plastic-to-hydrocarbon Articles

  • Plastics Recycler Increases Capacity with WEIMA Shredder

    Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...


  • Continuous water recycling for reusable plastic containers

    Abstract The pilot study and full scale installation of UF-RO based System to recycle around 75% of wastewater from plastic pallet washing facility is described. The installed System had several issues that had to be resolved. Cooling tower was installed to cool water to below 85 o F. Ion exchange Systems were installed after the UF membranes to remove iron and silica. Multiple filtration ...

  • Upgrading of plastics with TITECH autosort 4 at Balsamo Reciclagem, Brazil - Case Study

    Balsamo Reciclagem upgraded its plant with the installation of the innovative TITECH autosort 4 optical sorter. Thanks to this equipment, the company managed to increase material processing speed and ...


    By TOMRA Sorting GmbH.

  • Plastics recycler increases capacity with WEIMA shredder case study

    Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...


    By WEIMA

  • A world first for plastic sorting thanks to TOMRA Sorting UK

    Overview In late 2010, ECO Plastics issued TOMRA Sorting UK (TOMRA) with one of the most demanding sorting challenges it had ever encountered. In order to supply a large independent bottler with recycled plastic for all its plastic packaging in the UK, ECO Plastics needed to provide a consistent supply of super-clean recycled PET (rPET) flakes to a level that had never been achieved before. ...


    By TOMRA Sorting GmbH.

  • Pet Recycun6 Plant Opens in Germany

    German plastics recycling company TM Recycling has invested about €10 million ($13.4 million) to build a new PET plastics recycling facility. Construction of the plant is associated with the formation of PFR Nord GmbH in Hohenwestedt TM Recycling, along with AFA Nord GmbH, are a part of the German company Mensing Group, headquartered in Germany. The facility has been operating since June ...

  • Additives mixing effect fuel consumption

    Additives are an instrument of fuel operational development properties which can’t be provided with the previous stages of fuel producing. They lead to product correction, instead of participate in the main method of production. Their efficiency is caused by chemical structure, structure of a basic base, mutual influence and additives mixing process. Improvers which affect some parameters ...


    By GlobeCore GmbH

  • Additives mixing effect fuel consumption

    Additives are an instrument of fuel operational development properties which can’t be provided with the previous stages of fuel producing. They lead to product correction, instead of participate in the main method of production. Their efficiency is caused by chemical structure, structure of a basic base, mutual influence and additives mixing process. Improvers which affect some parameters ...


    By GlobeCore GmbH

  • Waste Water Treatment Plant City of Oakley, UT

    The City of Oakley was very happy with their new MBR facility except for the filter bag sludge dewatering system that was very labor intensive and usually didn’t produce an adequately dewatered sludge. Scott Rogers of Aqua Engineering and Bob Johnson, the Operations Mgr., chose to replace the bag system with a 0.9 meter model DDP belt press system from BDP Industries. The DDP belt press ...


    By BDP Industries

  • Pressure Washing Equipment for Temperature Control

    Pressure washing equipment with heating capabilities has one advantage over non-heated pressure washing equipment. These machines can use hot as well as cold water. Therefore, when purchasing pressure washing equipment, it is always a good idea to purchase machines that allow for temperature control. Hot Water Applications Hot water cleans where cold water cannot. Heat acts on ...


    By Daimer Industries Inc.

  • Case study - PFR Nord GmbH - PET recycling plant

    Customer The Mensing Group of Companies in Hohenwestedt (Germany) invests almost € 10 million in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the formation of PFR Nord GmbH in Hohenwestedt. About 30 new jobs have resulted there. On the whole, Mensing Group, which also includes AFA Nord GmbH and TM ...

  • Turnkey solution for Gaskell Bros

    Gaskell Bros, based at Winwick near Warrington, have experience in both the quarrying and recycling sectors. Their site, originally a quarry, is now used for landfill and recycling.The majority of material brought in is building, demolition, and public service waste from the surrounding Liverpool, Manchester, and Leigh areas. Gaskell directors Mike Broad and Mark Gaskell saw an opportunity for ...


    By CDEnviro

  • New PET recycling plant at PFR Nord

    The Mensing Unternehmensgruppe in Hohenwestedt (Germany) invests almost 10 million Euros in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the new foundation of the PFR Nord GmbH in Hohenweststedt, where almost 30 new workplaces have been created. Altogether, the Mensing Group, which also includes the AFA Nord GmbH and the TM Recycling ...

  • Latest CDE plant installed in Trinidad

    In November 2006 a CDE Sand Washing Plant was installed with the Sampete Group based in Wallerfield Armia, Trinidad. Before this installation the raw material had been stockpiled as waste, compromising the efficiency of several limestone quarries in the east. It provided a considerable challenge for traditional systems as it is overburden mixed with clay-bound material which is extremely plastic ...


    By CDEnviro

  • Use a Car Detailing Equipment for Cleaning Engines and Tires

    A car detailing equipment is widely used in the car wash industry for different types of applications, ranging from cleaning the exterior surfaces of the cars to washing interiors, such as seat covers. Depending upon their use, each type of a car detailing equipment has a particular set of features. Buyers should pay attention to these features to select the best machine for your car detailing ...


    By Daimer Industries Inc.

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • Summary and Conclusions of the Study

    Background and objectives According to 'Affald 21', the Danish national waste plan for the period of 1998-2004 (Ministry of Environment and Energy, 1999) recycling of household waste should be increased over the coming years. The plan is focused on increasing sorting and collection from the households, in which glass is one of the fractions.The first objective of this project is to examine ...


    By 2.-0 LCA consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you