Only show results available in Connecticut? Ok

Turbidity Monitoring Applications

  • Premium

    UV fluorescence technology for monitoring once through cooling water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Water monitoring technology for coastal & estuary sector

    Measurement of water quality in coastal regions and estuaries is critical in the characterization of hypoxic ‘dead zones’ as a result of nutrient loading and algal blooms in the water bodies. Sediment loading analysis through turbidity measurement is also important for coastal trend identification and modeling. Hydrolab and Sea-Bird Scientific offer a variety of multiparameter water quality instrumentation and nutrient sensors for long-term coastal applications. Sea-Bird Scientific water quality...

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a...

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Flow Measurement in Gold Ore Processing Plant Solution for Industry - Surface mining

    Application: Stainless steel pipe DN 500. Partial filling with heavy fluctuation. Acidified, very turbid water (approx. 50 NTU).

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Water Data Management Solution for Alpine Monitoring

    KISTERS has developed a specific version of WISKI with unique benefits for those monitoring Alpine Regions. Some of its advanced features include specialized calculations for measuring precipitation, snow, sediment transport and water balances in catchments.

    By KISTERS AG based in Aachen, GERMANY.

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Continuous Instream Monitoring

    Turbidity in natural waters is recognized as an important indicator of its environmental health, and because it's a good surrogate for suspended sediment, monitoring turbidity has always been the "holy grail" for hydrologists. But because of earlier technology, "turbidity" has traditionally been a "bad word". The DTS-12 turbidity sensor is the first sensor to make turbidity monitoring practical, and no longer difficult, inaccurate, expensive, or labor-intensive. Turbidity is the cloudiness or murkiness of water...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Process Analytics - Chemical Processes

    METTLER TOLEDO/INGOLD solutions cover a wide range of process conditions found in chemical processes. Our products master even most demanding chemical environments with high temperature and pressure - the industry proven design ensures high safety and reliability. Certificates as ATEX, FM, CSA, 3.1B are available with our products to comply with plant safety requirements. Our application solutions can be integrated into plant wide process control and asset management systems.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Water treatment solutions for the construction waters industry

    Construction site stormwater run-off, groundwater and dewatering water. Passive and active treatment systems.

    By Dungeness Environmental Solutions, Inc. (DESI) based in Everett, WASHINGTON (USA).

  • Haze Monitoring

    The principle cause of regional and urban haze, or visibility impairment, is light extinction caused by fine particles, sulfates, organic and elemental carbon, nitrates and crustal matter. Particles between 0.1 and one micrometers in size are most effective at scattering light, in addition to being of greatest concern for human health.

    By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA.

  • Water Quality in watersheds

    Metro Vancouver serves an area of 282,000 hectares (approximately 1,088 square miles). The drinking water supplied to the 2.3 million residents of this growing community is sourced from three major reservoirs – Capilano, Seymour and Coquitlam. These vast watersheds, located in the mountains north of Vancouver, gather billions of gallons of snowmelt and rainwater. From these reservoirs, the water is treated and filtered to remove turbidity and potentially harmful micro-organisms ensuring quality drinking water is...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Process Analytics - Biotech and Hygienic Processes

    METTLER TOLEDO/INGOLD offers a wide range of hygienic and sterilizable/auto- clavable measurement solutions for biotech and hygienic processes. Based on field experiences and expertises in hygienic design for CIP (Cleaning-in-Place) and SIP (Sterilization-in-Place) applications our solutions comply with the most stringent industry requirements. Critical biotech/hygienic applications in pharmaceutical, food and beverage are controlled by measuring pH, conductivity, dissolved oxygen, CO2 and turbidity.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Electrocoagulation Units for Commercial Laundry

    Laundry capacity can be increased three times, using the same amount of fresh water, by recycling the wash and rinse water. Reclaimed wash and rinse water saves the cost of purchasing water, soap, heat and sewer. Reclaim your water for $1.70 per thousand gallons.

    By Powell Water Systems, Inc. based in Centennial, OREGON (USA).

  • EPR waste minimisation monitoring for wastewater treatment industry

    The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Online monitoring solutions for the semiconductor industries

    AppliTek’s analytical solutions for efficient wet etching processes can be used in the semiconductor industry where latest generation fabs have only accelerated the needs for process monitoring. With the increased speed of processing, precise chemical concentration control is becoming crucial to wafer processing in order to obtain consistency and more cost-effective manufacturing of integrated circuits.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Oceanographic Monitoring

    For survey operations up to 6000m depth (and deeper by special request), Valeport offer instruments to measure and record the classic physical parameters of Temperature, Depth, Salinity, Density, Currents and Waves. Along with the most accurate Sound Velocity sensors in the world; the ability to interface other parameters / sensors such as pH, Dissolved Oxygen Turbidity, Flourometer, Transmissometer and PAR; Housings and deployment frames to suit in-line moorings, profiling and seabed deployments, Valeport can...

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you