process water industry Articles

  • Industrial Wastewater

    Industrial wastewater treatment covers the mechanisms and processes used for water treatment where has been contaminated in some way by industrial or commercial activities before wastewater is released into the environment or reused. Recent trend in the developed world is to minimize the production of wet waste like water or something else and to recycle such waste during the production process. ...


    By Horizon Water Co., Ltd.

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Influence of the reflux ratio in a distillation column in the unsaturated polyester resins process

    The Mexican chemical industry is facing new standards of ecological protection regulated by SEMARNAP (Department of Social Development) and norms imposed by SE (Department of Energy) that require the industry to adjust their processes to use the minimum amount of energy. In particular, the industries that create polyester resins from glycols generate streams of polluted liquids, which are causing ...


    By Inderscience Publishers

  • Thermodynamic modelling of a membrane distillation crystallisation process for the treatment of mining wastewater

    Membrane distillation (MD) could be applicable in zero liquid discharge applications. This is due to the fact that MD is applicable at high salinity ranges which are generally outside the scope of reverse osmosis (RO) applications, although this requires proper management of precipitating salts to avoid membrane fouling. One way of managing these salts is with MD crystallisation (MDC). This ...


    By IWA Publishing

  • Processing Wastewater through Reed Beds: BHP Steel Long Products Division

     In the semi-arid region surrounding Whyalla in South Australia, BHP is creating an artificial wetland that promises to make its effluent cleaner than its input water. The wetland is projected to cost around 40% of a conventional treatment works, with significantly less operating costs. The project will conserve one of the most precious resources in the world’s driest country - water - and ...


  • Sugar Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Case study - Biomedical industry wastewater treatment

    The Client The Client is part of one of the most relevant Italian company developing and producing medical units for human blood treatment and purification at a European level. More in detail, units are particularly employed for kidney failure healing through dialysis. Since the beginning of its activity, the company played a key role for the development of the so-called CRRT ...


    By EVALED-Evaporator

  • Industrial Wastewater Treatment: Priority pollutant behaviour in on-site treatment systems for industrial wastewaters

    The majority of wastewaters deriving from the chemical industry consist of aqueous discharges produced during the physico-chemical processing of synthetic mixtures involving operations such as filtration, centrifugation, extraction and/or distillation. The wastewater streams, referred to as ‘process waters’ can include mother liquors, washing waters from the purification of products, ...


    By IWA Publishing

  • Ground Zero for Industrial Parts Cleaning Discharge - Case Study

    PROCECO helps the R.H. Sheppard Co. attain zero waste after parts cleaning. RH Sheppard purchased a PROCECO Eco-Smart MVR (Mechanical Vapor Recompression) evaporator with a goal of doubling their wastewater processing capabilities. Their new system replaces an obsolete and energy-consuming evaporator. The PROCECO Eco-Smart uses a low-energy distillation method that generates a ...


    By Proceco Ltd.

  • Pipeline Compressor Station Evaporates Storm Water

    Contaminated wastewater is one of the most problematic and potentially expensive issues for industry today.  Hauling wastewater can be expensive and may expose the company to substantial liability.  On-site processing can involve extensive fees and time-consuming paperwork.  Fortunately, there is a solution.  Evaporation is a practical, environmentally sound, and economical ...


    By Samsco Corporation

  • KSB - H2O collaboration project: Reduce costs and improve quality of industrial wastewater treatment

    A Clearcat evaporator at KSB in La Roche Chalais (France) for the treatment of industrial wastewater on site. The KSB factory at La Roche Chalais (24), a subsidiary of Germany's KSB AG, manufactures AMRI brand butterfly valves. These valves are used in the construction, industrial, water, and electric power generation sectors. The production of these valves generates two main liquid wastes: ...


    By H2O GmbH

  • Case-study - Utilising waste heat for water production and climate control

    Water purification is needed to produce high quality water for consumption, agriculture and industrial needs. Conventional water treatment processes, like distillation and reverse osmosis, consume vast amounts of energy. However, there is a large potential for significant reductions in energy consumption and CO2 emissions in this sector. It can be achieved by the exploitation of waste heat for ...


    By Climate-KIC

  • Energy evaluation and treatment efficiency of vacuum membrane distillation for brackish water desalination

    Strict environmental regulations have led to the rapid development of membrane separation technologies for the production of potable water, for industrial water supply, and for the reuse and discharge of treated wastewater. Promotion of water recycling and the provision of potable water from brackish water prevent significant negative effects on the environment and drinking water supplies. This ...


    By IWA Publishing

  • Membranes and theoretical modelling of liquid–gas membrane separation for aromatic compounds removal from water: a review

    Liquid–gas membrane separation techniques - namely, vacuum membrane distillation, membrane air–stripping/sweeping and pervaporation - are non–equilibrium membrane separation processes emerging for the removal of aromatic compounds from industrial wastewater and polluted ground waters. This review focuses on polymeric hydrophobic membranes which are commonly employed in the liquid–gas membrane ...


    By Inderscience Publishers

  • Evaporation stills fear of chelates and heavy metals - Reliable treatment of rinsing water from zinc

    Zinc nickel plating is the state of the art corrosion protection method for stainless steel. In the automotive industry as well as in the mining and in the production of windmills it replaces old processes like alkaline zinc plating for instance. The electrolytes used in zinc nickelplating contain highly concentrated chelating agents. This makes treatment of such industrial wastewater ...


    By H2O GmbH

  • Sterile wastewater treatment with vacuum distillation

    Hygiene requirements are growing increasingly strict in many sectors, and the treatment of industrial wastewater is no exception. The vacuum distillation process in particular has to deal with the question of sterile treatment and subsequent storage of water obtained from the process. The mere possibility of reintroducing wastewater into the production process makes it imperative to prevent ...


    By H2O GmbH

  • MVC technology to recover oil from SAGD facility

    The Facility The SAGD Facility is called “Orion” and consists of 4 major processes: Steam Generation, Injection/Recovery Wells, Deoiling and Water Purification, for recovery of oil. The Players Aquatech will be working alongside Shell Canada (formerly BlackRock Ventures), the developer and IMV Projects, the integration engineers. ...

  • What is Wastewater?

    What is wastewater? Wastewater, the waste discharge that first comes to mind in any discussion of stream pollution, is the discharge of domestic wastewater, which contains a large amount of organic waste. Industry also contribute substantial amounts of organic waste, some of which comes from vegetable and fruit packing; dairy processing; meat packing; tanning; processing of poultry, ...

  • Adsorption of reactive dye from aqueous solution and synthetic dye bath wastewater by Eucalyptus bark/magnetite composite

    In the present study, Eucalyptus camaldulensis bark/magnetite composite (EBMC) was used for a potential application as a low-cost adsorbent for the removal of Reactive Black 5 (RB5). The adsorption experiments were performed with aqueous solution (RB5 + distilled water) and synthetic dye bath wastewater (SDBW) in order to investigate the potential application of EBMC in the textile industry. ...


    By IWA Publishing

  • Direct contact membrane distillation for nuclear desalination. Part I: Review of membranes used in membrane distillation and methods for their characterisation

    Membrane distillation (MD) is a relatively novel membrane technology considered by the researchers as a potential method for seawater desalination. In the first issue of this journal, the possibility of nuclear desalination by MD was discussed comparing various MD configurations. The present paper firstly reviews the membranes used in MD and the methods of their characterisation, among them ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you