSO approach for optimum design of dynamic inversion controller in water distribution systems

    Water distribution systems have become immensely complex due to ever increasing water demand and sporadic availability of water at the sources. Generally, water management issues are handled through human intervention, which naturally leads to incompetent trial and error procedures. Moreover, the non-linear system dynamics and sequential pumping operations involved in the water distribution ...


    By IWA Publishing

  • Bell & Gossett introduces new hydronic pump selection criteria to maximize system efficiency

    Energy and maintenance expenses account for approximately 75 percent of the life-cycle costs of a centrifugal pump. With a growing emphasis on reducing energy consumption driven by government regulation and businesses seeking operational and financial efficiencies, HVAC system designers are seeking system solutions that maximize efficiencies while reducing costs. To address this demand and the ...

  • Getting an air source heat pump from Better Planet – from first discussion to finished project

    Initial contact The initial contact is often on the phone and we try to establish if an air source heat pump makes sense from a financial and technical point of view. Heat pumps makes sense for most new built projects. For retrofits, heat pumps makes most sense for properties not connected to the gas grid. If you are connected to the gas grid, ...


  • ZF has improved pump production with an Equator gauging system - compact, rugged and able to inspect - Case Study

    ZF Marine in Padua, Italy, a manufacturer of pumps for marine propulsion systems, was looking for faster process control, with greater measurement capability. “We realised that it was possible to save time,” explains Gerardo Matterazzo, Quality Manager at ZF, “but we had to identify the right tool. With the Equator process control system from Renishaw, we found a gauging machine ...


    By Renishaw plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you