Ultrafiltration Applications

25 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Ultrafiltration ×

Process Belt Meshes for Belt Filter

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

VACUBELT filter belts for belt filters guarantee continuous filtration with high throughput, low residual moisture and optimal results for the filter effect.

Membrane filtration systems for food and beverage industry

by GEA Filtration     based in Hudson, WISCONSIN (USA)

The product knowledge we gained by this experience is indicated by the following list of products suitable for processing on a GEA Filtration membrane filtration system. These systems include microfiltration, ultrafiltration, nanofiltration, and reverse osmosis with either spiral-wound, stainless steel, ceramic, tubular, or plate-and-frame configurations.

Q-Sep - Advanced Ultrafiltration Modules

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pressur

Particle filtration for the food industry

by atech innovations gmbh     based in Gladbeck, GERMANY

In chemical and biotechnological applications, ceramic membranes ensure protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more. 

QUA - Industrial Water Filtration

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

Accurate Ink Dosing Pumps In Printing And Packaging

by Verderflex Peristaltic Pumps - part of the Verder Group     based in Castleford, UNITED KINGDOM

Verderflex peristaltic pumps offer optimum performance to the printing and packaging industries. Combining the ability to self prime, run dry and an ultra fast tube changeover these pumps keep downtime to an absolute minimum. Additionally, the combination of the simple tube clamping mechanism and the low tube cost generates savings in by eliminating specialist tools and labour and by costly cleaning cycles.

Water treatment for landscape

by Lindsay Corporation     based in Omaha, NEBRASKA (USA)

The sources of water for traditional landscape irrigation are many. They include municipal water, groundwater, and surface water; treated municipal wastewater treatment plant effluent properly treated to the standards of quality required for irrigation; and ever-increasing harvested rain, gray and storm waters. Issues confronting the landscape irrigation market range from treatment of alternate supplies to addressing iron removal in order to provide suitable quality water for any given landscape irrigation application. With our experienced staff of irrigation industry professionals, and in cooperation with landscape architects and consultants, we have the expertise and flexibility to select the best, most cost-effective solution for addressing any landscape market irrigation water treatment application.

Water treatment for golf

by Lindsay Corporation     based in Omaha, NEBRASKA (USA)

The compromised quality of traditional golf course irrigation water sources and the ever-increasing cost of municipal water present golf course owners, operators and superintendents with issues affecting irrigation supply, cost and availability. With our staff of golf industry professionals, golf course superintendents and consultants, along with our water treatment process, application and decades of engineering experience, we have the expertise and flexibility to select the best, most cost-effective solution for addressing any golf market irrigation water treatment application. Whether it’s suspended solids removal via filtration to the treatment of brackish waters due to salt water intrusion, treatment of municipal and industrial wastewater to acceptable reuse quality, or complete sea water desalination systems, Watertronics provides state-of-the-art pumping and overall golf course irrigation water management solutions.

Prefilters in microfiltration, ultrafiltration, nanofiltration and reverse osmosis processes

by Sistema Azud, S.A.     based in Alcantarilla, SPAIN

The sizing and frequency of cartridge / bag replacement, in cartridge / bag filters used as pre-filters in fine filtration applications depends directly on the amount of suspended solids in the water. The installation of an AZUD system prior to the cartridge /bag filters permits:

  • Decrease in the number of cartridges used – cost savings.
  • Decrease in the amount of labor and maintenance required.
  • Increase in the efficiency of the cartridge.
  • Less down time.

Filtration systems & solutions for porous media & materials

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

Porvair Filtration Group manufacture an extensive range of porous materials to provide optimum solutions for a wide variety of applications. These materials can be purchased for OEM products or we can integrate and package into finished products.

Water Disinfection for Industrial Water Treatment

by MIOX Corporation     based in Albuquerque, NEW MEXICO (USA)

MIOX’s patented Mixed Oxidant Solution (MOS) or Hypochlorite (HYPO)chemistries for cooling tower and cooling loop water disinfection improves safety, lowers general corrosion rates, increases performance, and saves money. The unique qualities of MOS lowers corrosion rates by 80% in copper and 50% in steel, resulting in a reduction of downtime, maintenance, and expense. Additionally, MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining steady disinfection residuals.

Wastewater technology for the oil exploration

by AWAS International GmbH     based in Wilnsdorf, GERMANY

In the production of crude oil the produced water plays a more and more important role in terms of ecology.

Water treatment for muni and industrial

by Lindsay Corporation     based in Omaha, NEBRASKA (USA)

With our network of Municipal manufacturer`s representatives, we provide integrated water treatment, pumping and water management solutions for municipal and industrial applications. We are systems integrators who offer the expertise and flexibility to provide treatment, pumping, controls, monitoring, service and support. We provide an unbiased evaluation of the best capital and operating cost solution for your municipal and industrial treatment, pumping and water management applications. Through our vast network of vendor/partners we have access to virtually every treatment option and provide the best solution to meet the application requirements and goals.

Advanced Ultrafiltration Modules

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

The Q-SEP Ultrafiltration membranes incorporate high-strength, hollow fibers that deliver superior performance without the risk of fiber breaks. They are made from a hydrophilic polyether sulfone material with excellent low fouling characteristics. These hollow fiber membranes operate under a pressurized inside-out flow configuration for superior performance. These hollow fiber UF membranes offer reliable removal of turbidity, microorganisms & viruses. Turbidity can be reduced to less than 0.05 NTU. Typically, a 6-log removal for bacteria, giardia & cryptosporidium, while a 4-log removal for viruses, can be achieved. The Q-SEP modules contain an advanced UF fiber, prepared by an innovative patented cloud point precipitation method. This method ensures a very uniform pore size distribution and high pore density in the membrane. As a result, the product water quality from the modules is significantly better than the quality from conventional UF modules at a very operating pres

Need help finding the right suppliers?

Let the XPRTs do the work for you