Only show results in Massachusetts? Ok

Stormwater pipe equipment for Water and Wastewater

  • Premium

    StormTank - Model Shield - Low-Cost Stormwater Pre-treatment Solutions

    To complement our stormwater management products, our StormTank Shield offers a smart and simple solution for stormwater treatment. It reduces water pollution from the system by blocking both floatable and oil discharge from exiting the outlet pipe.

    By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA). from Stormwater Management Product line

  • Premium

    KEG - Mini Chain Cutter

    Easily Configured for Multiple Jobs. Use with .5”, .75” High Pressure Swivel. Product Includes: Carrying Case, .Mini Chain, Cutter, 75” HP Swivel, Leader Hose**, and Owner’s Manual. Clean with Soap and Water.

    By KEG Technologies, Inc. based in Spartanburg, SOUTH CAROLINA (USA). from Chain Cutter for Pipe Cleaning Product line

  • Premium

    KEG - Aluminum Vs Stainless Steel Nozzles

    These nozzles are the same, except for the materials that are used to make them. The use of either nozzle, as long as they are centered within the pipe, will produce more effective results. If the nozzle is not centered, we will not be able to ensure maximum performance and premature wear. Aluminum nozzles must be run on skids; if not, the ...

    By KEG Technologies, Inc. based in Spartanburg, SOUTH CAROLINA (USA). from Pipe Cleaning Nozzle Product line

  • Premium

    KEG - Model 6/8 - Wire Proofer Skids

    The Wire Proofer skids are designed to allow the water jets to stream between the steel rails within the piping system. These skids are designed to work within sanitary or stormwater pipes that aid in centering the nozzle within the pipe. This skid increases the power of the nozzle by as much as thirty percent.

    By KEG Technologies, Inc. based in Spartanburg, SOUTH CAROLINA (USA). from Pipe Cleaning Accessories Product line

  • Premium

    Clara Filter - High-Flow, High-Load Stormwater Filtration

    Is your industrial facility close to the benchmarks?  Do you want an added measure of certainty to be in compliance with your industrial general stormwater permit?  Is your industrial facility unpaved or does it have broken pavement that is affecting your stormwater quality?  Does your permit require corrective actions?  Or is ...

    By Newterra based in Brockville, ONTARIO (CANADA).

  • MYCELX - Stormwater Filtration System

    This device was designed to be installed in parking lot drainage basins. The unit works in conjunction with an easy to assemble gutter system that works to catch the “first flush” of rain water off the parking lot which contains the highest concentrations of hydrocarbon pollutants. The effluent will be clear of sheen, oil, gasoline, ...

    By Centek Industries Inc. based in Thomasville, GEORGIA (US) (USA). from Environmental Products Product line

  • MuriPipe - Swale Infiltration Pipe

    Swale infiltration pipe with large percolation area: Totally perforated polyethylene (PE) pipe (TP, type R2) according to DIN 4262-1 and DIN 19666, nominal diameter DN/ID 200 or 300, in structured-wall design (corrugated outside, smooth inside), with circumferentially arranged percolation openings, with a proven maximum total percolation area ...

    By FRÄNKISCHE Rohrwerke Gebr. Kirchner GmbH & Co. KG based in Königsberg, GERMANY. from Drainage Systems Product line

  • HDPE Corrugated Pipe

    HDPE Corrugated Pipe producing with HDPE raw material as HDPE Double Wall Corrugated Pipe and used in sewerage projects in industrial waste transport, in storm water drainage and in transport of the drainage waters. HDPE Corrugated Pipes are produced as SN 2, SN 4, SN 6 and SN 8. Corrugated Pipes outer surface of the corrugated and the smooth ...

    By Zeep Construction Co based in Söğütözü, TURKEY.

  • Cosmic - Sewer Rehabilitation and Renovation System

    Cosmic provides a complete system for non disruptive, punctual sewer rehabilitation or sewer renovation and robot technique. The operation area involves a Storm water sewer and drain, oil- and gaspipelines, chemical tubing, aerating pipes, etc. The system is able to inspect, analyse, document, mill, clean and repair damaged sewer pipes and ...

    By Cosmic Engineering GmbH based in Kasten, AUSTRIA. from Others Product line

  • In-Ground Oil Interceptors

    Applications: Oily wastes and rainwater run-off streams at power stations, rail yards, maintenance depots, transport depots, industrial sites, waste treatment facilities, oil storage sites and onshore bilge and ballast treatment. In fact, any place where free oil contamination is a problem. The units may used as pre-treatment to further processes ...

