Spillways Equipment For Water And Wastewater Available In Louisiana
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank® are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical strength. It consists of injecting a reactive ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Produces polished effect, high output water quality. Protected from outlet overloads. Robust, high strength infused GRP lamella construction,no colapsa. Easy cleaning. Capacity: From 133 m3/h up to 5864 ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
The plates of settler W-Tank are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Total Dissolved Gas (TDG) is the sum of the partial pressures of all gases in a water sample. Normally, the sum of gas partial pressures will be about one atmosphere (15 psi) for any water that is exposed to the atmosphere. The partial pressure of each gas will be the same as that’s gas’s contribution to atmospheric pressure, i.e. about 20% oxygen, 79 % nitrogen, and 1% trace gases. ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Its mission is to eliminate the solids carried by the water, in order to avoid clogging and mechanical problems in the installations. This equipment requires little maintenance and operates continuously, without the need for electricity. In urban waters, they can replace primary decanters in many cases, providing the elimination of coarse sands and up to 30% percentages of grease and effluent ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Produces polished effect, high output water quality. Protected from outlet overloads. Robust, high strength infused GRP lamella construction,no colapsa. Easy cleaning. Defender - Model TR - Rotary Screens: From 7m³/h up to ...
-
Manufactured by Obermeyer Hydro, Inc.based in USA
Obermeyer Hydro endeavors to design and supply the very highest quality inflatable dams available. Made in the United States, Obermeyer inflatable dams are supported by extensive engineering analysis and are custom designed to incorporate seamless construction, steel reinforcement (as standard), minimized stress concentrations, minimal or zero creases, robust flow separation control, and superior ...
-
Manufactured by Steel-Fab, Inc.based in USA
Tainter (Radial) Gates consist of a curved skinplate reinforced by horizontal or vertical stiffening ribs and supported by radial arms on each side of the gate. Tainter gates are commonly used for flood control on spillways where vertical lift gates are impractical. The operating machinery is located above the tainter gate and typically includes wire rope hoists, chain or drum hoists, or ...
-
Manufactured by Steel-Fab, Inc.based in USA
Steel-Fab floating bulkheads consist of a series of sealed caissons with integral ballast chambers that can be filled with water or pressurized with air. The caissons are assembled on the impoundment and then the appropriate ballast chambers are filled with water to vertically lower the bulkhead into position in front of the corresponding spillway gate. For removal, the chambers are vacated with ...
-
Manufactured by Rodney Hunt Company - VAG Valve and Gate Groupbased in USA
Pelican® Gates are usually mounted on the crest of a dam and are hinged along the invert. There are several different types, but all lower to open and raise to ...
-
Manufactured by ENECON Corporationbased in USA
ENECRETE DuraQuartz is a three component, 100% solids, concrete repair compound specifically formulated and precisely engineered to provide solutions to even the most difficult concrete repair and protection ...
-
Manufactured by Obermeyer Hydro, Inc.based in USA
Obermeyer Spillway Gates allow increased water storage capacity at new or existing reservoirs with little or no decrease in spillway capacity. In the case of legacy spillways recently determined to have inadequate flood flow capacity, the spillway invert may be lowered to provide the required flood flow capacity while Obermeyer gates are installed to provide increased storage ...
-
Manufactured by REEL COH Inc.based in CANADA
REEL COH specializes in the design, fabrication and installation of Gates, Stop Logs, Trash Racks & Embedded Parts. Typically gates, stop logs, trash racks & embedded parts are used in the flow of water going through the intake or spillway ...
-
Manufactured by aemcobased in CANADA
Monorail or Crane : The draft tube overhead handling equipment can be of a wide range of capacity depending on the year of construction of the power house and also depending if gates or stop logs are used as draft tube opening and closing doors. The draft tube overhead handling equipment can be required in an overhead crane configuration if it operates inside the power house or in a monorail or ...
-
Manufactured by aemcobased in CANADA
COH specializes in the design, fabrication and installation of Gantries and Monorails for Stop Logs and Spillway Gates.Gantries and Monorails for Stop Logs are typically used for the handling of stop logs serving for protection against water flow upstream of gates. Gantries and Monorails for Stop Logs can also be used as draft tube protection. Stop log gantries or monorails service a whole ...
-
Manufactured by GEI Works, LLCbased in USA
Trashmesh Boom, also known as trashmesh log boom, to control floatable debris as water pollution prevention. Used to control Styrofoam pollution and debris in lakes, rivers, spillways, and reservoirs. Made from galvanized or stainless steel. ...
-
Manufactured by Dam-It Dams, Inc.based in USA
When is a water control structure necessary? Regardless of type, the major purpose of these water control structures is to control the flow of water. Today’s temporary water structures are used either to redirect the flow of heavy waters, to hold back flood waters, and also to providing a dry environment for working on a short-term project. Through Dewatering, Diversion and/or Damming, any ...
-
Manufactured by Dam-It Dams, Inc.based in USA
From prehistoric beaver dams to modern cofferdams, temporary water barriers have provided the means to contain waterways and/or control their flow and direction. For the beaver, they also were ...
-
Manufactured by Salherbased in SPAIN
Among the Salher accessories for the separation of hydrocarbons, we highlight the spillways manhole and flow regulators CVC-AARC, made of 304 l stainless steel, with ring and washers in bronze and seat in PEHD. The flow regulator is installed at the outlet of the inlet manhole, that can be provided also by Salher. The water is stored in the manhole used as a stormwater tank, and then evacuated ...
-
Manufactured by Definitive Ecologybased in ITALY
Definitive Ecology’s INFLORDRUM is an internally fed rotary drum screen with connection to the plant pipeline by means of an inlet flange. The drum is installed with a horizontal axis on a base frame and it can be equipped with an optional openable cover for splash-free operation. The drum can be supplied with a self-cleaning wedge wire to optimise solids separation and cleaning, with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you