Stormwater Management Equipment For Water And Wastewater In Ireland
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell and free configurable measurement range via ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Electrodes with integrated evaluation electronics for conductive level detection and ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
Our LANDY closed screw impeller pumps are ideally suited for situations where power consumption is an important issue. This type of impeller is the new generation single channel impeller performing with high efficiency and good non-clogging ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Prosonic FMU90 separated version with field housing or top hat rail housing for control cabinet instrumentation are suited for continuous, non-contact level measurement of fluids, pastes, sludge and powdery to coarse bulk solids. Also the flow measurement in open channels and weirs is possible as the simultaneous measurement of level and flow in a storm water overflow basin with only 1 sensor. Up ...
-
based in IRELAND
Microgravity surveying involves the measurement of the Earth"s Gravitational Field on the earth’s surface. Density variations of the underlying geology will result in variations of the recorded microgravity readings. These density variations may be caused by features such as air, water or sediment filled cavities, or changes in the nature of the subsurface material and bedrock or in the ...
-
Manufactured by Butler Manufacturing Services Ltd. (BMS)based in IRELAND
The BMS Ecostorm Defender is a hydrodynamic vortex seperator system designed to seperate grit/floating pollutants, oil, debris and contaminated settling solids from Stormwater. The Ecostorm Defender is usually used up stream of attenuation/holding ponds as a means of pollutant removal & is excellent value versus similar other ...
-
Manufactured by Geoline Ltdbased in IRELAND
Due to increased activity in the building sector over the last decade or so, Local Authorities have laid down strict guidelines for developers, who wish to construct new projects on existing non-developed land. No longer can collected stormwater be discharged openly into the existing drainage ...
-
by Ward & Burkebased in IRELAND
Response Group manufactures Tipping Buckets suitable for a range of applications in the treatment of municipal wastewater and industrial effluent. The Tipping Bucket system provides an economic and efficient flushing system for stormwater, primary and secondary settlement tanks. The system can also be adapted to flush large diameter sewers designed to provide storage capacity. The Tipping Bucket ...
-
Manufactured by Geoline Ltdbased in IRELAND
Use water to control flooding with the Water-Filled Flood Barrier. Whether protecting buildings from floodwater or directing flowing water back to storage areas, the flexible water-filled barrier is sturdy and efficient. These portable barriers are quick to install, can hold back floodwaters up to 1.90m high, and can be stacked on pallets for the ...
-
Manufactured by JFC Manufacturing Co Ltdbased in IRELAND
JFC CorriPipe is a twinwall drainage pipe manufactured from recycled HDPE. Utilising a twin extrusion process, the two layers are simultaneously extruded one inside the other and heat welded together in one continuous ...
-
by Ward & Burkebased in IRELAND
Response Group manufacture and install a range of Packaged Wastewater and Stormwater Pumping Stations. These stations incorporate submersible pump sets and are installed in precast concrete water-retaining structures with preformed sumps and pump stools. The main components are assembled under controlled factory conditions, are easily transportable and require only simple assembly on site. ...
-
Manufactured by ROMAG aquacare agbased in SWITZERLAND
Such pictures are a thing of the past thanks to the use of the ROMAG high-performance CSO screen ...
-
Manufactured by JFC Civilsbased in IRELAND
The HydroSeal is a rotationally moulded flanged coupler designed to create a watertight seal when JFC CorriPipe™ passes through an impermeable liner (or GCL layer) commonly found in Stormwater Attenuation Systems. The unit comprises two identical flanged couplers one of which has a pre-fabricated internal neoprene layer. It is very easy to install. One half is placed either side of where ...
-
Manufactured by JFC Manufacturing Co Ltdbased in IRELAND
JFC has further expanded its range of CorriPipe products with the introduction of 750mm, 900mm and 1050mm sizes. These sizes are manufactured using the most advanced extrusion and polymer processing technology available. This technology is coupled with cutting edge materials to provide the ultimate large diameter surface and stormwater drainage ...
-
Manufactured by Electrical & Pump Services Ltd (EPS)based in IRELAND
Wide range of tank sizes to meet any project requirement. Choice of interior partitions, e.g. with by-pass ducts/weirs, pressure release valves, both load bearing and non load bearing. Choice of access shafts - standard or customised, whether circular, square or rectangular to your height ...
-
Manufactured by Shay Murtagh Precast Ltd.based in IRELAND
A Precast Concrete Box Culvert, an easily-installed conduit used to enclose small roads, pathways or flowing water (e.g. streams, stormwater or drains) passing beneath roads, railways or embankments. Shay Murtagh Precast is one of the largest producers of precast concrete box culverts in the UK and Ireland. With our modern and mechanised box culvert production facilities, we can produce over 60 ...
-
Manufactured by JFC Civilsbased in IRELAND
JFC design a range of catchpits/ silt traps to separate silt and other particles. This improves the quality of water before it is reintroduced back into the drainage system. As each individual SuDS system is different, they are individually fabricated to take into account water flow rates and ground conditions that differ from site to site. JFC catchpits have been widely and successfully used for ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Saves, visualizes, analyzes and communicates. The Advanced Data Manager is a flexible and powerful system for organizing process values. Thanks to its intuitive operation, the Memograph M adapts quickly and easily to every application. The measured process values are clearly presented on the display and logged safely, limits are monitored and analyzed. Via common communication protocols, the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you