Wastewater Heat Equipment
-
Manufactured by SOFAME Technologies Inc.based in CANADA
The LAUNREC RBT is a complete heat reclaim system which recovers the energy contained in the waste water of industrial laundries and textile dye houses. The recovered energy is used to preheat a secondary water stream to within 8°F (4.5°C) of the waste water ...
-
Manufactured by Kemco Systems, Co. LLCbased in USA
Kemco's Wastewater Heat Recovery System recovers potentially lost thermal energy by capturing the heat from the wastewater and using it to preheat the incoming fresh water. These wastewater heat recovery systems are extremely efficient and can be designed to provide up to a 5°F ...
-
based in THAILAND
GWE’s direct fire wastewater heater unit, CALORIX, is a new development for efficient wastewater heating without the use of heat ...
-
Manufactured by EnviroSep Incbased in USA
Envirosep WWDS-HTS, Wastewater Digester Sludge Heating System is a UL-Listed, factory manufactured and tested system used in biological wastewater treatment plants for maintaining sludge temperature in the anaerobic digester. The indirect heating method is employed, with a sealed-in primary water circuit, combined with an ...
-
Manufactured by Eco-Techno SRL.based in ITALY
Evaporator distillation throughput from 10 to 750 L/hour. Low temperature vacuum evaporator with heat pump, powered with electrical energy. Suitable evaporator for die-casting, electronic and mechanic industries, heat treatment, eluates from resin regeneration RO rejects, food & beverage (electropolished evaporator version available on ...
-
Manufactured by Eco-Techno SRL.based in ITALY
Distillation throughput from 10 to 750 L/hour. Low temperature vacuum evaporator with heat pump, powered with electrical energy. Derived from the ECO VS-HP series, it is configured for the direct treatment of chromic solutions. Ideal for galvanizing. Made in Titanium and acid-resistant resins. Low temperature vacuum evaporator with heat ...
-
Manufactured by Eco-Techno SRL.based in ITALY
Distillation throughput from 20 to 165 L/hour. Low temperature vacuum evaporator with heat pump, powered with electrical energy with internal scraper. Specially configured to treat encrusting water-based solutions, it has an internal scraper to remove fouling and to concentrate up to crystallization fouling wastewater, saline water and ...
-
Manufactured by Eco-Techno SRL.based in ITALY
Distillation throughput from 10 to 42 L/hour. Low temperature vacuum evaporator with heat pump, powered with electrical energy for semi-solid concentrates. Specially configured to obtain sludge, semi solid concentration and to concentrate fouling wastewater, saline water and high density waters. To be installed wherever an extremely ...
-
Manufactured by Eco-Techno SRL.based in ITALY
Distillation throughput from 10 to 42 L/hour. Low temperature vacuum evaporator with heat pump, powered with electrical energy able to reach extreme concentration. Specially configured to obtain semi solid concentration and to concentrate fouling wastewater, saline water and high density waters. To be installed wherever an extremely ...
-
Manufactured by Ecogenerazione Srlbased in ITALY
Vacuum evaporators with external jacketed exchanger and internal scraping system. Heat pump vacuum evaporator with external jacketed exchanger; ideal for solutions with high quantities of dissolved solids. Vertical evaporation body with perimeter jacketed exchanger and internal scraping system. The continuous scraping action maintains a ...
-
Manufactured by Ecogenerazione Srlbased in ITALY
Heat pump vacuum evaporators with immersed coil exchanger; Heat pump vacuum evaporator; ideal to concentrate water-based solutions. Vertical evaporation body, with easy-to-inspect coil exchanger. Heat pump circuit that can activate the low-temperature evaporation process. Completely automatic and remotely monitored operation 24/7. ...
-
Manufactured by WTE srlbased in ITALY
The silicone membranes are applied in industrial wastewater or when the heat is an issue. Unlike the EPDM, silicone is an inorganic material therefore is not attacked by microorganisms. Two membrane perforations are available: 1-1 1,5-1,5 and 2-2,5. The threaded connection is a NPT 3/4″ ...
-
Manufactured by Kemco Systems, Co. LLCbased in USA
Kemco designs, engineers and manufactures full integrated water systems to match your plant requirements. Water heating is simply the first step in unsurpassed fuel savings, wastewater heat energy reclamation, water conservation, and sewer cost savings. All, full-matching components of a fully integrated ...
-
Manufactured by Aashritha Sawas Sysyems LLP (ASSL)based in INDIA
The silicone membranes are applied in industrial wastewater or when the heat is an issue. Unlike the EPDM, silicone is an inorganic material therefore is not attacked by microorganisms. Two membrane perforations are available: 1-1 1,5-1,5 and 2-2,5. The threaded connection is a NPT 3/4″ ...
-
Manufactured by Tomorrow Water is a Company of BKT Co. Ltd.based in USA
Leverage synergistic qualities and have secure access to water supplies. At the core of the innovation is Tomorrow Water’s patent-pending concept of exchanging and reusing wastewater and heat between WRRFs and on-site data centers. As data centers undergo air-cooling, hot air is diverted into the biological treatment and/or sludge ...
-
Manufactured by W-Rix Ltdbased in FINLAND
Waterix COOLIT -cooler is easy to install and service. The efficiency is higher than in cooling towers. Its main applications are cooling of industrial process water and wastewater or heating plant’s turbine waters. Waterix COOLIT coolers has a superb structure that does not get dirty and is maintenance-free, as it does not have any ...
-
Manufactured by W-Rix Ltdbased in FINLAND
Waterix COOLIT -cooler is easy to install and service. The efficiency is higher than in cooling towers. Its main applications are cooling of industrial process water and wastewater or heating plant’s turbine waters. Waterix COOLIT coolers has a superb structure that does not get dirty and is maintenance-free, as it does not have any ...
-
Manufactured by NCH (UK) Ltd.based in UNITED KINGDOM
Heats and loosens debris and grease in drains, but is non-flammable and non-explosive. Creates heat, when added to cold water, (up to 85ºC in 5 minutes) and agitation to loosen debris and to emulsify grease and oil. Produces an even heat over a long period of time, allowing it to attack stoppages that are further down the line. ...
-
Manufactured by DWS BVBAbased in BELGIUM
In the direct-contact water (or wastewater) heater, there is direct contact between the flame, flue gasses, and the water that needs to be heated up. This unique technology is more energy efficient than the traditional water heater or boiler, where there is no contact between and flue gasses. Thanks to that in DWS unit, condensation heat ...
-
Manufactured by Huzhou Dapu Stainless Steel Co., LTD.based in CHINA
Excellent corrosion resistance. Good for cold working or hot working. High plasticity and ductility. Optimum general performance. The products are widely used in: Electric power / Ocean Engineering and ship building / Petrochemical industry / LNG liquefied natural gas/Desalination of sea water/wastewater treatment / nuclear power / heat ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you