Strainers Equipment For Water And Wastewater In Alaska
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Our FRP Division designs and manufactures various types of FRP simplex, duplex, automatic scraper, and backflush filters for various industries. We provide complete skids with piping, valves, and instrumentation along with PLC control if required by clients. With our vast experience in fabrication since 1988, we perform several fabrication activities in-house as well as ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACRS L-Series Automatic Scraper Strainers are custom built to your specifications. Available in various sizes and materials with a helical scraper or linear blade and brush design, these units are the ideal choice to replace existing backwash strainers that are not performing properly. We have designs to replace RP Adams, SP Kinney, Hayward/Eaton 596 and 2596, Tate Andale, and most other vessels ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Backwash Strainer has been designed to remove solids from 25mm in size down to 30-micron particles. The general literature piece describes the various connection options available as well as the advantages of the Acme backwash arm design over that of competing manufacturers. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Basket strainer consists of a removable screen that can easily be removed from the top. Basket Strainers are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainers temporarily disrupt?a?system?when cleaning is ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Y type Strainer is the most cost effective, Y strainer uses perforated wire mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system Strainers are low-cost solutions to large nominal bore straining ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Conical temporary strainers provide a cost-effective solution for protecting downstream equipment from sediment and debris during pipeline start-ups and commissioning. Available in a wide variety of sizes, materials, and configurations to meet your specific needs. Designed for easy installation between piping flanges. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for distribution friction losses. The PFC valve will deliver ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-C and 206-PR-C pressure reducing and check valves are based on the 106-PG or 206-PG main control valve. The pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer model 106-F-Type 4 modulating float valves are based on the 106-PG main valve. They are ideal for balancing the inflow and outflow demand into the storage tank and maintaining level at the designated maximum. The valve closes drip-tight at the maximum level and modulates to maintain the tank level. The float pilot is remotely installed at the high level in the storage tank. Pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 2 altitude control valves are based on the 106-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two-position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the storage tank to the maximum level and then closes drip-tight at the set-point. It opens to refill the tank once the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is ...
-
Manufactured by Vac-Con, Inc.based in USA
The X-Cavator is designed specifically for the job and can handle the toughest and most challenging excavating jobs. Based on our combo machines, the X-Cavator is powerful, durable and easy to operate. And like any Vac-Con machine it is fully loaded with standard features and the industry's best safety ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer model 106-F-Type 4 and 206-F-Type 4 modulating float valves are based on the 106-PG or 206-PG main valve.They are ideal for balancing the inflow and outflow demand into the reservoir and maintaining level at the designated ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 3 and 206-A-Type 3 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining preset maximum level. The Type 3 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. The valve opens to permit reverse flow through the valve when the supply pressure drops an adjustable amount below the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. When shut-down is required the pilot solenoid on the valve is de-energized to commence closing. The pump is kept ...
-
Manufactured by Mueller Water Productsbased in CANADA
There are two versions of the standard AISI 316 stainless steel strainer with 40 mesh stainless steel screens. The standard strainer J0098B has a 3/8 in / 9.5 mm blowdown/maintenance port for access to the screen and the 3/8 in / 10 mm NPT inlet and outlet connections. The J0097B strainer provides a standard 1/4 in / 6.35 mm sensing / gauge ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-8702A, which is ULC labelled and listed, is ideal for automatically reducing a higher inlet pressure to a steady lower discharge pressure, regardless of fluctuations in flow or inlet pressure. The valves are based on the 106-PG or A106PG control valves and are available in a complete range of sizes from 1 in / 25 mm to 8 in / 200 mm. In typical pressure reducing applications, the globe ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be extended as pressures will continue to be controlled even in the event of failure with ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high pressure pilot acts as a standard relief pilot, opening on excessive pressure. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you