Tank Coatings Equipment For Water And Wastewater Available In Malawi
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoFlex Urethane 381 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. 381 is a chemically resistant lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, including primary/secondary containment structures subject ...
-
PremiumManufactured by Texas Boom Company LLCbased in USA
TBC offers solvent type fabric repair kits for repairing oil containment boom, silt curtains, and pillow ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
It facilitates sludge treatment making sludge dewatering more cost effective and efficient. Toro Equipment’s Sludge Conditioning Tank (TAF) is a vertical cylindrical GRP tank that allows the chemical conditioning of sludge, facilitating filtration or decantation ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoFlex Urethane No. 381.61 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. No. 381.61 is a chemically resistant, lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, including primary/secondary containment ...
-
PremiumManufactured by Shanghai Metash Instruments Co.,Ltd.based in CHINA
MWD-610 series is a new series of microwave digestion system which launched in 2019. It is newly designed and fully upgraded with higher performance and safer protection system. The smart design and perfect performance make it warmly welcomed by users ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
The location of the water tank is extremely important at the point of increasing the efficiency of use and creating a more spacious environment. The techniques and evaluations used in this regard are in accordance with the application principle and should overlap with the project. The underground water tank, which provides durable and trouble-free storage for many years, is one of the best ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Standard Features: With epoxy painted carbon steel tank. Aqualine brand coal-based activated carbon. Maximum working pressure 6 bar. Time-controlled backwash. Butterfly valves with electric actuation (no price difference in case of pheumatic actuation). C-1215 and C-1615 sub-collection structure octopus diffuser. Sub-collection structure between C-2015 and C-2815 mushroom diffuser on mirror. ...
-
Manufactured by Fab-Seal Industrial Liners Incbased in USA
Fab-Seal Industrial Liners, Inc., has spent decades building a reputation as a trusted manufacturer and installer of membrane lining systems and water tank liners for a wide range of industrial uses and applications, including Pit, Pond and Lagoon ...
-
Manufactured by Flexi-Liner Corporationbased in USA
Our custom liners will provide the best fitting option of a brand new tank liner to extend the life of your tanks and ...
-
Manufactured by Witt Lining Systemsbased in USA
At its name implies, HP Koroseal takes standard Koroseal to the next level. With a slightly improved formulation HP Koroseal provides an added temperature range of up to 210OF and provides a longer service life in harsh conditions. Like standard Koroseal, HP Koroseal is recommended for process tanks and storage tanks and in applications where temperature ranges are high or chemical concentrations ...
-
Manufactured by Plasticon Composites GmbHbased in GERMANY
The BS7000 is the flagship saturator, which includes our proven BS series control system. The model is manufactured as two systems, a MINI station which provides 10,000L of gross internal storage and the MAXI station gives a larger 22,000L capacity. A telehandler, auger or silo can used to fill the unit with ...
-
Manufactured by Advanced Structural Technologies, Inc.based in USA
With an extensive history of producing pressure vessels for high pressure and cryogenic applications, AST’s forged and formed, seamless Type 1 vessel liners and type 3 liners are currently used in multiple space ...
-
Manufactured by Witt Lining Systemsbased in USA
Hard chrome plating solutions are very aggressive at the upper and lower solution levels of the tank. As the solution evaporates, the concentration of chrome increases. This concentrated chrome vapor then condensates in the freeboard area and attacks traditional PVC liners. Witt Lining Systems innovated the solution of adding a skirt of either PVC or LFP ...
-
Manufactured by Triflo International Inc.based in USA
This 27 foot long 8 foot wide tank is in stock and is ready to have any set of equipment fit to it. Tri-flo can quickly fit the necessary divider walls, piping and equipment as needed for your application. There are 4′-6″ pump porches on the ends to accommodate a wide range of pump packages. The total capacity is 4,000 gallons. Tri-flo also has the ability to coat this tank any color ...
-
Manufactured by Step Techno Solutions LLPbased in INDIA
STEP fabricate steel tanks with superior quality of raw material. The design is robust in nature and light in weight. The tanks are manufactured in-house fitted with latest welding machinery. The tanks are coated with epoxy paint that gives the tank a longer life in excessive corrosive atmosphere. It is fitted with various accessories includinq inlet and outlet ...
-
Manufactured by Industrial Storage Systems B.V.based in NETHERLANDS
The ISS PVC tensioned roof is a perfect way to cover new and existing tanks. The PVC tensioned roof can be used to cover up round and even square concrete, prefab steel tanks like the glass coated/epoxy coated tanks and the stainless steel tanks. The dimensions from the tensioned roof are from very small 2,5 meters diameter up to the largest diameter of 60 meters, all depending on snow loads, ...
-
Manufactured by Mathieu Part of the Fayat Groupbased in FRANCE
Mathieu is proud to present its brand new 100% electric washer, the 2 eSeries W. Our new 2 eSeries Compact Washer comes with the same cutting-edge battery technology and the same advanced cabin comforts as our 2 eSeries Compact Sweeper. Customizable with numerous options, its 1500 liters of clean water coupled with a hydraulically adjustable spray bar allows street cleaning to be done in the ...
-
Manufactured by Boselan Tanks Co., Ltd (BSL)based in CHINA
Easy Construction: All the tank shells of Glass-Fused-To-Steel Tanks are factory coated, can be easily assembled and installed in difficult conditions, to meet the urgency requirement of project, unlike Concrete Tanks will be affected seriously by bad weather and other factors. Corrosion Resistance: Concrete tank would corroded through to reinforcing bar within 5 years of installation, ...
-
Distributed by Membrane Systems Europe BVbased in NETHERLANDS
The felt is used for sharp edges on tank walls. Because of the angular shape of the felt it will shape perfectly to the tank wall. It can be used to protect liners in tanks and bassins, to protect single membrane covers or to protect the rainskirt on double membrane covers. The felt make sure foil will not tear on shark edges of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you