Wastewater Collection Equipment For Water And Wastewater Available In Bosnia & Herzegovina
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model MRB200H3 Tritium collection system consists of a three 20 ml vial bubbler train for collection of tritium in water vapor. A diaphragm pump with an automatic flow control mechanism utilizing the F&J digital flowmeter system is provided. Typical flow range is 75 to 200 sccm (other flow range options are available). Real-time data download is available through the RS232 port. An ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Complete automaton sludge dewatering cycle. It has an automatic cake shaking system. Maximum filtering surface 1.5m² to 132.3m². Number of plates: 5 to 35. Plate size: from 470mm to ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model KH3-200 Tritium collection system consists of a three 125 ml bubbler jar train for collection of tritium in water vapor. A diaphragm pump with an automatic flow control mechanism utilizing the F&J digital flowmeter system is provided. Typical flow range is 1 to 5 SLPM (other flow range options are available). Recommended sampling rate is 2-3 LPM. Real-time data download is available ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation in pipes up to 5000 mm ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen SewerSeal F-170FS is a fast setting cementitious calcium aluminate repair mortar for use in wastewater collection and treatment systems. It develops strength very rapidly and is primarily used as a deep patch repair material or as a restoration lining. F-170FS combines 1 00% calcium aluminate cement with finely graded inert aggregate, thereby offering notable corrosion resistance to ...
-
PremiumManufactured by ZetaÅŸ Kimyabased in TURKEY
Oil separators are a product used in many sectors and produced to separate different variations of oils. It is used to separate the oil entering the network from the water. Oil separators can be produced from various materials. Examples of these are AISI 304 and HDPE. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model MRB200H3E Tritium collection system consists of a three 20 ml vial bubbler train for collection of tritium in water vapor. A diaphragm pump with an automatic flow control mechanism utilizing the F&J digital flowmeter system is provided. Typical flow range is 75 to 200 sccm (other flow range options are available). Real-time data download is available through the RS232 port. An ...
-
PremiumManufactured by Trace2o Ltd.based in UNITED KINGDOM
Essential water quality parameters such as pH, conductivity. TDS, dissolved oxygen and ORP are evaluated to assess water, in terms of suitability for human consumption and to determine wastewater treatment efficiency. Water samples collected for the purpose of quality testing become unstable when removed from source, which means rapid testing is essential for accuracy. On site testing therefore ...
-
PremiumManufactured by Reef Industries, Inc.based in USA
As part of our endeavor to stock and supply the highest quality products, Reef Industries is proud to provide our Bulkhead Fittings to our customers. This 3/4" NPT threaded fitting is designed and intended for use in the field to add a drain/fill line to a container. Prior to applying the bulkhead fitting, one should locate where the bulkhead fitting is needed, cut the opening, and then tighten ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For ultrasonic flow measurement of slight to heavily polluted media in part filled an full pipes and channels. Complete measurement system in connection with KDA ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell and free configurable measurement range via ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The SmartGuard Collector Monitoring System for rectangular clarifiers identifies collector system overloads that cannot be detected by traditional shear pin or torque monitoring devices. SmartGuard’s strategic placement allows it to monitor regular motion, warn of potential danger, and shut down the system before damage can occur. This cost-effective, early detection approach helps ...
-
PremiumManufactured by KISTERSbased in GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Rotary scum skimming troughs are the most economical method for removing all grease, scum, and other floating materials from the water surface in rectangular clarifiers. Scum troughs can rotate up to 75 degrees both forward and backward to accommodate changes in water level and collect surface material from either side of the trough. Slotted weirs are cut longitudinally along the top of the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 1018 Series Syringe Sampler Rosette®, is a water sampling system which utilizes 10cc or 60cc, glass or disposable syringes to collect a discrete water sample at any depth. The system is available to accept 12 or 24 syringes. A tubing cluster may be installed on the syringes in order to precisely position where the sample is to be taken. Syringe installation and removal is simple and ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The Wolverine Brand Plastic Manhole Inflow Protector Inserts are made of high density polyethylene and have been proven effective in reducing or preventing surface water inflow to the collection system, through the manhole lid. Operating and maintenance costs for plant equipment and pumps are minimized due to reduced flow during heavy rainfall. Also, utility costs are reduced because machinery is ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement in slight to heavily polluted media. Designed for fastening in pipes using a ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. Medium measurement range for levels up to ca. 1m. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. POA flow velocity sensors are suitable for ...
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 905V is a pharmaceutical headspace oxygen analyzer. Use it for headspace oxygen analysis in pharmaceutical products – vials, blister packs, bottles, or difficult tubes of products (such as cosmetics). Achieve results with as little as 1cc of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you