Trash Racks Equipment For Water And Wastewater Near Idaho
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Brackett Green fixed bar screen's supporting structure is attached to the civil works and can be utilized as either a permanent or temporary solution to meet specific plant conditions, whether it's an influx of process water due to seasonal storms or screening a channel with low debris levels. The screen bars can be spaced between 10mm to 300mm (1/2" to 12") apart and are designed to ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
For small and remote areas, or for intakes that rely on manual cleaning methods, the Brackett Bosker Bandit automatic trash rake is ideal. Compact, with an extendable, rotating, hydraulic arm designed to clear debris from horizontal and vertical screens with bar spacing of 12mm up to 200mm, it allows for a safe workload capacity of 250 kg (550 lb). The equipment can easily be retrofitted to ...
-
Manufactured by Aqua Systems 2000 Inc.based in CANADA
The Inline Cleaner can be readily adapted to large or small applications and configured to sweep a variety of different screens and trash racks. Unwanted trash can be swept out of the water with a reliable, low power, low maintenance, Inline ...
-
Manufactured by Aqua Systems 2000 Inc.based in CANADA
The Side Sweep Cleaner can be readily adapted to large or small applications and configured to sweep a variety of different screens and trash racks. Unwanted trash can be swept off the screen and downstream with a reliable, low power, low maintenance, Side Sweep ...
-
Manufactured by Aqua Systems 2000 Inc.based in CANADA
Aqua Systems 2000 Inc. introduces the self-cleaning Trash Rack. This simple and flexible design can be readily adapted to large or small applications where trash problems range from surface debris to entrained plant matter. Unwanted trash can be swept out of water with a reliable, low power, low maintenance and self-cleaning screen/rack from Aqua Systems 2000 Inc. The Escalator Trash Rack has a ...
-
Manufactured by Norton Corrosion Limited, LLC (NCL)based in USA
Norton Corrosion Limited's Morganode II Marine Anodes are designed for physically harsh environments where protective current is required. The HDPE body provides superior operating endurance in pump housing, sheet pile wall and pipe pile applications. ...
-
Manufactured by ASL AQFlow Inc.based in CANADA
Once it has been calibrated, the ASFM Monitor provides reliable, accurate and repeatable, long-term real-time monitoring of turbine discharge. It has been developed for use in low-head, short-intake plants, but can be used in higher head plants as well. It is installed on the walls of the intake, and thus can also be used for the detection of trashrack blockage and penstock rupture. If intake ...
-
Manufactured by ASL AQFlow Inc.based in CANADA
Acoustic scintillation drift is a technique for measuring flow in a turbulent medium by analyzing the variations in ultrasonic pulses that have been transmitted through the medium. The Acoustic Scintillation Flow Meter (ASFM) uses this technique to measure the velocity of the water flowing through a conduit (e.g. an intake to a hydroelectric turbine) by utilizing the turbulence in the flow (e.g. ...
-
Manufactured by Lakeside Equipment Corporationbased in USA
The Lakeside/Muhr Hydronic 3000-5000 Multifunctional Series Trash Rake is the latest development in trash rack cleaning technology. These rakes are hydraulically operated and multifunctional to handle numerous tasks on or near stationary bar racks. Equipped with the most current hydraulic components, drives and pumps, and a state-of-the-art control system, reliability is guaranteed under the ...
-
Manufactured by Lakeside Equipment Corporationbased in USA
Clean bar racks up to a depth of 100 feet with the hydraulically operated Hydronic K Series Trash Rake. The articulating design gives the rake arm a long reach suitable for manual surface skimming and removing large objects, such as trees, barrels and rootstocks. It is available as a stationary, swiveling or traversing unit providing the right fit for your ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The water enters the BOXWIP concrete pit through the upstream aperture, flows through the bar rack which is periodically cleaned by a wall-plate mounted “CV” type rake. The wall-plate is slid into the wall ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The bar rack is installed across the pit. The rake is normally parked in its top position above deck. The comb is disengaged from the bar rack. When a signal is received, the rake travels downwards, directed by the wall guides. On reaching the bottom, the rake tilts from its open position to its raking position. The rake tines penetrate between the bars of the rack. The rake travels up-wards ...
-
Manufactured by Duperon Corporationbased in USA
Automated raking solution for existing trash racks and bar screens. The FlexRake Rake Only (FRO) is an automated raking mechanism designed to be mounted onto existing screens (on the deck or on the screen itself depending on the site). This retrofit option is an economical and effective way to utilize existing screens for bar openings ½ inch to 4 inches (or ...
-
Manufactured by Duperon Corporationbased in USA
Handles high volumes, high velocity, and all types of debris for absolute flow ...
-
Manufactured by Duperon Corporationbased in USA
The workhorse that set the standard for simplicity in unpredictable environments. The FlexRake® Heavy Duty (FRHD) model is a coarse screen engineered for open channel and applications where debris size and velocity may be unpredictable. The FlexRake HDs are the industry’s workhorse. They have proven their versatility with more than 35 years of handling the debris that makes it into a ...
-
Manufactured by American Tank Companybased in USA
American Tank Company is an approved applicator for Polibrid Coatings – a field proven coating product for more than 20 years. Polibrid is a solventless, 100% solids by volume elastomeric polyurethane that is applied by plural-component spray equipment at virtually any film thickness at temperatures as low as 25° F. It can be placed in immersion service immediately, providing rapid ...
-
Manufactured by Hydro Gate - a subsidiary of Mueller Water Products Inc.based in USA
Cast Iron. Machined faces, drilled, and tapped for gate attachment. Forms opening through wall. A wall thimble is a separate piece of steel positioned into the wall structure before the concrete is placed. It provides a rigid, fixed opening and an accurate mounting surface for the gate, to minimize the possibility of distortion. Since most anchor bolts can be minimized, construction time speeds, ...
-
Manufactured by Hydro Component Systems, LLC (HCS)based in USA
Ideal for use in a variety of environments and industries, our trash racks will help your company screen debris from your intake water. Our trash racks prevent harmful debris from reaching your expensive ...
-
Manufactured by Hydro Component Systems, LLC (HCS)based in USA
At the Two Rivers, WI Nuclear Power Plant, the submerged offshore HCS intake screen provides cooling water for the power plant. The intake is 30 feet in diameter and several feet. below the surface of water. The intake screen was fabricated with HDPE blades at six-inch clear ...
-
Manufactured by Hydro Component Systems, LLC (HCS)based in USA
The trash racks with frames for the Victoria Texas Power Plant were fabricated using HDPE for the blades, pultruded FRP structural members for the frames and 316 stainless steel for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you