Submersible Mixers Equipment For Water And Wastewater Available In St. Helena
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
LANDY mixers are designed to keep sumps that are highly contaminated with solids and fibres in suspension. The mixers are renowed for their outstanding mixing capacity thus ideally suited for industrial mixing and suspension ...
-
Manufactured by Antico Olindo e Cesare srlbased in ITALY
Special electro-agitators to blend mineral products in storage tanks such as crude oil and its derivates as fuels and diesel oils. Specifically designed for the refinery blending and storage tanks; widely used now for biological products coming from seed plants. Characterised by the possibility of replacing the mechanical seal with very quick maintenance operations, without either removing the ...
-
Manufactured by Gasser Apparatebaubased in SWITZERLAND
The development and production of special workplaces for the highest demands according to the needs of our customers are one of our strengths. The sample receiving table is an example of how such a workplace can be ...
-
Manufactured by Emiflex S.p.A.based in ITALY
Tube: austenitic stainless steel. Male: stainless steel AISI 303, thread UNI EN 10226-1. Rod holder: AISI 303 stainless steel with flat sealing seat. Nut: nickel-plated CW619N brass, with UNI ISO 228/1 thread. Protective sheath: white fire retardant shrink-weld polyolefi. Treatment: solubilized after welding the terminals. Important: even in the condition of minimum bending radius, the internal ...
-
Manufactured by Fusion Fluid Equipment, LLCbased in USA
Developed as a strategic partnership between Nord Gear and Fusion Fluid Equipment, this series is designed to provide a more robust right angle design at an economical price point than traditional worm gears. With a 2 stage helical/bevel gear set, many more years of service life is possible. This series is a great option for smaller bio-reactors and fermenters that require a quality made ...
-
Manufactured by DeTech Pumps Co. Ltd.based in CHINA
When mixing and horizontal flow is essential for biological wastewater treatment processes, The low-speed mixers deliver outstanding cost-saving performance for applications that involve gentle mixing of large fluid volumes. ...
-
Manufactured by Fuchs Enprotec GmbH - a subsidiary of the METAWATER Groupbased in GERMANY
The directly driven FUCHS submersible TURBOSTAR Mixer TS-SUB is applied in storm water tanks, where it swirls up settled solids. In equalization basins, activated sludge basins and small sludge storage tanks it provides for proper mixing and circulation. The high-performance machine is simply designed and very sturdy. The special design of the propeller provides for high resistance against ...
-
Manufactured by AAT Abwasser- und Abfalltechnik GmbHbased in AUSTRIA
The AAT submersible mixer is used to mix fluids and sludge in basins and tanks. The directly driven submersible mixers with three-wing propellers ensure optimised mixing of the tank contents. Additionaly, a heigh adjustment is used to mix up floating and suspended layers. On account of the construction for permanent submersed operation, the mixers have an especially long life. The execution for ...
-
Manufactured by Fenno Water Ltd Oybased in FINLAND
We manufacture different kinds of blade mixers. These mixers are used for quick mixing and also for slow mixing. The mixing capacity can be adjusted by changing the mixer blade width and length, adjusting the blade angle or adjusting the rotational speed of the mixer. Blade mixers are also delivered with blades installed at various heights. Two or three blades can be installed on one body ...
-
Manufactured by Veenstra Technologybased in NETHERLANDS
Optimize your ink or paint mixing processes with our Dissolvers. Veenstra Technology has been active for many years in the field of top-entry, side-entry, bottom-entry mixers, column mixers and dissolvers. We have installed custom mixers and dissolvers for a wide variety of customers. Our mixers are applied by domestic companies as well as companies abroad and international companies. We are ...
-
Manufactured by Wuxi Dajiang Environmental Technology Co., Ltd.based in CHINA
This device is an automatic and continuous powder dispensing and dosing system.The dry powder enters the premix and water from the screw at the bottom of the hopper for premix, and the wet material enters the mixing tank for dilution and mixing, and is prepared according to the concentration required by the user. The preparation solution goes from the preparation tank to the curing tank and then ...
-
Manufactured by Shanghai VOR Separation Technology Co.,Ltdbased in CHINA
Our engineers have worked on applications of submersible mixer, low-speed flow propeller and hyperboloid mixer in water and wastewater treatment for more than 20 years, VOR can provide service of project design, individual equipment, installation kits, and spare ...
-
Manufactured by Wilo USA LLCbased in USA
Slow-running submersible mixer with two-stage planetary gear. Flexible installation. 2-stage planetary gear for adjusting the propeller speed. Self-cleaning propeller. Propeller blades can be replaced individually. Easy-to-install blades and hub. ATEX and FM ...
-
Manufactured by Gasion Airtec Pvt. Ltdbased in INDIA
Nano bubbles produced by Turboxy are ultra-fine and nearly invisible to theeye; in fact, at less than 1 micrometer, they are about 400 times smaller in diameter than human hair and 1 million times smaller than ordinary lake and pond aeration bubbles. As a result of their size, Nano bubbles have no natural ...
-
Manufactured by Benenv - Jiangsu Benenv Environmental Protection Co., Ltdbased in CHINA
Air Flotation Principle:HTJY is a new-design automatic contionus allocation and dosing system, which is used for adding PAM (polyacrylamide). The whole process is integrated. Considering the operation, we set the last step of the dosing operation to manual dto avoid damage of the metering pump. The automatic dosing machine is widely used in the waste water treatment, it can mix the compounds ...
-
based in THAILAND
Wastewaters from the food and beverage industry, the pulp & paper industry and the chemical industry are highly loaded with organic pollutants and can be treated advantageously by means of anaerobic ...
-
Manufactured by Ixom Watercarebased in USA
Air-powered. No moving parts in the tank. Can run dry. Easy to deploy. Fits through 12" diameter opening. Power System: Continuous operation compressor on single-phase AC power feeding 1/2" air-hose to the mixing unit. Higher pressure configuration available. Construction: T316 stainless steel shell and hardware. UHMW-PE end plates for worry-free safe contact with all tank surfaces. Optional ...
-
Manufactured by Westfall Manufacturing Companybased in USA
An affordable solution for increasing potable water capacity. Westfall’s Open Channel Static Mixer 4000 is a simple and inexpensive choice. It can be used to chlorinate water without having to construct additional pipeline installations or add mixing gear boxes or propellers. It can be installed in tanks up to 20’ wide and 20’ deep, or in open water flows like irrigation and ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
Chemineer's sanitary mixers offer a variety of design configurations, materials and options needed to meet critical sanitary mixing applications and ensure the highest level of sanitary mixing. Chemineer also offers a wide variety of precision-engineered, high-performance impeller ...
-
Manufactured by Ixom Watercarebased in USA
Floating, AC powered, circulation equipment for wastewater treatment and freshwater applications. Continuous operation on single-phase AC ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you