Environmental Industry Equipment In Singapore
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
The tasks of a laboratory are as numerous and different as the requirements for a zero and processing gas ...
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
ShowcaseManufactured by OSEI - Oil Spill Eater International, Corpbased in USA
Oil Spill Eater II (OSE II) is the world’s most environmentally safe and cost effective bioremediation process for the mitigation of hazardous waste, spills and contamination virtually anywhere of any size, large or ...
-
ShowcaseManufactured by Eureka Water Probesbased in USA
The MantaPlus 25 comes standard with temperature, pH, conductivity, and a wipered turbidity sensor, and optional ORP and depth sensors. The M+25 features our refillable pH reference, which requires no expensive consumables. Connect the MantaPlus 25 to any of our field display options for sampling in the field, or add a battery pack for autonomous deployments. Connect to a telemetry station for ...
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact® 920 system uses reel-to-reel filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor aqueous samples for user-selected ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 98.5%. The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications. It can be also used for the evaporation of solvents in samples ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Best performance at the highest safety. If you want to reach the best performance in industrial distillation and ensure the highest user safety, your solution is the Rotavapor R-250 Pro. Benefit from optimized distillation rate, intuitive operation, and exceptional product ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Economical vacuum source. The Vacuum Pump V-100 is a chemical-resistant and economical vacuum source with a space-saving design. It covers the essential needs of the membrane vacuum ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Fitting to your needs and environment. Perform any flash or prep HPLC application easily and safely with our extremely compact Pure Chromatography Systems. The Pure platform is fitting to your needs and environment and offers maximal user and sample safety, while using minimal ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Polyester Filter Bag to Outlet ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The safe way to handle organic solvents with the Mini Spray Dryer S-300. The safe way to spray dry organic solvents is to use the Inert Loop S-395 as the ideal accessory for your Mini Spray Dryer S-300. Its innovative design makes spray drying of organic solvents more environmentally friendly, cost-efficient and ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
When a purification has to be scaled up, GlasPure offers maximum flexibility in terms of scale and separation requirements. The glass columns are designed for sample amounts over 300 g and pressure up to 50 bar (725 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you