Surface Water Equipment For Water And Wastewater In Connecticut
-
Manufactured by Aqualogic Inc.based in USA
New Regulations Impact Industry The U.S. metal finishing industry is under a virtual mandate to minimize or eliminate discharges of wastewater to sewers and surface waters. The growing body of industrial experience has demonstrated that the most effective 0-discharge programs meet the following criteria: Recover process solutions and rinse water for reuse wherever possible. Purify and Recycle the ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
SLURP (Self-Leveling Unit for Removing Pollution) is a self-adjusting, floating weir-type oil skimmer, originally developed by Esso Research Centre, Abingdon, England. Used worldwide for over twenty years to remove oil and other floating pollutants from the surface of protected waters, SLURP is one of the most versatile skimmers made, working efficiently in any situation at rates up to 44 GPM [10 ...
-
Manufactured by Dexsil Corporationbased in USA
The L2000DX relies on the same basic chemistry as the Clor-N-Oil test kits, however instead of a colorimetric reaction, the L2000DX uses an ion specific electrode to quantify the contamination in the sample. Sample analysis is available for transformer oils, soils, water and surface wipes. The usable measurement range for oils and soils is 2 to 2000 ppm, 20 ppb to 2000 ppm for water and 2 to 2000 ...
-
Manufactured by Applied Felts Inc.based in USA
Designed for the Field Technician in mind! Think of the Rhea as a portable DC 12 volt water pump sampling system that takes the place of a Grab Sampler, a Coliwasa, a Kemmerer Water Sampler, A Betta Water Sampler and a Van Dorn Water Sampler. The Rhea® can pump with its built in peristaltic pump depth to water up to 30 feet and pump to depths up to 200 feet depth to water with the optional 12 ...
-
Manufactured by Guardian Environmental Technologiesbased in USA
PetroGuard-D works instantly to absorb and encapsulate liquid hydrocarbons and petroleum products, turning them into a non-leaching solid. It’s 4:1 absorption capacity and low volumetric increase results in less product to dispose of and saves time during ...
-
Manufactured by Guardian Environmental Technologiesbased in USA
SheenGuard oil sheen removal pillows and blankets are exclusively designed to remain on the surface of the water, removing floating oil sheen and rainbows. These long lasting pillows have a large surface area equal to (6) 5″ conventional booms. They are specially constructed and manufactured to float, prevent sinking, and absorb all traces of oil and sheen. These features result in ...
-
Manufactured by Eljen Corporationbased in USA
Complete customer satisfaction on Prefabricated Drainage Systems is obtained by emphasizing quality, customization, and endurance. First Developed In The 1960’S, Eljen’s Revolutionary No-Aggregate Drainage System Has Proven Itself By Withstanding The Test Of ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The LSC W/MiniBagger is a flexible and cost-efficient way of improving oil spill recovery in harbors, rivers, canals and other shallow or narrow water areas. With the MiniBagger you can collect even diesel from the water with any vessel. The detachable MiniBagger side collectors can be installed to boats as small as 5 meters in length. It is designed to be used with almost any boat where an ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Lamor Side Cassette Oil Recovery System LSC is a vessel mounted advancing skimming system for medium to large size vessels. Its design is based on the proven stiff brush oil recovery technology that offers high performance and safety for offshore oil spill recovery ...
-
Manufactured by Process Measurement & Controls, Inc. (PMC)based in USA
The PMC VersaLine® VL2000-SW Series submersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The ceramic capacitive sensing element provides a rugged, open face design which avoids clogging or sludge build up from the material often encountered in wastewater. Designed specifically for the VL2000 the SW2000 provides a "cage" sink ...
-
Manufactured by Roebic Laboratories, Inc.based in USA
K-57 Septic System Cleaner is a powerful biological product which is formulated with our patented bacterial cultures. K-57 is powerful enough to act quickly in emergency situations where sluggish conditions, clogs, surface water accumulations, or back-ups have occurred.Over the last 50 years, K-57 has 'seen it all' regarding septic system problems and has restored countless systems to useful ...
-
Manufactured by Process Measurement & Controls, Inc. (PMC)based in USA
The PMC VersaLine® VL2000 Seriessubmersible level transmitters are specifically designed for use in wastewater, pump/lift station applications. The ceramic sensing element provides a rugged flush open face design which avoids clogging or sludge build up from the materials often encountered in wastewater. The stainless steel construction will satisfy most applications, but an option of ...
-
Manufactured by Buck Scientific Incbased in USA
The Model 410 Mercury Analyzer incorporates the Hatch & Ott Cold Vapor Technique for the analysis of trace levels of mercury in drinking, surface and saline waters, as well as domestic and industrial wastes. Perfect for EPA Method ...
-
Manufactured by Guardian Environmental Technologiesbased in USA
PetroGuard-D oil spill absorbent for easy clean up will instantly absorb and encapsulate liquid hydrocarbons and petroleum products, turning them into a non-leaching solid. It’s 4:1 absorption capacity and low volumetric increase results in less product to dispose of and saves time during cleanup. Shipping charges within the United States are included in the ...
-
based in USA
Although water covers 70 percent of the Earth"s surface, fresh water scarcity impacts one billion people every day. At GE, we"re committed to developing new technology to bring this essential resource to more people around the ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Lamor In-built Oil Recovery System LORS is a vessel mounted advancing skimming system that is based on Lamor’s proven conveyor chain brush technology. The system is designed for small workboats and tugs (7 – 15 m / 23 – 49 ft) up to medium and big vessels (15 – 85m / 49 – 278 ft) providing the highest possible performance and safety for oil spill recovery ...
-
Manufactured by EthicalChembased in USA
Working in collaboration with Texas A&M, EthicalChem developed MudOut, an innovative, leadership performance, drilling mud filter cake remover that provides uniform breakdown of filter cake. MudOut solubilizes, dissolves, and breaks down organic and inorganic components of filter cake in a single-step, creating water-wet surfaces and generating acidic conditions. MudOut eliminates the need ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Portable Winch A.G.O.'s compact winches are designed to be easily portable and are ideal for light loads such as drop cameras, lightweight CTD profiling systems and line management ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 8050 pCO, Measuring System is an autonomous analytical system for measuring carbon dioxide in oceanic surface water. The system is modeled after instruments previously built by Craig Neill/University of Bergen. The system may be used on a ship underway or, on a variety of at -sea platforms. The present pCO2 system operates fully ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Housing, clear polycarbonate, PVC end stoppers & mounting blocks, Delrin air vent screw & Petcock. Bottles designed for greatly simplified and improved incubation based, biological rate measurements in surface waters. Modified Niskin design includes transparent, crystal clear polycarbonate body (Light transmission 89-90%). Bottles have standard GO mounting hardware for use on all GO ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you