Wastewater Grit Equipment For Water And Wastewater Available In Europe
-
Manufactured by Esmil Groupbased in POLAND
Complex solution for mechanical wastewater treatment for plants of small and medium capacities. It’s a compact module that provides all pretreatment stages and ensures the effective removal of waste, sand and grease from ...
-
Manufactured by Definitive Ecologybased in ITALY
In Definitive Ecology’s grit treatment system the grit slurry is fed through an inlet flange into a tank in which the solid particles are settled. Floating particulate is removed also thanks to special flow deflectors and the layout of the inlet and discharge flanges. The grit is lifted to the discharge port by a screw with reduced rotation speed. The grit is dewatered while it is being ...
-
Manufactured by Tuke & Bell Ltdbased in UNITED KINGDOM
The Tuke and Bell Vortex Grit Trap works on the retention, constant velocity and forced vortex principles. A specially designed Paddle rotates in the same direction as the sewage providing a constant velocity of flow. A spiralling flow is created by the paddles to keep organic material in suspension and also creates a vortex in the lower half of the chamber to draw grit particles down to the ...
-
Manufactured by CST Wastewater Solutionsbased in AUSTRALIA
The unit can perform both grit classifying and grit washing. The mixture water, grit and organic enters by a vortex type inlet imposing to the particles a rotating velocity. While entering the settling tank that velocity must ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The grit trap design and layout is fully compliant with international standards. As a pre-packaged, free standing system, civil requirements and reduced. The horizontal grit conveyor transports the separated grit particles to the inclined grit removal screw installed within the grit trap. The inclined screw dewaters and discharges the compacted material into a container or a subsequent optional ...
-
Manufactured by Fraser Pump and Engineering Limitedbased in UNITED KINGDOM
Range of mini and Grit Blasting systems. Part No: IAP These are portable units of robust design: Options Include Storage Capacity: 25L - IAP25, 50L - IAP50, 75L - ...
-
Manufactured by WSG & Solutions, Inc.based in USA
The Link-Belt Type AS Grit Collector is designed for small plants with flows up to 10 MGD. The unit consists of a hopper with an inclined screw and grit washer for removing and washing grit. Air is provided to maintain uniform velocities at all flows. The unit uses compressed air through diffusers to create and maintain circulating velocities of 1 to 2 fps. This produces optimum conditions to ...
-
Manufactured by WSG & Solutions, Inc.based in USA
The Link-Belt Type ASB Grit Collector will handle flows of 1.5 MGD or more. The system uses a longitudinal screw in the bottom of the chamber to move the grit to a bucket elevator which lifts it to a discharge point. A type SW grit washer is used to wash and dewater the collected grit. The Type ASB Grit Collectors are available with Swingfuser aerators which provide maintenance accessibility to ...
-
Manufactured by Grimmel Wassertechnik GmbHbased in GERMANY
The Cylindrical Grit Separator Compact Unit WS provides the complete mechanical pre-treatment, screenings removal and treatment as well as the extraction of grit and grease all-in-one. All this saves up to 50% of space compared to conventional compact systems and with the same sand separation performance plus a much better operational accessibility. It is extremely low-maintenance with low wear ...
-
Manufactured by SAVI S.r.l.based in ITALY
DSP Grit Traps are designed to remove grit from sewage in waste water treatment plants. The DSP Grit Trap is used to remove sand from sewage in waste water treatment plants. The equipment consists of a drive unit complete with a central bearing, two steel blades operated by an impeller and a central air lift ...
-
Manufactured by PMC Engineering Turkeybased in TURKEY
Available for up to 13m wide and 50m long tanks. Grit removal device. Scum removal device. Control ...
-
Manufactured by Wessels Companybased in USA
Wessels type TXA tanks are ASME replaceable bladder type pre-charged thermal expansion tanks for commercial and industrial potable hot water applications. They are designed to be installed between a backflow preventer and a hot water heater so it can accept the expanded volume of hot water and keep the system pressure below the relief valve setting. The water is contained in a butyl bladder. All ...
-
Manufactured by PWL GmbH & Co. Anlagentechnik KGbased in GERMANY
Our drum filter MDF with screen fabrics between 55 and 2000 µm mesh size offers a high separation performance at low operating costs in continuous operation. The choice between different cleaning media is part of the adaptation to the respective operating conditions. There are also different discharge devices and the level-controlled drum rotation . ...
-
Manufactured by Finnchain Oybased in FINLAND
Finn chain’s grit collector removes the sand from the bottom of the tank to a removal channel. In the grit collector system, special solutions have been developed for the scraper flights and rails for them to endure the abrasion of sand. Grit collectors are customised according to the client’s tanks and process ...
-
Manufactured by Picatech Huber AGbased in SWITZERLAND
The grit trap design and dimensioning are fully compliant with international standards. The ROTAMAT® Ro6 is available as an aerated or unaerated unit. The decision on when to use the aerated or unaerated option is for example the specific ratio between the storm and dry weather flow and if any further grit treatment facilities are installed or ...
-
Manufactured by FSM Frankenberger GmbH & Co. KGbased in GERMANY
The unit can be charged via air jet lift, pump or free flow. The FSM grit classifier consists of a separating container and a screw conveyor. Application areas range from municipal sewage plant to separation of sediment and heavy materials in production and process waste water in the chemical, food, paper and waste disposal industries. The grit separator provides high performance coupled with low ...
-
Manufactured by UT Pumps & Systems Private Limitedbased in INDIA
Removal of Paint from Paint shop grits is being done manually by the following conventional methods which are time consuming and not effective. Removing the grits from paint booth. Transport the grits from paint booth to a distant place (As it involves lot of pollutions). Burning / Scrapping the grits. Wash the grits with water. Transport back the grits to paint booth. Fix the grits in the paint ...
-
by IETOSbased in EGYPT
Sand silos are a maintenance free approach to minimize the moisture content of the separated grit from pretreatment systems. Sand silos are static with no moving parts, customized design based on centrifugal force to separate small sized particles from water to achieve minimum moisture content of ...
-
Manufactured by Trucentbased in USA
Industrial and commercial laundry waste water is produced from laundry facilities that wash uniforms, towels, floor mats, mops, etc. Often, these items are washed on a daily basis by industrial laundry facilities. The laundry waste water generated contains sand, grit, lint, oil, grease, heavy metals, and volatile organic compounds (VOC’s). This industrial laundry waste water must be cleaned ...
-
Manufactured by Smith & Loveless Inc.based in USA
The SONIC START® STREAMLINE™ jacket provides freeze protection for the priming dome and solenoid valve, while the PISTA® Pinch Valve jacket keeps the bladder in the pneumatic pinch valve flexible for more dependable winter-time operation. Both jackets are recommended for all outside PISTA® grit removal system installations with Top-Mounted PISTA® TURBO™ Grit Pumps. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you