Total Dissolved Solids Monitoring News

  • TD-120 Oil in Water Monitor at NAPEC 2017

    Autochim, our French distributor, will show the TD-120 Oil in Water Monitor at the 7th North Africa Petroleum Exhibition & Conference (NAPEC). This year's exhibition will be held March 21–24 at the Convention Center of Oran, Algeria. In addition to the TD-120, Autochim will be showing other analyzers and monitors from Turner Designs Hydrocarbon Instruments and displaying product ...

  • Advanced turbine control, yaw adjustments offer yield gains of up to 8%

    A data-led performance optimization plan can boost average wind generation by between 3% and 8% and some sites can achieve further gains through forestry restructuring, Aaron Culver, Measurement & Analysis Team Leader at renewable energy consultancy SgurrEnergy, said. Yaw realignment can boost energy yield by as much as 3%.  Growing expertise in windfarm performance and data analytics is ...

  • TD-120 Brochure Now Available in Multiple Languages

    Turner Designs Hydrocarbon Instruments, Inc. works with more than 35 dealers providing best oil-in-water measurement solutions for customers worldwide. This year, we have completed three International dealer training conferences—the Middle East, Asia Pacific, and Europe. Special thanks to the hosts: Descon Automation Controls, HMA Instrumentation, and ECM ECO Monitoring. Our dealers were ...

  • Discover the new TD-Diver

    We are very excited to introduce the new TD-Diver water level logger as the Mini-Diver’s successor! The new TD-Diver water level logger is a totally new design which combines over 75 years of groundwater monitoring ...


    By Eijkelkamp Soil & Water

  • Autochim to Display the TD-120 at Pollutec 2016

    Turner Designs Hydrocarbon Instruments’ newest oil in water monitor, the TD-120, will be shown at Pollutec 2016 by our French distributor, Autochim. The 27th international exhibition of environmental equipment technologies and services will be held at ...

  • PMA to Show the New TD-120 at WWEM 2016

    The new TD-120 Oil in Water Monitor will be shown at the WWEM conference. This biennial exhibition for Water, Wastewater and Environmental Monitoring will be held at Telford International Centre, Telford, Shropshire, TF3 4JH, England, November 1–3, 2016. The ...

  • 2016 Webinar Program announced

    All webinars will take place at 16.00 UK time / 11.00 US Eastern time.  The topics and dates will be confirmed approximately 2 weeks in advance so please do check this page regularly for the latest information. Date                         Title     ...


    By AMETEK Land

  • “PEFTEC 2015 will be frenetic” warn organisers

    PEFTEC 2015 will take place at the Antwerp Expo in Belgium on 18th and 19th November. With a packed Conference agenda, over 80 Seminars and over 120 Exhibitors, the organisers have warned that the 2-day event will be extremely busy. “With so much going on in such a short space of time, PEFTEC will be frenetic and visitors should plan their time very carefully,” says Marcus Pattison. ...

  • ´PEFTEC 2015 will be frenetic´ warn organisers

    PEFTEC 2015 will take place at the Antwerp Expo in Belgium on 18th and 19th November. With a packed Conference agenda, over 80 Seminars and over 120 Exhibitors, the organisers have warned that the 2-day event will be extremely busy. “With so much going on in such a short space of time, PEFTEC will be frenetic and visitors should plan their time very carefully,” says Marcus ...

  • TD-5100 ECA Scrubber Wash Water Monitor Will Be at the Green Ship Technology Conference 2015! Join Us!

    We are pleased to invite you to the Green Ship Technology conference on 11 – 12 March 2015 in Copenhagen. Our new TD-5100 ECA Scrubber Wash Water Monitor will be on display during the conference! Our President, Gary Bartman, will also be on the Practical Solutions for Verification of Wash Water Criteria for Exhaust Gas Scrubbers Panel. Click here to view the event agenda [ ...

