Wastewater Mixing Applications available in Indonesia
-
Premium
Technologies for Wastewater Treatment in Dairy Industry
Dairy industry faces the challenge of the disposal of many by-products from the production process, such as Whey, Hot Whey, Buttermilk and cheese processing wastewater. Our cost-effective solutions allow taking advantage of all the by-products, which either are a cost or have low value, thanks to the generation of biogas. The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the ...
By Fluence Corporation based in White Plains, NEW YORK (USA).
-
Static pipe mixers, open channel mixers and enclosed duct mixers for water and wastewater treatment applications
Statiflo has the most extensive range of Motionless Mixers, for pipes and open channels, suitable for blending, dosing and gas / liquid mass transfer applications in: Municipal and industrial water treatment, Municipal and industrial wastewater treatment. Statiflo’s unique customised approach to static mixer design provides the most effective mixing solutions for both new treatment plants and retrofits to existing plants in an industry wide trend away from continuously stirred ...
By Statiflo International Ltd. based in Macclesfield, UNITED KINGDOM.
-
Turbo blower ZCJSD
Turbo blower ZCJSD is widely used for waste and wastewater ...
By Turbo Blower ZCJSD - Shijiazhuang Kingston Bearing Technology Co, Ltd based in CHINA.
-
Water treatment and mixing equipment for Wastewater systems
Let's face it, wastewater is a tough, nearly thankless business. A lot can go wrong and before you know it, you're in violation. Regulations ever increase, compliance becomes more difficult, and odors get the phone ringing. Equipment breaks down. Energy costs go higher & higher. ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Pulsair`s industrial mixers for liquid mixing - water & wastewater industry
Pulsair Systems offers the most effective and low energy cost solution for liquid mixing. Our proven mixing process is up to 70-90% more energy efficient than traditional mixing methods and addresses all the major challenges associated with mixing most any type of liquid regardless of its ...
By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).
-
Mixers - Industrial Agitators for Wastewater Treatment
WATER TREATMENT IS A COMPLEX SEQUENCE OF PROCESSES AND REACTIONS. Each stage of the wastewater process is dependent on the previous. This interdependency is critical to our approach to designing mixers for you. The quality and control of the overall wastewater process depends on it. We have decades of experience designing mixers for wastewater treatment. As a result, our mixers are designed for the intricate needs of your wastewater treatment processes. ...
By Dynamix Agitators Inc. based in Richmond, BRITISH COLUMBIA (CANADA).
-
Wet well mixing for lift / pump stations
Working with lift station wet wells can be a tough, thankless job & some things are just inevitable... Disposable wipes will clog pumps, pipes, & other equipment. Fats, oils, & grease (FOG) will forever be an ongoing problem. These two issues alone can add thousands to millions of dollars to your operating budget; however, there is a cost efficient solution to help you manage. The GridBee AP500 wet well mixer keeps keeps it mixed and helps your grinder pumps do a better job passing through wipes & ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Potable Water Storage Tank Mixing
Inadequate potable tank mixing is a persistent problem for many municipal water systems across the United States, Canada, & the world. Simply put, tanks need consistent, effective, and reliable mixing. Test sample inconsistencies, thermal stratification, inconsistent water age, low disinfectant, and other DBP issues can all be mitigated with complete top to bottom tank ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Commercial and industrial water treatment solutions for sanitary wastewater sector
Sanitary wastewater comprised of water from toilets, sinks, showers, kitchens, laundries or floor drains can be used as source of feedwater for nonpotable applications after proper treatment. Wastewater from toilets alone or mixed with other wastewater is often called “black” water while wastewater from other sources such as sinks, showers, kitchens and laundries is often called “gray” water. Typical untreated influent characteristics of “black” water include BOD levels ~ 400 ...
By Aqua Clear Water Treatment Specialists based in San Diego, CALIFORNIA (USA).
