Wastewater Heat Equipment For Water And Wastewater Available In Chad
-
Manufactured by Oil Skimmers, Inc.based in USA
The Oil Skimmers Model 5H is designed for efficient oil removal in areas where the unit can be located within 3 feet of the water level. The “H” stand for “horizontal” in that the tube operates horizontally. This unit is used for above-ground tanks, parts washers, and other applications where the skimmer can remain within 3 feet of the skimming area. Also similar to our ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, ...
-
Manufactured by Ecogenerazione Srlbased in ITALY
Vacuum evaporators with external jacketed exchanger and internal scraping system. Heat pump vacuum evaporator with external jacketed exchanger; ideal for solutions with high quantities of dissolved solids. Vertical evaporation body with perimeter jacketed exchanger and internal scraping system. The continuous scraping action maintains a good thermal exchange, even in case of viscous or encrusting ...
-
Manufactured by ASA Srlbased in ITALY
Asameters model C/G …47 _ 50 all made of stainless steel are designed for applications in potentially explosive areas thanks to their flameproof design, certified ATEX Ex ia IIC T4, T6… Zone 0 and Zone 1 (on request). They are suitable for medium and high flow rates with any type of gas (mod. C) or liquid (mod. C/G) also aggressive at extreme process and environmental conditions ...
-
Manufactured by EnviroSep Incbased in USA
Envirosep WWDS-HTS, Wastewater Digester Sludge Heating System is a UL-Listed, factory manufactured and tested system used in biological wastewater treatment plants for maintaining sludge temperature in the anaerobic digester. The indirect heating method is employed, with a sealed-in primary water circuit, combined with an internal heating coil eliminates corrosion, scaling, and sludge baking. ...
-
Manufactured by WTE srlbased in ITALY
The silicone membranes are applied in industrial wastewater or when the heat is an issue. Unlike the EPDM, silicone is an inorganic material therefore is not attacked by microorganisms. Two membrane perforations are available: 1-1 1,5-1,5 and 2-2,5. The threaded connection is a NPT 3/4″ ...
-
Manufactured by Huzhou Dapu Stainless Steel Co., LTD.based in CHINA
Superior resistance to general and local corrosion, especially to stress corrosion, pitting corrosion, crevice corrosion, corrosion fatigue and abrasion & corrosion. Good weldability. Good mechanical properties. Excellent intergranular corrosion resistance. High cost-effectiveness, longuseful time. The products are widely used in: Electric power / Ocean Engineering and ship building / ...
-
Manufactured by SOFAME Technologies Inc.based in CANADA
The LAUNREC RBT is a complete heat reclaim system which recovers the energy contained in the waste water of industrial laundries and textile dye houses. The recovered energy is used to preheat a secondary water stream to within 8°F (4.5°C) of the waste water ...
-
Manufactured by ProSonix LLCbased in USA
I-Series Direct Steam Injection with Angled Jet Diffuser. Applications: Fibrous slurries, biomass, biogas, municipal & industrial sludge heating, and aggressive fluids that are difficult to ...
-
Manufactured by MDSJ Impiantibased in TURKEY
MDSJ ENVIRONTEC DY Series Vertical Countercurrent Packing Wet Scrubber is specifically designed for the effective cleaning of corrosive, harmful and/or irritating gases from process or ventilation air streams. The airflow into the Packing Wet Scrubber is first brought into contact with the wash solution as it enters the bottom of the packed tower and then rises vertically. A spray head placed ...
-
Manufactured by Pick Heaters, Inc.based in USA
Same trusted features and benefits of standard models...but for flow rates, pressures or material of construction that are outside the standard design. In fact, flow rates of up to 25,000 GPM (5680 m3/Hr.) are available. High pressure designs (ANSI Class 900 PSIG, or DN 900 / PN 260) and above. Specialty heaters can also be made in special alloys such as…AL-6XN, Hastelloy, Duplex 2205, ...
-
by AirDep Srlbased in ITALY
EQUIPMENT TYPE: Stripping plant is composed with a stripping tower and a chemical scrubber. APPLICATION: The stripping plants TS-ST series are used for the treatment and removal of a contaminant from ground or surface waters, from landfill leachate or from liquid digestate from biogas plant. The contaminant is transferred from the liquid phase to the gas phase (air or steam), if required the air ...
-
Manufactured by MDSJ Impiantibased in TURKEY
ENGINEERING DY Series Vertical Countercurrent Packing Wet Scrubber is specifically designed for the effective cleaning of corrosive, harmful and/or irritating gases from process or ventilation air streams. The airflow into the Packing Wet Scrubber is first brought into contact with the wash solution as it enters the bottom of the packed tower and then rises vertically. A spray head placed over ...
-
Manufactured by Tricel (Killarney) Unlimited Companybased in IRELAND
Tricel offer a comprehensive range of total pumping solutions, either through a prepackaged pump set or by designing and manufacturing to specific demands of your project. Our skilled team of specialist engineers can design, assemble and install pump sets to meet your requirements, either prepackaged or individually specified. ...
-
based in THAILAND
GWE’s direct fire wastewater heater unit, CALORIX, is a new development for efficient wastewater heating without the use of heat ...
-
Manufactured by Ecogenerazione Srlbased in ITALY
Heat pump vacuum evaporators with immersed coil exchanger; Heat pump vacuum evaporator; ideal to concentrate water-based solutions. Vertical evaporation body, with easy-to-inspect coil exchanger. Heat pump circuit that can activate the low-temperature evaporation process. Completely automatic and remotely monitored operation 24/7. Standard execution: AISI316 or special alloys on request. Standard ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for general applications with conductive liquids (≥5 μS/cm) and lower solid content (up to 10%). Unlike the basic device OPTIFLUX 1050, the OPTIFLUX 1100 offers a better accuracy. It is suitable for use in various industries – from water, ...
-
Manufactured by Eco-Techno SRL.based in ITALY
Distillation throughput from 10 to 42 L/hour. Low temperature vacuum evaporator with heat pump, powered with electrical energy able to reach extreme concentration. Specially configured to obtain semi solid concentration and to concentrate fouling wastewater, saline water and high density waters. To be installed wherever an extremely strong concentration is required. Suitable for ZLD installation, ...
-
Manufactured by Apator S.A.based in POLAND
The electromagnetic flowmeters FLOQUA are measuring devices designed to measure the flow of electrically-conductive liquids with a conductivity greater than 5 μS/cm in closed pipeline installations. ...
-
Manufactured by ProSonix LLCbased in USA
PSX I-Series Inline Heater with PSX Jet Diffuser. Applications: Water heating, slurry heating, hi-viscosity & hi-solids fluids & ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you