Tramp Oil Equipment For Water And Wastewater Available In Bahrain
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
Water from hydraulic oil. Tramp oil from coolants. Oils and lubricants from cleaners. Liquid contaminants from waste effluents. Material: PP, Nylon, ...
-
Manufactured by 3nine ABbased in SWEDEN
The MOS-type oil skimmer is developed for applications with many solid particles. It separates the tramp oil effectively and extends the lifetime of your cutting fluid. The technique exploits the viscosity differential between oil and cutting fluid. The tramp oil has greater viscosity than the cutting fluid and will therefore cling to the rotating spiral. The oil is transported upwards and is ...
-
Manufactured by MKR Metzger GmbHbased in GERMANY
Specific Characteristics: Capacity 500 liters, Filtration by Filter Fleece, Throughput 250 l/min, High Pressure Cleaning System, (either fresh water or emulsion), ´Mechanical “Tramp Oil ...
-
Manufactured by Vikoma International Limitedbased in UNITED KINGDOM
The T9 skimmer system is highly efficient for use in the removal of a wide range of water contaminated hydrocarbon based pollutants. The system is designed for continuous use in both hazardous and corrosive environments. It can be supplied either as free floating, for use when there are significant water level changes, or fixed, to be used where a "C" cup or skim pipe system is in place and water ...
-
Manufactured by SkimOil, LLCbased in USA
These fiberglass units have the unique capability to be modified to fit the application, in that it has a built in oil reservoir which typically has a horizontal plate that separates it from the effluent chamber. These two chambers can be divided horizontally or vertically, or combined to fit your system needs. This unit will typically deliver an effluent quality of 10ppm or less of unemulsified ...
-
Manufactured by Friess GmbHbased in GERMANY
Our Oil Separation System in the smallest format. A bypass unit used to separate oil that does not ...
-
Manufactured by Stetfield Separators Ltd.based in UNITED KINGDOM
Free oil removal from water or soluble coolants to <15mg/l. For separation of any two immiscible liquids of differing specific gravity at a greatly enhanced ...
-
Manufactured by Oil Skimmers, Inc.based in USA
Oil contamination issues often result in downtime, maintenance, bacteria growth, and costly replacement of coolants and wash water. In certain applications, proper removal of tramp oil can prove difficult due to limited access to the sump. CoolSkim coolant skimmer and coalescerFor applications like these, where limited space or access doesn’t allow for the installation of a Brill® ...
-
Manufactured by Freddy Products Ltdbased in UNITED KINGDOM
The Freddy Tramp Oil Separator has been designed to combat the problems associated with tramp oil levels in machine tool coolant systems. Tramp oil can cause a variety of problems both to the finished product and the operator. The Tramp Oil Separator is easily manoeuvrable, so it can be used throughout the factory workshop, and it runs continuously so not to interfere with production, siphoning ...
-
Manufactured by Vivex Separation ABbased in SWEDEN
A process fluid plant with built-in purifier using no filter media. The unit is built in stainless steel and is used for purification of industrial washing fluid and cutting coolants. The furification system separates contaminates as tramp oil and solid particles from the process fluid. The purification system consits of resuseable bag filter for particles and lamella separator for separation of ...
-
Manufactured by MKR Metzger GmbHbased in GERMANY
Specific Characteristics: Throughput 800 - 3000 l/h, Pre Filter 350 µm, Manual Disludging (without usage of tools), Capacity Sludge Container up to 5 liters, Three Phase Separating (alternative two phase separating), Removing Distracting Tramp Oil, Compact Design, Adjustable Flow ...
-
Manufactured by Zebra Skimmers Corporationbased in USA
Metalworking fluid is formulated with water that lacks any minerals. However, tap water contains many. And, since your coolant only accumulates more minerals over time due to evaporation (more than 5% per day by volume), water hardness, if not addressed, can lead to ...
-
Manufactured by A.M. Industrial Technologies ITLbased in ISRAEL
The systems are totally engineered and manufactured by ITL as an outcome of continuous R&D ,“out of the box” thinking based on years of experience in industrial Filtration. The results are modular skid mounted system embedding various technologies and coolant tanks to fit customers’ ...
-
Manufactured by Filtertechbased in USA
In the process of rolling steel strip, the roll coolant over time will become contaminated with ferrous particles and tramp oil. These contaminants in high enough concentrations can result in increased roll wear and roll changes, reduced production and product quality, increased roll oil and water consumption and decreased coolant life. The Filtertech Model MSI magnetic separator utilizes a ...
-
Manufactured by Meltblown Technologies Inc. (MBT)based in USA
SKIMMING BILGE BOOMS – Bilge booms are best used in leisure boat bilges. The rope loop anchors the boom while it absorbs any tramp oil. SKIMMING BOOM PILLOWS – Boom pillows are huge, high capacity bilge/sump absorption products. An O-ring on one end is used to anchor it while it absorbs any tramp ...
-
Manufactured by Darrell Hanna and Associates, Inc. (DHA)based in USA
A dense web of 100% polyester fibers engineered to last several times longer than surface loading non-woven media. Designed to have exceptional dirt holding capacity and efficiency, Power-Flow™ will cake better to help you improve productivity, lower manufacturing costs, and reduce the amount of media being consumed. ...
-
Manufactured by Zebra Skimmers Corporationbased in USA
Separates oils for coolant-free skimmer output. Mounts below Zebra Belt Skimmer & Sidewinder. Rugged, heavy-duty, steel construction. Discharge pipes and mounting hardware included. Brass outlet fittings. 2 quarts per hour oil output capacity. One year ...
-
Manufactured by Jorgensen Conveyor and Filtration Solutionsbased in USA
The MunchMan’s unique stacked conveyor arrangement easily manages heavy chip loads of long stringy chips, and nested balls of chips that overwhelm standard chip conveyors. Ideally suited for turning and milling applications, MunchMan greatly reduces or eliminates conveyor jamming problems. This reduction in expensive machine tool downtime results in a fast return on your investment. ...
-
Manufactured by Abanaki Corporationbased in USA
Chip and Coolant Separation System. The air driven Chiperator vacuums and filters old cutting fluids loaded with chips from machine sumps, tanks and parts washers. When the optional Abanaki"s Lil" Blue skimmer is purchased, the coolant will also be cleansed of tramp ...
-
Manufactured by Vivex Separation ABbased in SWEDEN
A stationary plant made in stainless steel with 3-phase lamella separator for separation of solid particles and tramp oil from the process liquid. Lean maintenance system with automatic operation, cleaning, and waste handling. This unit is used for by-pass purification of industrial washing liquids and cutting ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you