-
Filtration Solutions for Combining Technologie
The compact Actiflo® Disc combines Actiflo and Hydrotech technologies to provide excellent removal of particles. It efficiently handles both high SS and fluctuating SS loads. The Actiflo® technology is a ballast sand settler that relies on micro sand being mixed with flocculated wastewater and polymers. This creates large, robust flocs of particles in the water, working perfectly with Hydrotech filters that remove ...
By Hydrotech - Veolia Water Technologies AB based in Vellinge, SWEDEN.
-
Regenerative blowers
Regenerative blowers for waste water aeration. Rotary lobe blowers for waste water ...
By Air Power Products Limited (APPL) based in Cambridge, ONTARIO (CANADA).
-
Water quality solutions for improved mixing in rapid mix basins
Mixing is already part of the equation and Medora Corporation equipment can help ensure your rapid mix is a true mix. Better coagulant dispersion & contact helps to further facilitate particulate binding. Better binding means more particulates fall out of suspension. Less particulate suspension means a better treatment ...
By Ixom Watercare based in Dickinson, NORTH DAKOTA (USA).
-
Mixing and aeration Solutions for municipal sector
INVENT offers a whole range of products for the municipal water and wastewater treatment. Our Hyperboloid Mixers are used for precipitation and flocculation in drinking water treatment or are applied for the complete nitrogen elimination in anaerobic and anoxic tanks of wastewater treatment plants. The INVENT Aeration Systems are used in grit chambers, activated sludge tanks or in the sludge treatment process for oxygen transfer or mixing tasks. Using INVENT System Solutions, municipal wastewater is treated ...
By INVENT Umwelt- und Verfahrenstechnik AG based in Erlangen, GERMANY.
-
Pulsair`s industrial mixers for flue gas desulfurization industry
Pulsair Systems is a leading supplier of efficient mixing system for Flue Gas Desulfurization (FGD) for over 25 years. Our mixing process is more effective and energy efficient than mechanical top-entry agitators, side-entry agitators and other types of mixers that are expensive and require more maintenance and consume more ...
By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).
-
Gear Motor for Mixer/Agitator
By SLER Transmission Devices (Hangzhou) Co., Ltd. based in Hangzhou City, CHINA.
-
Wastewater Aeration for Landfills Treating Leachate
If we know that landfill leachate is much higher strength than most residential wastewater, don’t make the mistake of trusting the same aeration system as the municipal plant. EDI’s aeration experts have helped landfills like yours address their leachate with effective, efficient aeration systems assembled from our comprehensive FlexAir® Pro range of aeration membranes and diffusers, whether you need the high density of Streamline™ diffusers, the consistent and durable Matrix™ or Matrix ...
By Environmental Dynamics International (EDI) based in Columbia, MISSOURI (USA).
-
Wastewater Aeration for Pharmaceutical Industry
Pharmaceutical production facilities know that precision is key to maintaining trust with your customers. That’s why so many trust EDI’s aeration experts for help with treating their wastewater: because only EDI has the comprehensive FlexAir Pro range of aeration system components needed to create a finely-tuned system capable of treating their high-strength wastewater consistently, durably, with optimized ...
By Environmental Dynamics International (EDI) based in Columbia, MISSOURI (USA).
-
Electrical Based Tomography Systems for Batch mixing
Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). ...
By Industrial Tomography Systems Ltd. (ITS) based in Manchester, UNITED KINGDOM.
-
Energy savings due to lower header pressure by high performance VACOMASS® control valves
VACOMASS® jet control valve and elliptic diaphragm control valve are especially developed and optimized for control and distribution of air into aeration tanks. They can be operated both with a very low pressure drop at high repeatabilty and control ...
By Binder Group GmbH based in Ulm, GERMANY.
-
Wastewater solutions Wastewater for municipalities
In industrial plants, waste water of municipal structure often accumulates from the canteens and sanitary facilities of the production and office buildings. This can be treated separately to receiving water quality in specially designed and compact treatment ...
By CUSS Chriwa Umwelt-Systemtechnik und Service GmbH based in Hambühren, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you