Wastewater Mixing Equipment For Water And Wastewater In Australasia
-
Manufactured by Mena Water FZCbased in UNITED ARAB EMIRATES
Fine bubble diffusers are mainly used for oxygen transfer into biological wastewater treatment. These products can also be used for any kind of transfer of gases into liquids. Diffusers are fixed at the bottom of aeration tanks to produce a huge number of very fine air bubbles. The air bubbles rise to the surface providing enough amount of oxygen to the ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The complete answer to Low-Speed, highly energy efficient submersible mixing in a wide range of applications in industry and municipal treatment ...
-
Manufactured by DBS Manufacturing, Inc.based in USA
The DBS Hyperbolic Mixer rotor is specifically designed to operate at the bottom of a mixing basin where the rotor will efficiently draw water down and discharge it in a horizontal direction. This induced flow will circulate the water in the tank from bottom to top to maintain all solids in ...
-
Manufactured by Pumpability Pty Limitedbased in AUSTRALIA
Hose bore diameter 12–55 m. Cast iron construction. Minimum flow rate 84 L/h. Maximum flow rate 20,000 L/h. Maximum pressure 15 bar. Self-priming to 9 mwc. Speeds 5 – 133 rpm. Reversible flow. Vertical or horizontal connection ...
-
Manufactured by W-Rix Ltdbased in FINLAND
Waterix DENIT combination devices are an optimal device where the municipal or industrial wastewater mixing and aeration is needed to alternate. When the water flows from bottom to surface the DENIT aerates and mixes the water. As soon as the impeller rotation direction is changed and water starts to flow from surface to bottom, the aeration stops and unit acts only as a powerful mixer. DENIT ...
-
Manufactured by Aqseptence Group GmbHbased in GERMANY
The utilisation of the Intech TSM-Module improves the mixing of the precipitant and increases the efficiency of the chemical phosphate ...
-
Manufactured by EnviroPro Alternatives Pty Ltdbased in AUSTRALIA
An engineered micronutrient blend specifically designed to enhance microbial activity of wastewater treatment processes.Stimulates growth and reporduction of beneficial non-odour producing facultative bacteria in a cost-effective manner. It reduces bacterial stress and generation of odours from a variety of wastewaters, including Leachate Lagoons and Holding ...
-
Manufactured by Pumpability Pty Limitedbased in AUSTRALIA
Hose bore diameter 65 – 100 mm. Cast iron construction. Minimum flow rate 3,100 L/h. Maximum flow rate 65,200 L/h. Maximum pressure 15 bar. Self-priming to 9 mwc. Speeds 5 – 79 rpm. Reversible ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Intended for indoor use, the 300 litre tank and 3kW heater ensure the delivery of tepid water for the ANSI recommended minimum period of 15 minutes at 76 litres per minute. Available for hazardous and non-hazardous environments. High flow rate thermostatically controlled mixing valve ensures the temperature is maintained at between 20-25°C. Eye/face wash with integral lid ensures that the ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The LM™ Mixer is designed to mix various sludge types in all anaerobic digestion applications, in order to achieve a homogeneous mixture in tanks, while using up to 70% less power than with conventional mixers. The LM™ Mixer oscillating motion produces a flow pattern that approaches nearly isotropic (uniform) mixing without the turbulence intensity or vortices observed with other ...
-
Manufactured by Fluence Corporationbased in USA
Riptide's versatile and sturdy design provides supplemental directional mixing beneath the water's surface to prevent spraying and splashing. With its rugged construction and low-maintenance design, the RIPTIDE direct-drive surface mixer delivers dependable and economic performance mounted at a wide range of angles. Featuring a high-efficiency, slow-speed propeller, the Riptide combines all or ...
-
Manufactured by Smith & Loveless Inc.based in USA
Smith & Loveless' vertical arcuate impeller blade design is more efficient than the radial vane design. The Smith & Loveless mechanical aerator blade curvature yields high pumpage with minimal head, thus maximizing oxygen transfer and mixing. The Smith & Loveless mechanical aerator comes in Fixed and Floating ...
-
Manufactured by Septech Holdings Limitedbased in UNITED ARAB EMIRATES
MBBR is an activated sludge process that produces a fixed film of biomass on a large population of small, inert carriers or Bio-media. The Bio-media provides a large protected surface area and optimised conditions for the bacteria culture to grow and thrive. The rapid biofilm growth delivers high efficiencies in the biological oxidation of organic constituents in the ...
-
Manufactured by Smith & Loveless Inc.based in USA
BIOMIXER Aeration & Mixing System by S&L is a patented, award-winning system that integrates the efficiency of fine bubbles diffusion with tremendous mixing capability in a single pre-engineered ...
-
Manufactured by Ixom Watercarebased in USA
Floating, AC powered, circulation equipment for wastewater treatment and freshwater applications. Continuous operation on single-phase AC ...
-
Manufactured by W-Rix Ltdbased in FINLAND
Waterix DENIT combination devices are an optimal device where the municipal or industrial wastewater mixing and aeration is needed to alternate. When the water flows from bottom to surface the DENIT aerates and mixes the water. As soon as the impeller rotation direction is changed and water starts to flow from surface to bottom, the aeration stops and unit acts only as a powerful mixer. DENIT ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
Biosep is an aerobic biological treatment process treating municipal and industrial effluents. ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The ABS Nopon OKI submersible aerator is a heavy-duty, non-clogging, gentle mixing unit which can operate both as an aerator and as a mixer for wastewater and water treatment in municipal and industrial plants. It is used for sludge stabilization in SBR, MBR, and MBBR ...
-
Manufactured by Liquitekbased in AUSTRALIA
The EnviroMix cutting-edge, patented technology offers comprehensive processes that enable treatment plants to operate more efficiently while meeting the growing demand for nutrient removal for the water & wastewater industry. EnviroMix mixing equipment systems create solutions that provide uniform mixing, save energy, greatly reduce operation and maintenance costs, and help solve nutrient ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The INVENT CYBERPITCH - Mixer is particularly used for mixing applications where a high local energy intake is required. In the field of drinking water preparation it is used to thoroughly mix in flocculants and precipitant ideally followed by the well-known INVENT Hyperboloid mixers in the consecutive steps. Also in the wastewater treatment, the CYBERPITCH - Mixer can be used, for instance for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you