  • Oil Price Fall will Impact Revenues for Flow Control and Treatment Equipment

    Revenue forecasts for pumps, valves, instrumentation, filters, turbines, etc. have to be reviewed due to the dramatic fall in world oil prices. Here are aspects to be considered: Chronology Time from order date to revenue posting by flow equipment supplier. Large capital equipment such as big pumps experience a multiyear revenue cycle, so 2015 revenues are in part ...


    By The McIlvaine Company

  • Ingeteam reinforces its position in the Brazilian wind sector with another 196 MVA

    Ingeteam has been awarded another two contracts for supplying Protection, Control and Supervision Systems in Brazil, for the automation of CER's Assuruá 68 MVA, 230kV Wind Farm at the Gentio do Ouro Power Plant, and for the Serra I, Serra II, Serra III and Lanchinha de Gestamp wind farms, with a ...


    By Ingeteam

  • Product Hightlight: 4100 E09 Electronics Package for TD-4100 XD and TD-4100 XDC Oil in Water Monitors!

    High Resolution LCD Multifunction Color Graphics Display Stepping up to industry demands, we have created a new high functionality user interface for our standard oil in water process and environmental discharge monitors. Our new electronics package makes set up, calibration, and process monitoring easier than ever. To answer an age old problem of the high cost of monitoring, we now have ...

  • California`s Release of Draft Initial Priority Product Work Plan Drives Agenda of 5th Safer Consumer Products Summit

    With the Draft Initial Priority Product Work Plan by the California Department of Toxic Substances Control (DTSC) now released, it is important for manufacturers, importers, and retailers of consumer products in the categories listed by DTSC in the Work Plan to understand and ...


    By Bergeson & Campbell, P.C.

  • The advantage of CNC Centerless Internal Grinding Machine

    The CNC series centerless grinding machines can be used for infeed grinding and thrufeed grinding to ensure accuracy, high productivity in workpieces Automatic loading and unloading attachment is convenient to operate and reduce cost. The main advantage are as follows: 1.The grinding and regulating wheel spindles are made of high quality alloy steel (SNCM-439), and treated through: ...


  • Maintenance and Operation Guideline of Center less Type CNC Internal Grinding Machine

    Nowadays, CNC machines are used widely in machinery manufacturing. Centerless Type CNC Internal Grinding Machines are specifically designed for various high precision bearing parts. Our CNC machines are designed with least requirement on operation and maintenance. However, it’s still very important to follow some basic guidelines to ensure the highest work efficiency and longest service ...


  • The advantage of CNC Internal Grinding Machine of Chuck Type

    The CNC series Chuck internal grinding machine is suitable for inner diameter of workpiece. The efficient and reliable programming of grinding and dressing cycles is suitable for mass production and ensures the precise concentricity on inner diameters. Below is the main advantage of it: 1.Equipped with FANUC colour screen, the latest technology in digital control systems. The table ...


  • The advantage of using CNC Vertical Double-Surface Grinding Machine

    It's designed for grinding parts with two parallel grinding wheels simultaneously. Various high precision and thin parts with parallel side surfaces, no matter they are made in metal or nonmetal material, can be processed. The product is mainly used in several fields including air condition compressor, bearing, gear, auto parts, hydraulic parts and other industries. Below is thereof few ...


  • DTSC Releases Draft Initial Priority Product Work Plan

    On September 12, 2014, the California Department of Toxic Substances Control (DTSC) released its much anticipated draft Initial Priority Product Work Plan under the Safer Consumer Products Regulations. The Regulations require that DTSC, by October 2014, develop an Initial Priority Product Work Plan that describes product categories it will use to evaluate and identify product-chemical ...


    By Bergeson & Campbell, P.C.

  • The advantage of CNC Internal Grinding Machine of Chuck Type

    The CNC series Chuck internal grinding machine is suitable for inner diameter of workpiece. The efficient and reliable programming of grinding and dressing cycles is suitable for mass production and ensures the precise concentricity on inner diameters. Below is the main advantage of it: 1.Equipped with FANUC colour screen, the latest technology in digital control systems. The table ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you