Only show results in Michigan? Ok

Trash Pumps equipment for Water and Wastewater

  • Premium

    Piranha - Solids Handling Pump

    Piranha Solids Handling Pump and Piranha Wastewater Trash Pump line is comprised of models ranging from 1 to 30 horsepower. These Solids Handling and Wastewater Pumps are designed for pumping slurry & debris laden water in sump & lagoon applications including: industrial, sewage, wastewater, animal & vegetable waste, paper pulp, ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Submersible Pumps Product line

  • Premium

    Piranha - Model 1.5, 3, and 4 Inch - Slurry/Trash Pumps

    Trash pumps, or “slurry pumps,” are heavy-duty pumps that are capable of transferring large amounts of debris and water that most other pumps can’t. Available 1.5, 3, and 4 inches, Piranha Pump is proud to offer portable engine driven trash pumps that are extremely efficient and reliable. These Trash/Slurry Pumps are designed for ...

    By Piranha Pumps & Dredges - Equipment Specialties Co., Inc. based in Albuquerque, NEW MEXICO (USA). from Other Products Product line

  • Ultra - Model V Series - Self Priming Pumps

    Gorman-Rupp Ultra V Series engine-driven, self-priming centrifugal pumps are designed for heavy-duty solids handling, high-head applications. Advanced features allow for easy access during maintenance. Built upon the foundation of the Super T Series, Gorman-Rupp's Ultra V Series pumps excel in high-head applications where traditional self-priming ...

    By Gorman-Rupp Co. based in Mansfield, OHIO (USA). from Self-Priming Pumps Product line

  • Chemical Induction Pump

    Global Treat Inc.'s chemical induction pump system is the right choice for feeding and mixing your chlorination and de-chlorination chemicals into the contact chamber. Its' reputation for low maintenance and proven reliability make it the ideal choice for new installations or retro fitting an existing competitors system.

    By Global Treat, Inc based in Spring, TEXAS (USA). from Chemical Induction Pumps Product line


    This model is designed for pumping jobs such as construction sites and manhole pumping where lightweight, high volume, trash pumps are needed. It has the ability to pass through a 12' opening and pump in debris laden areas. A small hole strainer is available for limiting solids to be pumped. Discharge hole 3' and solids handling 2 1/2'. Its ...

    By Eco Equipments Inc. based in Taipei, TAIWAN.

  • Hatz - Special Pumps

    Hatz special pumps are used in applications where a normal pump is not robust enough or where some special requirements are needed. This, for example is the case for thermal oil pumps. With temperatures of up to 350° C these pumps have a totally diff erent requirement compared to trash or clean-water pumps. Very often there are synthetic oils ...

    By Motorenfabrik Hatz GmbH & Co. KG based in Ruhstorf a. d. Rott, GERMANY. from Pumping System Product line

  • Thompson - Heavy Duty Trash

    Thompson trash pumps are specified for the really tough jobs where a wet priming pump capable of handling large solids and/or abrasive material is needed. Thompson trash pumps outperform other centrifugal trash pumps on the market and cost less to operate. The quality and dependability engineered into each Thompson heavy duty trash pump provides ...

    By Patriot Pumps based in Waterford, MICHIGAN (USA). from Thompson Pump Product line

  • 2 Foot Muscle Wall

    The Muscle Wall system is able to withstand the immense force of rushing or standing water due to its patented toe design. The pressure of the water forces the toe downward, thus overpowering the hydrostatic force, which anchors the wall to the ground.

    By Muscle Wall Holdings, LLC based in Logan, UTAH (USA).

  • Dragon - Model 118 Series - Centrifugal Pump

    Whether you need centrifugal pumps or heavy-duty pumps for handling solid waste and trash, Dragon has you covered. We carry a full line of pumps that can run on a variety of fuels – electric, diesel, or natural gas. Dragon will also help you select the right pump with the right pressure to insure you don’t incur extra horsepower ...

    By Dragon Products, Ltd - Modern Group LTD based in La Porte, TEXAS (USA). from Centrifugal Pumps Product line

  • Model 2CT - 2` x 2` Self Priming Trash Pump

    The 2CT pump quickly close couples to a 145TC or 184C frame motor. The 2CT features a back pull out design and a removable front trash cleanout for ease of maintenance. A 304SS drive sleeve protects the close coupled driver shaft. Available options include a bearing pedestal for base mounted pumps as well as a hydraulic motor drive ...

