Tertiary Water Treatment Equipment For Water And Wastewater In France
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
PURON MP pressurized hollow fiber ultrafiltration provide a cost-effective solution for a variety of water and wastewater treatment applications. The system’s high flux and solids tolerance properties eliminate the need for costly pretreatment and chemical cleans while producing high-quality effluent and meeting stringent regulatory targets, including drinking water LT2 specifications. ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
PULSION MBR modules offer up to 40% aeration energy reduction and 25% footprint reduction. Leveraging the key differentiating features of PURON MBR, this innovation pulses a large bubble through a chambered fiber bundle, creating a piston-like pumping action that results in lower air and aeration energy requirements than traditional scouring methods. Improved recirculation of mixed liquor in the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The ASPIDA membrane is constructed using proprietary technology that results in a strong, chemically tolerant, and highly permeable PVDF membrane product. Our ASPIDA membrane is isotropic, featuring the same mechanical properties when measured in all directions throughout the membrane. This leads to a higher-integrity product with greater durability and robustness compared to traditional ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
This patented module features reinforced PVDF hollow fibers that are fixed only at the bottom, virtually eliminating the clogging buildup of hair, fibrous materials and sludge solids. Solids and particulates, including bacteria, remain on the outside, while permeate is drawn through the membrane to the inside of the fibers. The aeration nozzle is centered in the fiber bundle to scour the entire ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
An evolution of the PURON MBR modules, the PURON HF series is ideal for tertiary applications including RO pretreatment and surface water treatment. With system recoveries of more than 95%, the PURON® HF produces consistent, high-quality effluent that meets or exceeds most regulatory requirements. This hollow-fiber product is a high throughput, compact wastewater solution with a low lifecycle ...
-
Manufactured by Salherbased in SPAIN
The DE-LA lamellar, Salher brand, is a device designed for the continuous settling of suspended sediments transported by wastewater for flows comprised between 5 a 100m3/hour. By installing lamellar modules in the sedimentation chamber, it is possible to increase the effective surface area of settling, which allows to increase the performance of the settler and significantly decreases the surface ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
This unique association allows to Actiflo Carb of being a competitive polishing process for WTPs, to remove emerging pollutants and pesticides present in natural water resources. PAC use, also allows of removing partly NOM (Natural Organic Matter), which can be adsorbed. More recently, Actiflo Carb has been used in an Industrial water treatment plant, in order to eliminate colour and TOC ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
IDRAFLOT® are intended to assure a perfect mixing of the waste with saturated water and an uniform distribution of the water flow along the entire surface of the unit made possible by their innovative modular design. IDRAFLOT® flotation units have mixing volumes intended to optimize the process and the unit’s total capacity. IDRAFLOT® units allow for enhanced thickening and ...
-
Manufactured by Salherbased in SPAIN
For the reuse of rainwater, Salher designs the rainwater treatment equipment SAL-PLU, consisting of a compact structure with hydraulic and electrical interconnection of the elements, a filter head with automatic and manual cleaning, a system of disinfection with membrane dosing pump by electromagnetic drive, cylindrical polyethylene accumulation tank for the mixing of the product and a ...
-
Manufactured by Salherbased in SPAIN
Grey water and wastewater reuse compact plants reuse of grey and waste water for several applications. Sized in accordance with R.D. 1620/2007 ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
Ovivo Shell nutshell filters are media-based filters similar to a multimedia filter, except nutshells (pecan and walnut) are used for media. The system is comprised of a pressure vessel, media, and internal screens. Ideally suited for final polishing, nutshell filters are proven to remove greater than 98% of 5 microns oil droplet and ...
-
Manufactured by JCFrance Industriebased in FRANCE
Fully stainless steel 304L or 316L (optional); Motor 0.75 kw; Cylinder diameter : 1300mm; Rotation speed : 3 turns / min; 8 filtration panels; Canvas surface : 6 m2; Unclogging ramp mesh equipped with 28 flat fan nozzles; Recovery of wastes inside the filter; Tubular flange connection; No submerged driving part; Platen drive in direct drive by the engine; Low maintenance; The mesh panels are ...
-
Manufactured by Salherbased in SPAIN
It is a chlorine-redox automatic equipment for water quality maintenance in fire protection water tanks and water reuse tanks, WWTP effluent pathogens removal, etc. in accordance with RD 865/2003 «hygienic sanitary criteria for legionellosis prevention and ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo microBLOX™ membrane bioreactor (MBR) is a fully functional, compact and ready-to-operate system to treat wastewater across a wide range of applications. Designed and engineered to be simple to operate, units are factory assembled from fine screening up to and including UV disinfection (if desired). When compared against other MBR packages or conventional treatment packaged plants, ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
The pre-engineered Actiflo Pack is a compact standard package plant for drinking water, process water and wastewater treatment. The process is a highly efficient and proven clarification technology, which uses a microsand ballast that functions as a seed, enhancing floc formation and settling. Flow rates from 40 to 320 m3/hr per unit for drinking and process water. 80 to 640 m3/hr per unit for ...
-
Manufactured by JCFrance Industriebased in FRANCE
Fully stainless steel 304L or 316L (optional); Motor 0.55 kw; Cylinder diameter : 700mm; Rotation speed : 3 turns / min; 2 filtration panels; Canvas surface : 1.5 m2; Unclogging ramp mesh equipped with 10 flat fan nozzles; Recovery of wastes inside the filter; Tubular flange connection; No submerged driving part; Platen drive in direct drive by the engine; Low maintenance; The mesh panels are ...
-
Manufactured by Polymembased in FRANCE
GIGAMEM: the new concept suitable for large treatment capacity. UF240 Module combines all the benefits of filtration modules (pressure filtration, high fluxes, easy maintenance and online integrity check) and submerged filtration (replacement of membrane elements only, space saving). It is the largest module in the market with an unmatched ...
-
Manufactured by JCFrance Industriebased in FRANCE
Fully stainless steel 304L or 316L (optional); Motor 0.55 kw; Cylinder diameter : 980mm; Rotation speed : 3 turns / min; 3 filtration panels; Canvas surface : 2.25 m2; Unclogging ramp mesh equipped with 10 flat fan nozzles; Recovery of wastes inside the filter; Tubular flange connection; No submerged driving part; Platen drive in direct drive by the engine; Low maintenance; The mesh panels are ...
-
Manufactured by JCFrance Industriebased in FRANCE
Fully stainless steel 304L or 316L (optional); Motor 0.55 kw; Cylinder diameter : 980mm; Rotation speed : 3 turns / min; 4 filtration panels; Canvas surface : 3 m2; Unclogging ramp mesh equipped with 14 flat fan nozzles; Recovery of wastes inside the filter; Tubular flange connection; No submerged driving part; Platen drive in direct drive by the engine; Low maintenance; The mesh panels are ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
To meet ever greater needs, Veolia Water Technologies has developed the Actiflo Carb clarification process that ensures the production of high quality water through the use of activated carbon in powder , whose microporous structure provides a surface with high absorbency to capture the contaminants present in the water and remove them by absorption. Actiflo Carb includes the phases of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you