We couldn't find any wastewater heat equipment suppliers or service providers located in Arkansas

Here is a list of equipment results with suppliers serving Arkansas

Wastewater Heat equipment for Water and Wastewater available in Arkansas

  • Multiplexx - Model PVCP - Liners

    More effective in resisting corrosion than competing trenchless lining solutions. Proven superior in acid resistance to other technologies in tests conducted by the Sanitation District of Los Angeles County, MultiplexxTM PVCP Liners from Terre Hill Composites add years of utility to aging sewer structures while saving you tens of thousands of ...

    By Terre Hill Composites, Inc. (THC) based in Ephrata, PENNSYLVANIA (USA).

  • Water Vapor Recovery Condenser

    The standard water vapor recovery condenser is constructed of a series of fined tube coils mounted in a stainless steel enclosure through which the water vapor from the evaporator is pulled by a blower. The enclosure drains by gravity to a receptacle, drain line or circulating loop. Cooling water is circulated through the fined tube coils to ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • E-600 H/O Hot Bottom Wastewater

    Lakeview Hot Bottom models are steam heated wastewater evaporators. The steam chamber is an A.S.M.E. “U” stamped pressure vessel rated to 150 psi. Steam is supplied by a plant boiler, steam generator, or a packaged boiler system dedicated for evaporation. Steam is the energy of choice where possible as it offers unparallel energy versatility, ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • E-600 Hot Shot Wastewater

    Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available. The external side mounted heating elements never contact the ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • E-200 Hot Shot Wastewater

    Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available. The external side mounted heating elements never contact the ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • Water Eater - Model 85E - Wastewater Evaporator

    The Water Eater Model 85E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. It comes in two models, the Model 85E Carbon Steel version and the Model 85E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS). Installation is easy consisting of only an ...

    By Equipment Manufacturing Corporation (EMC) based in Santa Fe Springs, CALIFORNIA (USA). from Wastewater Evaporator Product line

  • Ohaus - Model MB23 - Moisture Analyzer

    The MB23 provides precise moisture content determination at an unbeatable value. With a large backlit LCD display, standard RS232 port, 110g capacity with a readability of 0.01g/0.1% and an non-glass infrared heating element, the MB23 offers moisture analysis for any budget.

    By OHAUS Instruments based in NEW JERSEY (USA). from Moisture Analyzer Product line

  • ICM - Bio-Methanator

    ICM's Bio-Methanator methane digestion systems can reduce a facility's carbon footprint, reduce wastewater discharge and disposal, and reduce energy use and water consumption. Our systems are ideally suited to retrofit existing food and beverage, ethanol production, and dairy production facilities. Skid-mounted modules are fabricated in our ...

    By ICM, Inc. based in Colwich, KANSAS (USA).

  • Kemco - Direct Contact Water Heater

    Kemco designs, engineers and manufactures full integrated water systems to match your plant requirements. Water heating is simply the first step in unsurpassed fuel savings, wastewater heat energy reclamation, water conservation, and sewer cost savings. All, full-matching components of a fully integrated system.

    By Kemco Systems, Co. LLC based in Clearwater, FLORIDA (USA).

  • Kemco - Wastewater Heat Recovery System

    Kemco's Wastewater Heat Recovery System recovers potentially lost thermal energy by capturing the heat from the wastewater and using it to preheat the incoming fresh water. These wastewater heat recovery systems are extremely efficient and can be designed to provide up to a 5°F 'approach'.

    By Kemco Systems, Co. LLC based in Clearwater, FLORIDA (USA).

  • Vapor Compression Distillation System

    VAPOR COMPRESSION DISTILLATION is a system that treats industrial process water and waste-water streams. The System combines the benefits of distillation with those of vapor compression to greatly lower the cost of distillation for removal of water or concentration of other ingredients. It can be used for a broad range of applications and provides ...

    By Environmental Recycling Alternatives, Inc. based in High Point, NORTH CAROLINA (USA).

  • Model FN Series - Sewage/Effluent Submersible Pumps

    The FN Series contains the following features: A precision manufactured motor is achieved utilizing the highest standard of quality control, to ensure stable characteristics and the highest efficiency. All rotor adapt heat treatment method for drive shaft assembling and stator winding impregnated with varnish and heat dried in the industrial oven. ...

    By HCP Pumps America, Inc based in Foley, ALABAMA (USA). from Sewage/Effluent Submersible Pumps Product line

  • E-300 Hot Shot Wastewater

    Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available. The external side mounted heating elements never contact the ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • E-1500 H/O Hot Bottom Wastewater

    Lakeview Hot Bottom models are steam heated wastewater evaporators. The steam chamber is an A.S.M.E. “U” stamped pressure vessel rated to 150 psi. Steam is supplied by a plant boiler, steam generator, or a packaged boiler system dedicated for evaporation. Steam is the energy of choice where possible as it offers unparallel energy versatility, ...

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA).

  • Model AC R Series - Hot/Cold Water Scraped Vacuum Evaporators

    Designed to treat a high concentration of solids, Evaled® AC R often follows a primary evaporator in series to provide further concentration or crystallization of the concentrate.

    By EVALED-Evaporator based in Zoppola (PN), ITALY. from Hot/Cold Water Scraped Vacuum Evaporators Product line

  • Vacuum Concentrators

    The evaporators vacuum concentrators Water Energy use the combined effect of the vacuum and heat pump to obtain the distillation of aqueous solutions at low temperature (ca 30 ° C). In this way, you can greatly reduce the volume of waste for disposal (concentrate) and recovering the purified water (distilled) within the production cycle. In ...

    By Water Energy Group based in S. Pietro in Casale BO, ITALY.

  • Complete Gas Conditioning System

    MARCAB, which has been providing quality gas scrubbing systems for wastewater, agricultural and industrial applications since 1970, now offers complete Gas Conditioning Systems. MARCAB has teamed with Columbia Pacific Biogas (CPB) and now offers a full range of gas conditioning options. Columbia Pacific Biogas’ principal owners bring over 70 ...

    By Marcab Company, Inc. based in San Marcos, CALIFORNIA (USA).

  • Model E-100 H/O HS - Hot Shot Wastewater Evaporator

    Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available.

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA). from Hot Shot Wastewater Evaporator Product line

  • Model E-300 HS - Hot Shot Wastewater Evaporator

    Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available.

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA). from Hot Shot Wastewater Evaporator Product line

  • Model E-600 HS - Hot Shot Wastewater Evaporator

    Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available.

    By Lakeview Engineered Products Inc based in Fort Wayne, INDIANA (USA). from Hot Shot Wastewater Evaporator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you