    By MP Pumps Inc. based in Fraser, MICHIGAN (USA). from CT - Self Priming Trash Pump Product line

  • PowerPrime - Model DV150c - Self-priming Centrifugal Trash and Sewage Pump

    The 6” suction x 6” discharge self-priming centrifugal DV150c trash and sewage pump provides up to a maximum of 2,500 gallons per minute pumping and up to 150 feet of head. This pump is usually mounted on a trailer and features the standard PowerPrime Clean Prime Venturi priming system which allows it to run continuously, unattended ...

    By Power Prime Pumps based in Bakersfield, CALIFORNIA (USA). from Trash and Sewage Pumps Product line

  • Morganode - Model II - Marine Anodes

    Norton Corrosion Limited's Morganode II  Marine Anodes are designed for physically harsh environments where protective current is required. The HDPE body provides superior operating endurance in pump housing, sheet pile wall and pipe pile applications.

    By Norton Corrosion Limited, LLC (NCL) based in Woodinville, WASHINGTON (USA). from Anodes- Impressed Current Anodes Product line

  • Hypro - Aluminum Transfer Pumps

    Aluminum housing is suitable for applications of flood water removal, lawn and garden watering and pond filling. Powered by field-proven Hypro PowerPro engine. Easily handles high capacity flow rates up to 270 gpm. Available in 2”and 3” models to fit common hose sizes. EPDM mechanical seal and inlet valve for longevity and reliability ...

    By Even-Spray & Chemicals Ltd. based in Winnipeg, MANITOBA (CANADA).

  • Model P3O87 - Self-Priming Centrifugal Trash Pumps

    With up to 2.75 inch solids handling capability. These pumps offer unrivalled reliability through the use of high quality ductile iron castings and 17-4PH stainless steel shafts. Bare shaft, frame mounted, self-priming, heavy duty,solids handling pump

    By Pioneer Pump - Franklin Electric Co., Inc. based in Canby, OREGON (USA). from Wet Self-Priming Pumps Product line

  • In-Viro-Drum - Model 4200 - Industrial Combination Unit

    In-Viro-Drum is a highly efficient portable vacuum system capable of vacuuming potentially flammable liquids and solids into open top 205 litre drums or various other receivers with an increased safety factor due to the unit design.In-Viro-Drum is utilized for spill recovery, facility maintenance, and waste segregation, as well as a cost effective ...

    By Nican Holdings Ltd. based in Calgary, ALBERTA (CANADA).

  • Model TAH - Heavy Duty Horizontal Slurry Pump

    TAH Slurry Pumps are heavy duty horizontal slurry pumps designed to handle abrasive and high density slurries in mining and heavy industry. TAH slurry pumps are available in sizes ranging from 1 inch to 18 inch discharge and feature high efficiency performance capable of flow rates from 10.8 to 5400 m³/h and heads up to 125 ...

    By Shijiazhuang Ruite Pump Co.,Ltd. based in Shijiazhuang, CHINA.

  • Aussie - Model QP 6 Inch - Trash Pump

    Engineered to meet the requirements of professional contractors, rugged and dependable, these diesel powered trash pumps are ideal for de-watering applications with high solid content. Huge 4,150 lpm flow with a maximum head of 30 metres or 43 psi. Self priming from 7.6 metres.

    By Australian Pump Industries based in Castle Hill, AUSTRALIA. from QP Water Transfer Product line

  • SludgeMaster - Submersible Pumps

    SludgeMaster - Submersible Pumps For a pump that handles mud, leaves, sand, and any solid up to 1.5' without clogging, get the SludgeMaster™ air-driven high-flow pump. This trash pump operates at up to 300 gpm—our highest flow rate— runs on compressed air for continuous power supply. Weighing just 59 lbs, the SludgeMaster is ...

    By Warren Rupp, Inc. - A Unit of IDEX Corporation based in Mansfield, OHIO (USA). from Versa-Matic Submersible Pumps Product line

  • Dri-Prime - Model HL5M - Automatic Self-Priming Centrifugal Pump

    The HL5M automatic Godwin Dri-Prime 6' x 6' (150mm x 150mm) centrifugal pump is an extremely powerful yet compact high pressure pump with flow capabilities to 1450 gallons per minute (91.5 l/sec.) and discharge heads to 500 feet (152.4 M). In addition, the HL5M features the unique Godwin high pressure oil bath mechanical seal design that allows ...

    By Aquatech Dewatering Company based in Maple, ONTARIO (CANADA). from High Head & Jetting / HL Series Pumps Product line

  • Phantom - Model XU-3 - High Pressure Self Primer Pump

    Net Weight: 472 lbs. Shipping Weight: 497 lbs. Impeller Diameter: 11”. RPM range: 850 to 2150. Max. Solids: 1 3/16.

    By Phantom Sales Group Inc. based in Bartow, FLORIDA (USA). from High Pressure Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you