Surface Aeration Equipment For Water And Wastewater Available In Nebraska
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank® are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical strength. It consists of injecting a reactive ...
-
PremiumManufactured by Reliant Water Technologiesbased in USA
Recreational ponds, wastewater lagoons, fish grow-out ponds and small, shallow lakes have always exhibited the problem of organic matter collecting on the bottom and eventually becoming polluted. Wastewater lagoons are especially fraught with problems because their purpose is to clean the wastewater to the point that it can be released back into the environment. Over the years many different ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In the field of surface aeration Landustrie has a long history and broad experience. Landustrie designs, manufactures, supplies, installs and maintains many types of aeration systems, with either surface aerators, aeration rotors, diffusers and Landox flow boosters. Since the introduction of our own full-scale aeration test tank and the availibility of substantial process know-how, Landustrie is ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
For simple and efficient aeration in municipal and industrial wastewater treatment plants Landustrie supplies two standard aeration rotors: Landy 700 and Landy 1000 resp. with aeration capacities of 54 kgO 2/h and 85 kgO2/h with maximum rotor lengths of 9 m. At special request of our clients these rotors can be supplied with other dimensions as well. Also brush aerators with floating construction ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration ...
-
PremiumManufactured by Reliant Water Technologiesbased in USA
The Reliant Lagoon Commander Pond/Lagoon Mixer continuously, and slowly, moves water along the bottom of a lagoon/pond, continually mixing the entire water column using a minimum of energy. When compared to standard surface aerators or directional mixers, the Lagoon Commander is more efficient, less costly to operate, and requires minimal ...
-
Manufactured by Mooers Products, Inc.based in USA
The Flexcap Diffuser is a proven, maintenance-free, non-clogging coarse bubble diffuser. It was designed for long life and reliable performance. It is the first diffuser engineered for extended life without plugging, without blow-off, without maintenance. The Flexcap Diffuser can replace any diaphragm diffuser you are using. It meets all the requirements for aeration in municipal, commercial, ...
-
Manufactured by Mooers Products, Inc.based in USA
Aeration is used extensively for the biological (biochemical?) oxidation of both domestic and industrial organic wastes. In wastewater treatment, the function of aeration is to introduce air into the water through the most effective and least costly methods that will increase oxygen transfer (dissolved oxygen) in the ...
-
Manufactured by Mazzei Injector Company, LLCbased in USA
Mazzei technology makes the treatment of wastewater basins easier, more efficient and quieter. Using either Mazzei’s patented AirJection® Wastewater Aeration Technology or as a pure oxygen system, wastewater is pumped through one or more high efficiency Mazzei® Venturi injectors, forcing ambient air or concentrated oxygen to aspirate into the wastewater. The resulting gas-water ...
-
Manufactured by Airmaster Aerator, L.L.C.based in USA
The Water Cannon aerator is Airmaster's standard high-efficiency, 50 Hp magnum floating/surface aerator (which can pump up to 12.5 million gallons of water per day) has been upgraded with the addition of the new rotating water cannon. In operation, the Water Cannon (which is powered by a separate 7.5 II.P. grinder pump) rotates 360 degrees in 1 minute 35 seconds, spraying out over 100 gallons of ...
-
Manufactured by H2O Logics Inc.based in CANADA
Other aerators may look similar, but the resemblance stops there! Environmental Equipment Engineering (EEE) strives to make their Floating Aerators the best in terms of efficiency, performance, and durability. These heavy-duty wastewater floating aerators are made in the USA and EEE has 45 years of experience in the hand lay-up method of fiberglass modeling and manufacturing. EEE’s range of ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
The efficiency of biological treatment plants depends considerably on the quality and suitability of the aerator used. The major factors to be considered in the selection of aerators are the basin dimensions, the required amount of oxygen and mixing. We guarantee the efficiency of our aerators in all aspects on account of sound evaluations of our numerous applications of this ...
-
Manufactured by Aerzen International Rental B.V.based in NETHERLANDS
Products in this range are mostly used for pneumatic conveying of bulk materials, surface or wastewater aeration, oxidation or combustion processes and neutral gas conveying. The rental equipment in this group consists of two technologies: ‘positive displacement blowers’ and ‘rotary lobe compressors’. The positive displacement blower matches the counterpressure of the ...
-
Manufactured by Sanitaire - a Xylem brandbased in USA
Industry-leading, positively-controlled decanter utilizes an electromechanical actuator and variable frequency drive (VFD) to enable multiple control strategies and precise effluent control flexibility. Floating decanters do not offer this capability. Rugged, corrosion resistant stainless steel design for long life with minimal maintenance. Decants from the top down, with visible effluent quality ...
-
Manufactured by Newterra, Ltd.based in CANADA
Performance like the Aire-O2 Aspirator Aerator. Designed for a tight budget: The Aire-O2 Series 275 Aspirator Aerator offers high quality materials with the same engineering integrity as the Aire-O2 Aspirator Aerator at a reduced price. Ideal for retrofits, upgrades, and supplemental aeration; this high quality, minimal maintenance aspirator is the simply installed solution for nearly any ...
-
Manufactured by KIK Kunststofftechnikbased in GERMANY
Fluidizing with PE-porös: Many dry bulk materials can be put into a fluid-like state by “fluidization”, in other words, passing air through them. This mobile state can be used for homogenizing or mixing, discharging or flow-conveying, drying or cooling, fluidized-bed sintering of powdered ...
-
Manufactured by KAMPS s.a.based in BELGIUM
For more than 25 years now, KAMPS has produced and installed several brush aerators. This type of aerator is the ideal solution to aerate, mix and circulate waste water in low depth tanks and little oxidation ditches. KAMPS offers two different solutions in terms of diameter, 1m and 0.75m in order to be able to adapt the system to every project. Afterwise, the length and submergence are crucial ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Floating retrieval lines enable the self-contained assemblies to be craned out for inspection and maintenance. Dedicated supply lines and ballasts are built right into the assemblies, as is the pipe on which diffusers are directly ...
-
Manufactured by Philadelphia Mixing Solutions, Ltdbased in USA
The Raptor floating directional mixer and subsurface aerator provides superior aeration and solids suspension in larger lagoons and basins. Featuring a patented, circular rake impeller technology, the Raptor produces a focused, turbulent mix over 300 feet long. Equipped with a 4 horsepower/2.9 kilowatt blower, the Raptor injects air in front of the impeller which disperses fine bubbles that ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you