    By Stetfield Separators Ltd. based in Penryn, UNITED KINGDOM.

  • Armtec - Ultra Flo Steel Pipe

    Armtec Ultra Flo is a storm sewer pipe with a unique external rib corrugation that provides a significant improvement in hydraulic performance over traditional corrugated steel pipe, reducing the Manning’s value to 0.013.

    By Armtec based in Concord, ONTARIO (CANADA). from Drainage Solutions And Water Treatment Product line

  • Model Z-LOK STM - Boot Style Connector

    The Z-LOK STM Connector was designed to address the need for a boot style connector for large diameter pipe, making it ideally suited for stormwater application. Available for 6'-102' pipes. A watertight connection is produced by tightening the Redi-LOK Clamp to the specified torque value. The Z-LOK STM Connector is manufactured to meet or exceed ...

    By A-Lok Products, Inc. based in Tullytown, PENNSYLVANIA (USA). from Boot Connectors Product line

  • KanaPipe - Flyer Pipe

    KanaPipe is extremely suitable for all storm water drainage projects, including residential, commercial or DOT projects. KanaPipe has superior pipe stiffness up to 200% greater than ordinary corrugated HOPE pipe products.

    By Kanaflex Corporation Co.,ltd. based in Vernon Hills, ILLINOIS (USA). from Pipe Product line

  • Model 3-W - Floline Triple Wall Profiled HDPE Pipe

    The FLOLINE 3-W pipe is ideal for underground or aboveground gravity and low-pressure applications in the civil works, drainage, wastewater management and agriculture sectors. Superior in quality and performance compared to the common single or double-walled HDPE pipes available in the market today. The triple wall construction provides the pipe ...

    By Weida (M) Bhd based in Kuching, MALAYSIA. from Water Distribution Product line

  • FRANK PKS - Profile sewer system

    PKS pipes are manufactured of PE and PP acc. to DIN 16961 and draft DIN EN 13476. That way the most important demand to sewer pipes, manholes and storm water tanks, even a durable tight system can be guaranteed.

    By FRANK GMBH based in Mörfelden-Walldorf, GERMANY. from Sewage And Environmental Technolgy Product line

  • Oldcastle Precast - Manholes

    Manholes are hollow concrete tubes that are installed vertically below grade and are lidded with a round cast iron lid at street level.  They are placed at vault openings or pipe junctions and provide maintenance and inspection access to underground piping systems. Oldcastle Precast manufactures a variety of manholes with various coatings and ...

    By Oldcastle Precast Inc. based in Tucker, GEORGIA (US) (USA). from Stormwater Product line

  • Model N-12 - ST IB - Soiltight Pipe

    Available in diameters from 4' to 60', N-12 pipe is replacing reinforced concrete pipe as a preferred product for storm water applications. The reinforced polyethylene bell of N-12 ST IB pipe minimizes distortion. Chipping and cracking common to concrete pipe bells, is eliminated.

    By Advanced Drainage Systems, Inc. (ADS) based in Hillard, OHIO (USA). from Pipe Product line

  • IPEX - PVC Solvent Weld Sewer Pipe and Fittings

    A complete line of solid and perforated PVC solvent weld sewer pipe and fittings for building drainage and sewer applications.

    By IPEX, Inc. based in Verdun, QUEBEC (CANADA). from Plumbing & Mechanical - DWV Systems Product line

  • Chemtex - Model CON2010 - Inflatable Pipe Plugs

    Multi-size pipe plugs reinforced with Kevlar® have a wide application range. Plugs are made from a high-quality Neoprene rubber that will stand up to hydrocarbons. Each plug covers several pipe sizes. Multi-size ranges overlap for more user selectivity. For pipes from 8' diameter to 24' diameter. These sizes work on most municipal storm drains ...

    By Chemtex, Inc. based in Cumberland, RHODE ISLAND (USA). from Stormwater Management - Inflatable Pipe Plugs Product line

  • Chemtex - Model CON2013 - Single Fitting Controller, 36 Psi

    Multi-size pipe plugs reinforced with Kevlar® have a wide application range. Plugs are made from a high-quality Neoprene rubber that will stand up to hydrocarbons. Each plug covers several pipe sizes. Multi-size ranges overlap for more user selectivity. For pipes from 8' diameter to 24' diameter. These sizes work on most municipal storm drains ...

    By Chemtex, Inc. based in Cumberland, RHODE ISLAND (USA). from Stormwater Management - Inflatable Pipe Plugs Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you