Wastewater Mixing Equipment For Water And Wastewater Available In Georgia
-
PremiumManufactured by BioMicrobics, Incbased in USA
LIXOR is a submerged aeration system that mixes and aerates wastewater, creating an environment for aerobic bacteria to thrive. These aerobic bacteria are responsible for biodegrading the organic matter in the wastewater. The system can be used in various ways as part of an overall wastewater plant design to help achieve desired treatment ...
-
PremiumManufactured by Proco Products, Inc.based in USA
What Does a Coarse Bubble Diffuser Do? Coarse bubble diffusers aerate or mix wastewater for effluent / sewage treatment and pollution control. A coarse bubble diffuser produces bubbles which rise from the floor of a wastewater treatment plant or sewage treatment tank. They are used in grit chambers, equalization basins, primary and secondary settling ponds, and areas where sediment settling is a ...
-
PremiumManufactured by Texas Boom Company LLCbased in USA
Floating Baffles Curtains are used to control water flow and circulation in ponds and other bodies of water. These are commonly deployed in wastewater treatment ponds, aeration ponds, and mixing ponds. The Baffles are designed to aid with oxygen uptake and retention time. Baffle windows can be positioned vertically in the suspended curtain to achieve desired water flow. Eliminates dead zones and ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The continuous flow Inclined Plate Clarifier with Mix & Flocc Tank separates mechanical and chemical emulsions and colloidal contaminants from wastewater as a single flow-through operation. The use of polymers or other chemical additives will help precipitate the contaminants to the hopper compartment for ...
-
by Symbiona SAbased in POLAND
Top of the top, with to 99% of COD removal, own proprietary anaerobic reactor combinig the best from two worlds – flocullent sludge and memrbane technology as separator. Best for very high COD effluents (up to over 200.000mg/l) that contains lot of TSS up to over 50.000mg/l. Suitable also for treatment of mixes of wastewater and slurries or organic factory waste (ie. flotation sludge, ...
-
Manufactured by B-Safety GmbHbased in GERMANY
ComfortLine thermostatic mixing valve for safety showers. Flow rate: 20 litre / minute at 1 bar dynamic water . Water supplies: 1/2' male. Water outlet: 1/2' male. Adjustment range: 20 - 40°C (preadjustment at 22°C). Scald protection: ...
-
Manufactured by Suma Rührtechnik GmbHbased in GERMANY
Fast-running agitator for aggressive media with low pH ...
-
Manufactured by Caleffi S.p.a.based in ITALY
Boiler protection high-flow thermostatic mixing valve. Changeable thermostatic sensor cartridge. Brass body and lower plug. Max working pressure: 150 psi. Working temp range: 40° - ...
-
Manufactured by Caleffi S.p.a.based in ITALY
Adjustable thermostatic mixing valve for radiant hydronic heating systems and domestic water ...
-
Manufactured by Septech Holdings Limitedbased in UNITED ARAB EMIRATES
MBBR is an activated sludge process that produces a fixed film of biomass on a large population of small, inert carriers or Bio-media. The Bio-media provides a large protected surface area and optimised conditions for the bacteria culture to grow and thrive. The rapid biofilm growth delivers high efficiencies in the biological oxidation of organic constituents in the ...
-
Manufactured by Caleffi S.p.a.based in ITALY
Adjustable thermostatic mixing valve for radiant hydronic heating systems and domestic water ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The INVENT CYBERPITCH - Mixer is particularly used for mixing applications where a high local energy intake is required. In the field of drinking water preparation it is used to thoroughly mix in flocculants and precipitant ideally followed by the well-known INVENT Hyperboloid mixers in the consecutive steps. Also in the wastewater treatment, the CYBERPITCH - Mixer can be used, for instance for ...
-
Manufactured by Entec International BVbased in NETHERLANDS
Type ESKM-9.0 channel mixers for perfect mixing. Also for your WWTP! Independent tests have shown that the ESKM concept is the most efficient of all known static mixers. ESKM mixing elements are ideal for adding chemical agents as a fundamental part of the total water treatment. Overdose due to poor mixing is thus prevented. The saving on chemical agents is therefore considerable! The plug flow ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
The Aquaeromix provides a dual function of directional flow and mixing of oxygen into the wastewater below the surface level. The Self Aspirating Aerator has a unique impeller and vacuum chamber design to drawing air below the surface water level. The Aquaeromix mixes the air into the water and produces fine to medium sized Oxygen bubbles. These in turn provide a directional flow. The rotating ...
-
Manufactured by Smith & Loveless Inc.based in USA
Smith & Loveless' vertical arcuate impeller blade design is more efficient than the radial vane design. The Smith & Loveless mechanical aerator blade curvature yields high pumpage with minimal head, thus maximizing oxygen transfer and mixing. The Smith & Loveless mechanical aerator comes in Fixed and Floating ...
-
Manufactured by Newterra, Ltd.based in CANADA
Still a common method of BOD & TSS treatment, lagoon wastewater treatment systems continue to be a large portion of the wastewater market all over the world. Many municipalities and industries continue to use flow through aerated lagoons as their main method of biological treatment. One way to economically increase the capacity of existing facultative lagoons is to provide aeration, which ...
-
Manufactured by Newster System S.r.l.based in ITALY
The plant is designed for on-site installation in urban hospitals, hospitals lacking connection to sewerage systems and civil water treatment plants. The disinfection system is particulary dedicated to the wastewater of infectious desease wards, operating theatres, ICU and haemodialysis wards. SWT ensures the mechanical treatment and final chemical disinfection of wastewater without producing ...
-
Manufactured by Smith & Loveless Inc.based in USA
BIOMIXER Aeration & Mixing System by S&L is a patented, award-winning system that integrates the efficiency of fine bubbles diffusion with tremendous mixing capability in a single pre-engineered ...
-
Manufactured by SCM Tecnologiebased in ITALY
These mixers are ideal for mixing and homogenization of liquids and are the result of our long experience in water treatment. Different rotation speeds, obtained using multipole motors, propellers with self-cleaning profiles and two or three blades, outside components in cast iron, make mixers MX-gi suitable for a wide range of application, with top hydraulic efficiency results. A special lifting ...
-
Manufactured by Pulsair Systems, Incbased in USA
Improve top entry mixer agitation for all types of tank mixing applications in any size tank. Top entry mixers from Pulsair® Systems are the best and most cost-effective in the world for industrial top entry mixing tanks. The Pulsair top entry mixing process uses large compressed air mixing bubbles to mix liquids faster and more efficiently than mechanical top entry mixers. Customers can ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you