Stormwater Drainage Equipment For Water And Wastewater Available In New Jersey
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
New SIGMA HD advanced pipe crawler is an extremely reliable, expertly designed steerable pipe inspection robot that is loaded with great features. These units are one of the most advanced and affordable crawlers which can be used to inspect storm water lines, sewer drainage and construction areas, duct work, pipe/gas lines, and industrial sites. This is perfectly suited to use in areas from 150mm ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
Our LANDY closed screw impeller pumps are ideally suited for situations where power consumption is an important issue. This type of impeller is the new generation single channel impeller performing with high efficiency and good non-clogging ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
The Atlantis Flo-Vault® is a structural lightweight modular tank system used to construct underground water storage for various applications. The modular nature of the system allows for the easy construction of tanks of any volume and can be designed to accommodate specific site conditions. Atlantis modular tank systems use surface and underground infiltration techniques, resulting in clean ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Decentralised, Tailor-Made Solutions for Stormwater Infiltration And Retention: GEOdek infiltration boxes store excess stormwater and release it afterwards. Made from Polypropylene, they exhibit exceptional strength and are resistant to all chemicals normally found below ground. GEOdek can be used under sealed surfaces such as streets and parking lots. 7 standard types cover requirements for ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Atlantis ecological channels systems are used to capture and filter water at the source. The clean water can then be transported or dispersed into the ground. Many applications include biological filtration channels. The Atlantis Flo-Channel® is a high flow rate structural modular channel system that provides designers with an effective product to facilitate the deisgn of sustainable urban ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The SMF4 allows users to rapidly identify sources of polluting loads in rivers and rain water sewer systems. This is achieved by utilising an amino acid called tryptohan as a surrogate marker for BOD/COD. With a measurement time of less than 2 seconds it provides instant answers on water quality to enable rapid resolution without waiting for lab ...
-
PremiumManufactured by Environmental Products & Applications, Inc.based in USA
Our Envirotac line of erosion control polymers works great to protect slopes and embankments from Erosion. Envirotac being an acrylic polymer will penetrate the earth soil and upon curing will bond the soil particles together. This will "laminate" the area reducing water and wind penetration keeping soil sediment in place. Unlike mulch applications, it will not sheet off but will stay adhered to ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
BioSTORM Stormwater Treatment System is a Stage II stormwater system that combines litter control screening with sediment separation. It is typically paired with the StormTEE as a means to prevent litter from entering the treatment ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-DRUM Pivoting Drum System is a sediment flushing device designed to remove settled debris from storm water detention tanks, combined sewer overflow (CSO) retention tanks, sanitary sewer overflow (SSO) equalization tanks and reservoir floors, using a single flush. It has been used in CSO and SSO applications and can be used in agricultural and industrial applications to clean any batch ...
-
PremiumManufactured by Atlantis International Corporation Pty Ltd.based in AUSTRALIA
Atlantis Gravel Cell® gravel pavement reinforcement are permeable joint structures that allow water infiltration and form a robust, strong and durable surface, suitable for high traffic areas, driveways and parking ...
-
Manufactured by GEI Works, LLCbased in USA
Need to protect curb inlets from contaminated stormwater? The curb drain silt guard is designed to block sediments commonly found in stormwater runoff, without causing pooling or flooding of ...
-
Manufactured by Crane Pump & Systemsbased in USA
Deming Demersible Solids Handling Non-Clog pumps are used in industrial wastewater applications and have a 4″ spherical solids handling capability to easily pass the solids encountered in most industrial environments. Deming Demersible flows to over 5,700 GPM and heads in excess of 265 feet. Deming Demersible Series is designed for continuous operation and is made with heavy duty materials ...
-
Manufactured by A-Lok Products, Inc.based in USA
The A-LOK STM is a flexible pipe-to-manhole connector designed for the prevention of soil and water infiltration into stormwater sewer systems. This minimizes the chance of pothole formation and sediment build-up in the storm system, saving states and municipalities money over the life of the structure. It can be used with round, elliptical and arch shaped pipes for curved and flat wall ...
-
Manufactured by Applied Polymer Systems, Inc. (APS)based in USA
APS 700 Series Floc Logs are a group of semi-hydrated anionic polyacrylamide blended logs that when placed in the flow of turbid water remove fine particles and reduce turbidity, metals and inanimate nutrient values. Each Floc Log is formulated for the soil and water chemistry of the specific site where the placement and usage are intended. Contact Applied Polymer Systems, Inc. or your local ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
With the increased use of storm water retention tanks, the need arises to routinely clean the tanks. Regular cleaning maintains combined sewer overflow (CSO) capacity and prevents septicity and odor problems associated with stagnant effluent. PWTech™ Tipping Buckets provide a simple yet robust solution for flushing retention tanks. Tipping Buckets can be used to clean rectangular storm ...
-
Manufactured by Advanced Pavement Technologybased in USA
Advanced Pavement Technology presents a pedestrian-friendly, but vehicular tolerable stormwater management system featuring Aqua-Bric permeable pavers. The smooth, flat surface created using Aqua-Bric meets ADA standards and is a superior choice for areas with high foot traffi c – even for pedestrians in high heels or wheel chairs. Ideal for roadways, parking lots, plazas and walkways, ...
-
Manufactured by GEI Works, LLCbased in USA
This unique storm drain cover is designed with two layers of polyurethane that are capable of resisting oil, chemicals, pollutants and more. In between these layers is a reinforcing mesh that adds to its strength and prevents ...
-
Manufactured by Advanced Pavement Technologybased in USA
Advanced Pavement Technology presents Aqua-Bricloc — a versatile new shape in permeable pavers used when implementing the Bio-Aquifer Storm System (BASS), a superior paving solution that supports stormwater management and business growth. This paver meets ADA standards for opening size, but it is also designed to handle extremely heavy traffi c loads (similar to port applications or ...
-
Manufactured by EJ Group, Inc.based in USA
Infrastructure Access Solutions designed to withstand the most intense traffic ...
-
Manufactured by Zhejiang Fengyuan Pump Industry Co., Ltdbased in CHINA
B pump incorporates a channel impeller developed exclusively for sewage pumps. The impeller has a wide channel extending from inlet to exit, which prevents internal clogging by solids sucked in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you